component
SN74HC14DBR
Public Made by Adomby adom
Texas Instruments Inverters, SSOP-14-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
sn74hc14dbr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+97−17
package.json+55−15@@ -53,37 +53,37 @@ "number": "1", "name": "1A", "type": "input",- "description": "Channel 1 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis \u0394VT (min 0.2V at 2V, typical 0.6V at 2V supply)"+ "description": "Channel 1 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis ΔVT (min 0.2V at 2V, typical 0.6V at 2V supply)" }, { "number": "2", "name": "1Y", "type": "output",- "description": "Channel 1 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to \u00b125 mA"+ "description": "Channel 1 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to ±25 mA" }, { "number": "3", "name": "2A", "type": "input",- "description": "Channel 2 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis \u0394VT (min 0.2V at 2V, typical 0.6V at 2V supply)"+ "description": "Channel 2 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis ΔVT (min 0.2V at 2V, typical 0.6V at 2V supply)" }, { "number": "4", "name": "2Y", "type": "output",- "description": "Channel 2 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to \u00b125 mA"+ "description": "Channel 2 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to ±25 mA" }, { "number": "5", "name": "3A", "type": "input",- "description": "Channel 3 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis \u0394VT (min 0.2V at 2V, typical 0.6V at 2V supply)"+ "description": "Channel 3 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis ΔVT (min 0.2V at 2V, typical 0.6V at 2V supply)" }, { "number": "6", "name": "3Y", "type": "output",- "description": "Channel 3 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to \u00b125 mA"+ "description": "Channel 3 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to ±25 mA" }, { "number": "7",@@ -95,43 +95,43 @@ "number": "8", "name": "4Y", "type": "output",- "description": "Channel 4 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to \u00b125 mA"+ "description": "Channel 4 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to ±25 mA" }, { "number": "9", "name": "4A", "type": "input",- "description": "Channel 4 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis \u0394VT (min 0.2V at 2V, typical 0.6V at 2V supply)"+ "description": "Channel 4 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis ΔVT (min 0.2V at 2V, typical 0.6V at 2V supply)" }, { "number": "10", "name": "5Y", "type": "output",- "description": "Channel 5 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to \u00b125 mA"+ "description": "Channel 5 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to ±25 mA" }, { "number": "11", "name": "5A", "type": "input",- "description": "Channel 5 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis \u0394VT (min 0.2V at 2V, typical 0.6V at 2V supply)"+ "description": "Channel 5 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis ΔVT (min 0.2V at 2V, typical 0.6V at 2V supply)" }, { "number": "12", "name": "6Y", "type": "output",- "description": "Channel 6 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to \u00b125 mA"+ "description": "Channel 6 inverted output (Y = NOT A) with balanced CMOS push-pull output; sources/sinks continuous up to ±25 mA" }, { "number": "13", "name": "6A", "type": "input",- "description": "Channel 6 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis \u0394VT (min 0.2V at 2V, typical 0.6V at 2V supply)"+ "description": "Channel 6 Schmitt-trigger inverter input; accepts 0V to VCC with hysteresis ΔVT (min 0.2V at 2V, typical 0.6V at 2V supply)" }, { "number": "14", "name": "VCC", "type": "power_in",- "description": "Positive power supply voltage; operating range 2V minimum to 6V maximum with 5V nominal (source current limit \u00b150 mA continuous through VCC)"+ "description": "Positive power supply voltage; operating range 2V minimum to 6V maximum with 5V nominal (source current limit ±50 mA continuous through VCC)" } ], "provenance": {@@ -166,6 +166,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74hc14dbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b6842172112d57dc0e70c4a107e6e3624474bd219b847f0f2ad2484167c8e6a4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74hc14dbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "fbf64297b58a2c95f5215144afeb48cffd5963f65fa1b7f40a2e2c655dcfca34",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -151,7 +151,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "sn74hc14dbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b6842172112d57dc0e70c4a107e6e3624474bd219b847f0f2ad2484167c8e6a4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn74hc14dbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "fbf64297b58a2c95f5215144afeb48cffd5963f65fa1b7f40a2e2c655dcfca34",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -199,4 +239,4 @@ "public": true }, "updated_at": "2026-09-25T07:00:04.472Z"-}+}