main
Ray
Publish 0.1.0
f463a53
SN74F163AN
Texas Instruments · Counters / Dividers · PDIP-16
SN74F163AN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | A low logic level at the clear (CLR) input sets all four flip-flop outputs to low after the next low-to-high transition of the clock, regardless of the levels of ENP and ENT. |
| 2 | CLK | input | The buffered clock (CLK) input triggers the four flip-flops on the rising (positive-going) edge of CLK. |
| 3 | A | input | Data input A is the preset data bit loaded synchronously when LOAD is low. |
| 4 | B | input | Data input B is the preset data bit loaded synchronously when LOAD is low. |
| 5 | C | input | Data input C is the preset data bit loaded synchronously when LOAD is low. |
| 6 | D | input | Data input D is the preset data bit loaded synchronously when LOAD is low. |
| 7 | ENP | input | Count-enable input ENP; both ENP and ENT must be high to count. |
| 8 | GND | power_in | Ground reference pin for the device. |
| 9 | LOAD | input | A low logic level at LOAD disables the counter and causes the outputs to agree with the setup data after the next clock pulse. |
| 10 | ENT | input | Count-enable input ENT; ENT is fed forward to enable RCO. |
| 11 | QD | output | Counter output QD, the most significant bit of the 4-bit binary count. |
| 12 | QC | output | Counter output QC, a bit of the 4-bit binary count. |
| 13 | QB | output | Counter output QB, a bit of the 4-bit binary count. |
| 14 | QA | output | Counter output QA, the least significant bit of the 4-bit binary count. |
| 15 | RCO | output | Ripple-carry output RCO produces a high-logic-level pulse while the count is 15 (HHHH) when ENT is high. |
| 16 | VCC | power_in | Supply voltage pin; recommended VCC is 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Logic ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 6 | |
| High-level input voltage | VIH | 2 | V | 6 | |||
| Low-level input voltage | VIL | 0.8 | V | 6 | |||
| High-level output current | IOH | -1 | mA | 6 | |||
| Low-level output current | IOL | 20 | mA | 6 | |||
| Operating free-air temperature | TA | 0 | 70 | °C | 6 | ||
| Input clamp current | IIK | -18 | mA | 6 | |||
| Input clamp voltage | VIK | -1.2 | V | VCC = 4.5 V, II = -18 mA | 6 | ||
| High-level output voltage | VOH | 2.5 | 3.4 | V | VCC = 4.5 V, IOH =, 1 mA | 6 | |
| High-level output voltage | VOH | 2.7 | V | VCC = 4.75 V, IOH =, 1 mA | 6 | ||
| Low-level output voltage | VOL | 0.3 | 0.5 | V | VCC = 4.5 V, IOL = 20 mA | 6 | |
| Input current | II | 0.1 | mA | VCC = 5.5 V, VI = 7 V | 6 | ||
| High-level input current | IIH | 20 | µA | VCC = 5.5 V, VI = 2.7 V | 6 | ||
| Low-level input current ENP, CLK, A, B, C, D | IIL | -0.6 | mA | VCC = 5.5 V, VI = 0.5 V | 6 | ||
| Low-level input current ENT, LOAD | IIL | -1.2 | mA | VCC = 5.5 V, VI = 0.5 V | 6 | ||
| Low-level input current CLR | IIL | -1.2 | mA | VCC = 5.5 V, VI = 0.5 V | 6 | ||
| Short-circuit output current | IOS | -60 | -150 | mA | VCC = 5.5 V, VO = 0 | 6 | |
| Supply current | ICC | 37 | 55 | mA | VCC = 5.5 V | 6 | |
| Supply voltage range | VCC | -0.5 | 7 | V | 6 | ||
| Input voltage range | VI | -1.2 | 7 | V | see Note 1 | 6 | |
| Input current range | II | -30 | 5 | mA | 6 | ||
| Voltage applied to any output in the high state | -0.5 | V | up to VCC | 6 | |||
| Current into any output in the low state | 40 | mA | 6 | ||||
| Storage temperature range | Tstg | -65 | 150 | °C | 6 | ||
| Package thermal impedance, N package | θJA | 67 | °C/W | N package | 6 |
CAD (KiCad official)
- Symbol:
SN74F163AN - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74f163an-etched.step/sn74f163an-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74f163an.step/sn74f163an.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
258b08f1fad4d491, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74F163AN
**Texas Instruments** · Counters / Dividers · PDIP-16
SN74F163AN from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLR | input | A low logic level at the clear (CLR) input sets all four flip-flop outputs to low after the next low-to-high transition of the clock, regardless of the levels of ENP and ENT. |
| 2 | CLK | input | The buffered clock (CLK) input triggers the four flip-flops on the rising (positive-going) edge of CLK. |
| 3 | A | input | Data input A is the preset data bit loaded synchronously when LOAD is low. |
| 4 | B | input | Data input B is the preset data bit loaded synchronously when LOAD is low. |
| 5 | C | input | Data input C is the preset data bit loaded synchronously when LOAD is low. |
| 6 | D | input | Data input D is the preset data bit loaded synchronously when LOAD is low. |
| 7 | ENP | input | Count-enable input ENP; both ENP and ENT must be high to count. |
| 8 | GND | power_in | Ground reference pin for the device. |
| 9 | LOAD | input | A low logic level at LOAD disables the counter and causes the outputs to agree with the setup data after the next clock pulse. |
| 10 | ENT | input | Count-enable input ENT; ENT is fed forward to enable RCO. |
| 11 | QD | output | Counter output QD, the most significant bit of the 4-bit binary count. |
| 12 | QC | output | Counter output QC, a bit of the 4-bit binary count. |
| 13 | QB | output | Counter output QB, a bit of the 4-bit binary count. |
| 14 | QA | output | Counter output QA, the least significant bit of the 4-bit binary count. |
| 15 | RCO | output | Ripple-carry output RCO produces a high-logic-level pulse while the count is 15 (HHHH) when ENT is high. |
| 16 | VCC | power_in | Supply voltage pin; recommended VCC is 4.5 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Logic ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | | 6 |
| High-level input voltage | VIH | 2 | | | V | | 6 |
| Low-level input voltage | VIL | | | 0.8 | V | | 6 |
| High-level output current | IOH | | | -1 | mA | | 6 |
| Low-level output current | IOL | | | 20 | mA | | 6 |
| Operating free-air temperature | TA | 0 | | 70 | °C | | 6 |
| Input clamp current | IIK | | | -18 | mA | | 6 |
| Input clamp voltage | VIK | | | -1.2 | V | VCC = 4.5 V, II = -18 mA | 6 |
| High-level output voltage | VOH | 2.5 | 3.4 | | V | VCC = 4.5 V, IOH =, 1 mA | 6 |
| High-level output voltage | VOH | 2.7 | | | V | VCC = 4.75 V, IOH =, 1 mA | 6 |
| Low-level output voltage | VOL | | 0.3 | 0.5 | V | VCC = 4.5 V, IOL = 20 mA | 6 |
| Input current | II | | | 0.1 | mA | VCC = 5.5 V, VI = 7 V | 6 |
| High-level input current | IIH | | | 20 | µA | VCC = 5.5 V, VI = 2.7 V | 6 |
| Low-level input current ENP, CLK, A, B, C, D | IIL | | | -0.6 | mA | VCC = 5.5 V, VI = 0.5 V | 6 |
| Low-level input current ENT, LOAD | IIL | | | -1.2 | mA | VCC = 5.5 V, VI = 0.5 V | 6 |
| Low-level input current CLR | IIL | | | -1.2 | mA | VCC = 5.5 V, VI = 0.5 V | 6 |
| Short-circuit output current | IOS | -60 | | -150 | mA | VCC = 5.5 V, VO = 0 | 6 |
| Supply current | ICC | | 37 | 55 | mA | VCC = 5.5 V | 6 |
| Supply voltage range | VCC | -0.5 | | 7 | V | | 6 |
| Input voltage range | VI | -1.2 | | 7 | V | see Note 1 | 6 |
| Input current range | II | -30 | | 5 | mA | | 6 |
| Voltage applied to any output in the high state | | -0.5 | | | V | up to VCC | 6 |
| Current into any output in the low state | | | | 40 | mA | | 6 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 6 |
| Package thermal impedance, N package | θJA | | 67 | | °C/W | N package | 6 |
## CAD (KiCad official)
- Symbol: `SN74F163AN`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files: `sn74f163an-etched.step` / `sn74f163an-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74f163an.step` / `sn74f163an.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/sdfs088a/sdfs088a.pdf) (16 pp, sha256 `258b08f1fad4d491`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74f163an-datasheet.pdf)