← Commit history

Initial commit: component/sn74f161adr

Ray ·0329701338 ·
2 files changed +256
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74F161ADR++**Texas Instruments** · Counters, Dividers · SOIC-16++SN74F161ADR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CLR | input | Asynchronous clear input; low logic level sets all four flip-flop outputs to low, independent of clock, load, and count-enable inputs. |+| 2 | CLK | input | Buffered clock input; triggers all four flip-flops on the rising (positive-going) edge, providing synchronous operation. |+| 3 | A | input | Preset data input A; loaded into QA output on next clock pulse when LOAD is low. |+| 4 | B | input | Preset data input B; loaded into QB output on next clock pulse when LOAD is low. |+| 5 | C | input | Preset data input C; loaded into QC output on next clock pulse when LOAD is low. |+| 6 | D | input | Preset data input D; loaded into QD output on next clock pulse when LOAD is low. |+| 7 | ENP | input | Count enable parallel input; counter counts only when both ENP and ENT are high. |+| 8 | GND | power_in | Ground; circuit return and negative terminal of power supply. |+| 9 | VCC | power_in | Positive supply voltage; recommended operating range 4.5 V to 5.5 V, nominal 5 V. |+| 10 | RCO | output | Ripple-carry output; produces high-logic-level pulse while count is 15 (HHHH) when ENT is high, for cascading counters. |+| 11 | QA | output | Output for bit A of the 4-bit binary counter; changes synchronously with clock when counter is enabled. |+| 12 | QB | output | Output for bit B of the 4-bit binary counter; changes synchronously with clock when counter is enabled. |+| 13 | QC | output | Output for bit C of the 4-bit binary counter; changes synchronously with clock when counter is enabled. |+| 14 | QD | output | Output for bit D of the 4-bit binary counter; changes synchronously with clock when counter is enabled. |+| 15 | ENT | input | Count enable trickle input; fed forward to enable RCO output, counter counts only when both ENP and ENT are high. |+| 16 | LOAD | input | Synchronous load/preset input; low logic level causes outputs to agree with preset data after next clock pulse, disabling count function. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74F161ADR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74f161adr-etched.step` / `sn74f161adr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74f161adr.step` / `sn74f161adr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74f161a.pdf) (19 pp, sha256 `7d7adc74f7e40595`, retrieved 2026-09-27, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74f161adr-datasheet.pdf)
page.jsonadded+204
@@ -0,0 +1,204 @@+{+  "slug": "sn74f161adr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Counters, Dividers, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74f161adr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74f161adr.kicad_sym",+    "sn74f161adr.kicad_mod",+    "sn74f161adr.glb",+    "sn74f161adr.step",+    "sn74f161adr.lbr",+    "docs/hero.png",+    "docs/sn74f161adr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74F161ADR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Counters, Dividers",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74f161a.pdf",+    "parts": {+      "symbol": "sn74f161adr.kicad_sym",+      "footprint": "sn74f161adr.kicad_mod",+      "model_3d": "sn74f161adr-etched.glb",+      "model_3d_plain": "sn74f161adr.glb",+      "model_3d_step": "sn74f161adr-etched.step",+      "model_3d_step_plain": "sn74f161adr.step",+      "lbr": "sn74f161adr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2868663",+      "digikey": "296-14809-2-ND",+      "mouser": "595-SN74F161ADR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T01:50:30Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-14809-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-SN74F161ADR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "CLR",+        "type": "input",+        "description": "Asynchronous clear input; low logic level sets all four flip-flop outputs to low, independent of clock, load, and count-enable inputs."+      },+      {+        "number": "2",+        "name": "CLK",+        "type": "input",+        "description": "Buffered clock input; triggers all four flip-flops on the rising (positive-going) edge, providing synchronous operation."+      },+      {+        "number": "3",+        "name": "A",+        "type": "input",+        "description": "Preset data input A; loaded into QA output on next clock pulse when LOAD is low."+      },+      {+        "number": "4",+        "name": "B",+        "type": "input",+        "description": "Preset data input B; loaded into QB output on next clock pulse when LOAD is low."+      },+      {+        "number": "5",+        "name": "C",+        "type": "input",+        "description": "Preset data input C; loaded into QC output on next clock pulse when LOAD is low."+      },+      {+        "number": "6",+        "name": "D",+        "type": "input",+        "description": "Preset data input D; loaded into QD output on next clock pulse when LOAD is low."+      },+      {+        "number": "7",+        "name": "ENP",+        "type": "input",+        "description": "Count enable parallel input; counter counts only when both ENP and ENT are high."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; circuit return and negative terminal of power supply."+      },+      {+        "number": "9",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage; recommended operating range 4.5 V to 5.5 V, nominal 5 V."+      },+      {+        "number": "10",+        "name": "RCO",+        "type": "output",+        "description": "Ripple-carry output; produces high-logic-level pulse while count is 15 (HHHH) when ENT is high, for cascading counters."+      },+      {+        "number": "11",+        "name": "QA",+        "type": "output",+        "description": "Output for bit A of the 4-bit binary counter; changes synchronously with clock when counter is enabled."+      },+      {+        "number": "12",+        "name": "QB",+        "type": "output",+        "description": "Output for bit B of the 4-bit binary counter; changes synchronously with clock when counter is enabled."+      },+      {+        "number": "13",+        "name": "QC",+        "type": "output",+        "description": "Output for bit C of the 4-bit binary counter; changes synchronously with clock when counter is enabled."+      },+      {+        "number": "14",+        "name": "QD",+        "type": "output",+        "description": "Output for bit D of the 4-bit binary counter; changes synchronously with clock when counter is enabled."+      },+      {+        "number": "15",+        "name": "ENT",+        "type": "input",+        "description": "Count enable trickle input; fed forward to enable RCO output, counter counts only when both ENP and ENT are high."+      },+      {+        "number": "16",+        "name": "LOAD",+        "type": "input",+        "description": "Synchronous load/preset input; low logic level causes outputs to agree with preset data after next clock pulse, disabling count function."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 19,+        "cost_usd": 0.1963,+        "at": "2026-09-27T01:50:08"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74f161a.pdf",+        "pages": 19,+        "sha256": "7d7adc74f7e40595",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file