← Commit history

Initial commit: component/sn74f112dr

Ray ·dabba51ece ·
2 files changed +256
README.mdadded+52
@@ -0,0 +1,52 @@+# SN74F112DR++**Texas Instruments** · Flip Flops · SOIC-16++SN74F112DR from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1CLK | input | Negative-edge-triggered clock input for flip-flop 1; data transfer occurs when CLK makes negative-going transition. |+| 2 | 1K | input | K input for flip-flop 1; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with J controls Q output. |+| 3 | 1J | input | J input for flip-flop 1; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with K controls Q output. |+| 4 | 1PRE | input | Preset input for flip-flop 1 (active low); forces Q = H and Q̄ = L when PRE = L, regardless of clock or other inputs. |+| 5 | 1Q | output | Q output for flip-flop 1; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA). |+| 6 | 1Q̄ | output | Inverted Q output for flip-flop 1; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA); complements 1Q. |+| 7 | 2Q̄ | output | Inverted Q output for flip-flop 2; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA); complements 2Q. |+| 8 | GND | power_in | Ground; 0 V reference for all logic signals and circuits. |+| 9 | 2Q | output | Q output for flip-flop 2; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA). |+| 10 | 2PRE | input | Preset input for flip-flop 2 (active low); forces Q = H and Q̄ = L when PRE = L, regardless of clock or other inputs. |+| 11 | 2J | input | J input for flip-flop 2; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with K controls Q output. |+| 12 | 2K | input | K input for flip-flop 2; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with J controls Q output. |+| 13 | 2CLK | input | Negative-edge-triggered clock input for flip-flop 2; data transfer occurs when CLK makes negative-going transition. |+| 14 | 2CLR | input | Clear input for flip-flop 2 (active low); forces Q = L and Q̄ = H when CLR = L, regardless of clock or other inputs. |+| 15 | 1CLR | input | Clear input for flip-flop 1 (active low); forces Q = L and Q̄ = H when CLR = L, regardless of clock or other inputs. |+| 16 | VCC | power_in | Supply voltage; operating range = 4.5-5.5 V (recommended = 5 V); typical supply current = 12-19 mA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN74F112DR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `sn74f112dr-etched.step` / `sn74f112dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74f112dr.step` / `sn74f112dr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74f112.pdf) (15 pp, sha256 `ae45534e8e63b369`, retrieved 2026-10-01, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74f112dr-datasheet.pdf)
page.jsonadded+204
@@ -0,0 +1,204 @@+{+  "slug": "sn74f112dr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74f112dr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74f112dr.kicad_sym",+    "sn74f112dr.kicad_mod",+    "sn74f112dr.glb",+    "sn74f112dr.step",+    "sn74f112dr.lbr",+    "docs/hero.png",+    "docs/sn74f112dr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74F112DR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74f112.pdf",+    "parts": {+      "symbol": "sn74f112dr.kicad_sym",+      "footprint": "sn74f112dr.kicad_mod",+      "model_3d": "sn74f112dr-etched.glb",+      "model_3d_plain": "sn74f112dr.glb",+      "model_3d_step": "sn74f112dr-etched.step",+      "model_3d_step_plain": "sn74f112dr.step",+      "lbr": "sn74f112dr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2677806",+      "digikey": "296-31763-2-ND",+      "mouser": "595-SN74F112DR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T00:09:03Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-31763-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-SN74F112DR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1CLK",+        "type": "input",+        "description": "Negative-edge-triggered clock input for flip-flop 1; data transfer occurs when CLK makes negative-going transition."+      },+      {+        "number": "2",+        "name": "1K",+        "type": "input",+        "description": "K input for flip-flop 1; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with J controls Q output."+      },+      {+        "number": "3",+        "name": "1J",+        "type": "input",+        "description": "J input for flip-flop 1; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with K controls Q output."+      },+      {+        "number": "4",+        "name": "1PRE",+        "type": "input",+        "description": "Preset input for flip-flop 1 (active low); forces Q = H and Q̄ = L when PRE = L, regardless of clock or other inputs."+      },+      {+        "number": "5",+        "name": "1Q",+        "type": "output",+        "description": "Q output for flip-flop 1; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA)."+      },+      {+        "number": "6",+        "name": "1Q̄",+        "type": "output",+        "description": "Inverted Q output for flip-flop 1; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA); complements 1Q."+      },+      {+        "number": "7",+        "name": "2Q̄",+        "type": "output",+        "description": "Inverted Q output for flip-flop 2; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA); complements 2Q."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; 0 V reference for all logic signals and circuits."+      },+      {+        "number": "9",+        "name": "2Q",+        "type": "output",+        "description": "Q output for flip-flop 2; VOH = 2.5-3.4 V (at IOH = -1 mA), VOL = 0.3-0.5 V (at IOL = 20 mA)."+      },+      {+        "number": "10",+        "name": "2PRE",+        "type": "input",+        "description": "Preset input for flip-flop 2 (active low); forces Q = H and Q̄ = L when PRE = L, regardless of clock or other inputs."+      },+      {+        "number": "11",+        "name": "2J",+        "type": "input",+        "description": "J input for flip-flop 2; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with K controls Q output."+      },+      {+        "number": "12",+        "name": "2K",+        "type": "input",+        "description": "K input for flip-flop 2; setup time = 3-5 ns before CLK↓, hold time = 0 ns; combined with J controls Q output."+      },+      {+        "number": "13",+        "name": "2CLK",+        "type": "input",+        "description": "Negative-edge-triggered clock input for flip-flop 2; data transfer occurs when CLK makes negative-going transition."+      },+      {+        "number": "14",+        "name": "2CLR",+        "type": "input",+        "description": "Clear input for flip-flop 2 (active low); forces Q = L and Q̄ = H when CLR = L, regardless of clock or other inputs."+      },+      {+        "number": "15",+        "name": "1CLR",+        "type": "input",+        "description": "Clear input for flip-flop 1 (active low); forces Q = L and Q̄ = H when CLR = L, regardless of clock or other inputs."+      },+      {+        "number": "16",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage; operating range = 4.5-5.5 V (recommended = 5 V); typical supply current = 12-19 mA."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 15,+        "cost_usd": 0.1092,+        "at": "2026-10-01T00:08:46"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74f112.pdf",+        "pages": 15,+        "sha256": "ae45534e8e63b369",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file