← Commit history
sn74hc175dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -68,13 +68,13 @@ "number": "1", "name": "CLR", "type": "input",- "description": "Active-low asynchronous direct clear input shared by all four flip-flops; when LOW, forces all Q outputs LOW and all Q\u0304 outputs HIGH regardless of CLK or D; setup time before CLK\u2191 \u2265 20 ns at VCC = 4.5 V."+ "description": "Active-low asynchronous direct clear input shared by all four flip-flops; when LOW, forces all Q outputs LOW and all Q̄ outputs HIGH regardless of CLK or D; setup time before CLK↑ ≥ 20 ns at VCC = 4.5 V." }, { "number": "2", "name": "1Q", "type": "output",- "description": "Non-inverting output of flip-flop 1; captures the state of 1D on the positive-going edge of CLK; IOH = \u22124 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V."+ "description": "Non-inverting output of flip-flop 1; captures the state of 1D on the positive-going edge of CLK; IOH = −4 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V." }, { "number": "3",@@ -104,13 +104,13 @@ "number": "7", "name": "2Q", "type": "output",- "description": "Non-inverting output of flip-flop 2; captures the state of 2D on the positive-going edge of CLK; IOH = \u22124 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V."+ "description": "Non-inverting output of flip-flop 2; captures the state of 2D on the positive-going edge of CLK; IOH = −4 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V." }, { "number": "8", "name": "GND", "type": "power_in",- "description": "Ground reference; continuous current through GND pin limited to \u00b150 mA."+ "description": "Ground reference; continuous current through GND pin limited to ±50 mA." }, { "number": "9",@@ -122,7 +122,7 @@ "number": "10", "name": "3Q", "type": "output",- "description": "Non-inverting output of flip-flop 3; captures the state of 3D on the positive-going edge of CLK; IOH = \u22124 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V."+ "description": "Non-inverting output of flip-flop 3; captures the state of 3D on the positive-going edge of CLK; IOH = −4 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V." }, { "number": "11",@@ -152,13 +152,13 @@ "number": "15", "name": "4Q", "type": "output",- "description": "Non-inverting output of flip-flop 4; captures the state of 4D on the positive-going edge of CLK; IOH = \u22124 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V."+ "description": "Non-inverting output of flip-flop 4; captures the state of 4D on the positive-going edge of CLK; IOH = −4 mA at VCC = 4.5 V, tpd = 30 ns max at VCC = 4.5 V." }, { "number": "16", "name": "VCC", "type": "power_in",- "description": "Positive supply voltage; recommended operating range 2 V to 6 V; bypass with 0.1 \u00b5F capacitor placed as close to the pin as possible; ICC max = 80 \u00b5A at VCC = 6 V."+ "description": "Positive supply voltage; recommended operating range 2 V to 6 V; bypass with 0.1 µF capacitor placed as close to the pin as possible; ICC max = 80 µA at VCC = 6 V." } ], "provenance": {@@ -180,6 +180,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74hc175dr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74hc175dr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a7c4a5ff14fb9e4c4eb2dc5c57f089acc2a5a3b466531637eaa74c5234465598",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -165,7 +165,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74hc175dr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74hc175dr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 9.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a7c4a5ff14fb9e4c4eb2dc5c57f089acc2a5a3b466531637eaa74c5234465598",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -212,4 +252,4 @@ "visibility": { "public": true }-}+}