← Commit history

sn74hc174pwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·84be7b79d2 · ·parent 115f1b9
2 files changed +97−17
package.json+55−15
@@ -59,37 +59,37 @@         "number": "2",         "name": "1Q",         "type": "output",-        "description": "Output of flip-flop 1, capable of \u00b14-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."+        "description": "Output of flip-flop 1, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."       },       {         "number": "3",         "name": "1D",         "type": "input",-        "description": "Data input to flip-flop 1, transferred to the Q1 output on the positive-going edge of CLK when CLR is high, with max input current of 1 \u00b5A."+        "description": "Data input to flip-flop 1, transferred to the Q1 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA."       },       {         "number": "4",         "name": "2D",         "type": "input",-        "description": "Data input to flip-flop 2, transferred to the Q2 output on the positive-going edge of CLK when CLR is high, with max input current of 1 \u00b5A."+        "description": "Data input to flip-flop 2, transferred to the Q2 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA."       },       {         "number": "5",         "name": "2Q",         "type": "output",-        "description": "Output of flip-flop 2, capable of \u00b14-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."+        "description": "Output of flip-flop 2, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."       },       {         "number": "6",         "name": "3D",         "type": "input",-        "description": "Data input to flip-flop 3, transferred to the Q3 output on the positive-going edge of CLK when CLR is high, with max input current of 1 \u00b5A."+        "description": "Data input to flip-flop 3, transferred to the Q3 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA."       },       {         "number": "7",         "name": "3Q",         "type": "output",-        "description": "Output of flip-flop 3, capable of \u00b14-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."+        "description": "Output of flip-flop 3, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."       },       {         "number": "8",@@ -107,43 +107,43 @@         "number": "10",         "name": "4Q",         "type": "output",-        "description": "Output of flip-flop 4, capable of \u00b14-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."+        "description": "Output of flip-flop 4, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."       },       {         "number": "11",         "name": "4D",         "type": "input",-        "description": "Data input to flip-flop 4, transferred to the Q4 output on the positive-going edge of CLK when CLR is high, with max input current of 1 \u00b5A."+        "description": "Data input to flip-flop 4, transferred to the Q4 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA."       },       {         "number": "12",         "name": "5Q",         "type": "output",-        "description": "Output of flip-flop 5, capable of \u00b14-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."+        "description": "Output of flip-flop 5, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."       },       {         "number": "13",         "name": "5D",         "type": "input",-        "description": "Data input to flip-flop 5, transferred to the Q5 output on the positive-going edge of CLK when CLR is high, with max input current of 1 \u00b5A."+        "description": "Data input to flip-flop 5, transferred to the Q5 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA."       },       {         "number": "14",         "name": "6D",         "type": "input",-        "description": "Data input to flip-flop 6, transferred to the Q6 output on the positive-going edge of CLK when CLR is high, with max input current of 1 \u00b5A."+        "description": "Data input to flip-flop 6, transferred to the Q6 output on the positive-going edge of CLK when CLR is high, with max input current of 1 µA."       },       {         "number": "15",         "name": "6Q",         "type": "output",-        "description": "Output of flip-flop 6, capable of \u00b14-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."+        "description": "Output of flip-flop 6, capable of ±4-mA output drive at VCC=5 V (IOH=-4mA, IOL=4mA) and driving up to 10 LSTTL loads."       },       {         "number": "16",         "name": "VCC",         "type": "power_in",-        "description": "Positive supply voltage, recommended operating range 2 V to 6 V (typical 5 V), with a 0.1-\u00b5F bypass capacitor recommended as close to this pin as possible."+        "description": "Positive supply voltage, recommended operating range 2 V to 6 V (typical 5 V), with a 0.1-µF bypass capacitor recommended as close to this pin as possible."       }     ],     "provenance": {@@ -180,6 +180,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn74hc174pwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sn74hc174pwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "514dee5890f5ed21dc811f7725ac13ddf72af112eec3b0f72e8f1a13e398ea1a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -165,7 +165,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "sn74hc174pwr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "sn74hc174pwr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          5.0,+          1.1+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "514dee5890f5ed21dc811f7725ac13ddf72af112eec3b0f72e8f1a13e398ea1a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -212,4 +252,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}