main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn74hc174pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn74hc174pwr: viewers · Ray
package.json sn74hc174pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
page.json sn74hc174pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
README.md Initial commit: component/sn74hc174pwr · Ray
sn74hc174pwr-etched.fit.json sn74hc174pwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74hc174pwr-etched.glb sn74hc174pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
sn74hc174pwr-etched.step sn74hc174pwr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
sn74hc174pwr.glb Publish 0.1.0 · Ray
sn74hc174pwr.kicad_mod Publish 0.1.0 · Ray
sn74hc174pwr.kicad_sym Publish 0.1.0 · Ray
sn74hc174pwr.lbr Publish 0.1.0 · Ray
sn74hc174pwr.step Publish 0.1.0 · Ray

SN74HC174PWR

Texas Instruments · Flip Flops · TSSOP-16

SN74HC174PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CLR input Active-low direct clear input, common to all six flip-flops; when CLR is low the outputs are forced low regardless of the D or CLK inputs.
2 1Q output Output of flip-flop 1, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads.
3 1D input Data input to flip-flop 1, transferred to the Q1 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA.
4 2D input Data input to flip-flop 2, transferred to the Q2 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA.
5 2Q output Output of flip-flop 2, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads.
6 3D input Data input to flip-flop 3, transferred to the Q3 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA.
7 3Q output Output of flip-flop 3, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads.
8 GND power_in Ground/common supply return for the device.
9 CLK input Common positive-edge-triggered clock input for all six flip-flops; data at D inputs meeting setup time is transferred to the outputs on the CLK low-to-high transition.
10 4Q output Output of flip-flop 4, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads.
11 4D input Data input to flip-flop 4, transferred to the Q4 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA.
12 5Q output Output of flip-flop 5, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads.
13 5D input Data input to flip-flop 5, transferred to the Q5 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA.
14 6D input Data input to flip-flop 6, transferred to the Q6 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA.
15 6Q output Output of flip-flop 6, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads.
16 VCC power_in Positive supply voltage, recommended operating range 2 V to 6 V (typical 5 V), with a 0.1-µF bypass capacitor recommended as close to this pin as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Logic
Pins 16

CAD (KiCad official)

  • Symbol: SN74HC174PWR
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: sn74hc174pwr-etched.step / sn74hc174pwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74hc174pwr.step / sn74hc174pwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 9b979c6ba2b4b122, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (text+vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF