main
Ray
Publish 0.1.0
4b62e34
SN74CBTLV3257PWG4
Texas Instruments · Signal Switches, Multiplexers, Decoders · TSSOP-16
SN74CBTLV3257PWG4 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Select input that sets the channel path: with OE low, S low connects A to B1 and S high connects A to B2. |
| 2 | 1B1 | bidirectional | Channel 1 input/output 1, a FET switch port connected to 1A when S is low and OE is low. |
| 3 | 1B2 | bidirectional | Channel 1 input/output 2, a FET switch port connected to 1A when S is high and OE is low. |
| 4 | 1A | bidirectional | Channel 1 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 5 | 2B1 | bidirectional | Channel 2 input/output 1, a FET switch port connected to 2A when S is low and OE is low. |
| 6 | 2B2 | bidirectional | Channel 2 input/output 2, a FET switch port connected to 2A when S is high and OE is low. |
| 7 | 2A | bidirectional | Channel 2 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 3A | bidirectional | Channel 3 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 10 | 3B2 | bidirectional | Channel 3 input/output 2, a FET switch port connected to 3A when S is high and OE is low. |
| 11 | 3B1 | bidirectional | Channel 3 input/output 1, a FET switch port connected to 3A when S is low and OE is low. |
| 12 | 4A | bidirectional | Channel 4 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 13 | 4B2 | bidirectional | Channel 4 input/output 2, a FET switch port connected to 4A when S is high and OE is low. |
| 14 | 4B1 | bidirectional | Channel 4 input/output 1, a FET switch port connected to 4A when S is low and OE is low. |
| 15 | OE | input | Active-low output enable; when high, all switches are disabled, and it must be pulled up to VCC through a resistor to hold high impedance during power up or down. |
| 16 | VCC | power_in | Supply voltage, recommended operating range 2.3 V to 3.6 V, with a 0.1 µF bypass capacitor recommended close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.5 | 4.6 | V | 5 | ||
| Input voltage (absolute maximum) | VI | -0.5 | 4.6 | V | 5 | ||
| Continuous channel current | 128 | mA | 5 | ||||
| Input clamp current | IIK | -50 | mA | VI/O < 0 | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Supply voltage (recommended) | VCC | 2.3 | 3.6 | V | 6 | ||
| High-level control input voltage | VIH | 1.7 | V | VCC = 2.3V to 2.7V | 6 | ||
| High-level control input voltage | VIH | 2 | V | VCC = 2.7V to 3.6V | 6 | ||
| Low-level control input voltage | VIL | 0.7 | V | VCC = 2.3V to 2.7V | 6 | ||
| Low-level control input voltage | VIL | 0.8 | V | VCC = 2.7V to 3.6V | 6 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | PKG = RGY、DBQ、D、PW、DGV | 6 | |
| Input clamp voltage | VIK | -1.2 | V | VCC = 3V, II = -18 mA | 6 | ||
| Input leakage current | II | -1 | 1 | µA | VCC = 3.6V, VI = VCC or GND | 6 | |
| Power-off leakage current | Ioff | 15 | µA | VCC = 0, VI or VO = 0V to 3.6V | 6 | ||
| Supply current | ICC | 10 | µA | VCC = 3.6V, IO = 0, VI = VCC or GND | 6 | ||
| Additional supply current per control input | ΔICC | 300 | µA | VCC = 3.6V, one input at 3V, other inputs at VCC or GND | 6 | ||
| On-state resistance | ron | 5 | 8 | Ω | VCC = 2.3V (typ at VCC = 2.5V), VI = 0, II = 64 mA | 6 | |
| On-state resistance | ron | 27 | 40 | Ω | VCC = 2.3V (typ at VCC = 2.5V), VI = 1.7V, II = 15 mA | 6 | |
| On-state resistance | ron | 5 | 7 | Ω | VCC = 3V, VI = 0, II = 64 mA | 6 | |
| On-state resistance | ron | 10 | 15 | Ω | VCC = 3V, VI = 2.4V, II = 15 mA | 6 | |
| Control input capacitance | Ci | 3 | pF | VI = 3V or 0V | 6 | ||
| Off-state input/output capacitance, A port | Cio(OFF) | 10.5 | pF | VO = 3V or 0V, OE = VCC | 6 | ||
| Off-state input/output capacitance, B port | Cio(OFF) | 5.5 | pF | VO = 3V or 0V, OE = VCC | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 129.1 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 67 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 87.1 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 14.5 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 86.3 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
SN74CBTLV3257PWG4 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74cbtlv3257pwg4-etched.step/sn74cbtlv3257pwg4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74cbtlv3257pwg4.step/sn74cbtlv3257pwg4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
755a18435f118f44, retrieved 2026-11-10, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74CBTLV3257PWG4
**Texas Instruments** · Signal Switches, Multiplexers, Decoders · TSSOP-16
SN74CBTLV3257PWG4 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Select input that sets the channel path: with OE low, S low connects A to B1 and S high connects A to B2. |
| 2 | 1B1 | bidirectional | Channel 1 input/output 1, a FET switch port connected to 1A when S is low and OE is low. |
| 3 | 1B2 | bidirectional | Channel 1 input/output 2, a FET switch port connected to 1A when S is high and OE is low. |
| 4 | 1A | bidirectional | Channel 1 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 5 | 2B1 | bidirectional | Channel 2 input/output 1, a FET switch port connected to 2A when S is low and OE is low. |
| 6 | 2B2 | bidirectional | Channel 2 input/output 2, a FET switch port connected to 2A when S is high and OE is low. |
| 7 | 2A | bidirectional | Channel 2 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 3A | bidirectional | Channel 3 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 10 | 3B2 | bidirectional | Channel 3 input/output 2, a FET switch port connected to 3A when S is high and OE is low. |
| 11 | 3B1 | bidirectional | Channel 3 input/output 1, a FET switch port connected to 3A when S is low and OE is low. |
| 12 | 4A | bidirectional | Channel 4 common output/input port, with 5 Ω typical on-state switch resistance to the B ports. |
| 13 | 4B2 | bidirectional | Channel 4 input/output 2, a FET switch port connected to 4A when S is high and OE is low. |
| 14 | 4B1 | bidirectional | Channel 4 input/output 1, a FET switch port connected to 4A when S is low and OE is low. |
| 15 | OE | input | Active-low output enable; when high, all switches are disabled, and it must be pulled up to VCC through a resistor to hold high impedance during power up or down. |
| 16 | VCC | power_in | Supply voltage, recommended operating range 2.3 V to 3.6 V, with a 0.1 µF bypass capacitor recommended close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VCC | -0.5 | | 4.6 | V | | 5 |
| Input voltage (absolute maximum) | VI | -0.5 | | 4.6 | V | | 5 |
| Continuous channel current | | | | 128 | mA | | 5 |
| Input clamp current | IIK | -50 | | | mA | VI/O < 0 | 5 |
| Junction temperature | TJ | | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| Supply voltage (recommended) | VCC | 2.3 | | 3.6 | V | | 6 |
| High-level control input voltage | VIH | 1.7 | | | V | VCC = 2.3V to 2.7V | 6 |
| High-level control input voltage | VIH | 2 | | | V | VCC = 2.7V to 3.6V | 6 |
| Low-level control input voltage | VIL | | | 0.7 | V | VCC = 2.3V to 2.7V | 6 |
| Low-level control input voltage | VIL | | | 0.8 | V | VCC = 2.7V to 3.6V | 6 |
| Operating free-air temperature | TA | -40 | | 85 | °C | PKG = RGY、DBQ、D、PW、DGV | 6 |
| Input clamp voltage | VIK | | | -1.2 | V | VCC = 3V, II = -18 mA | 6 |
| Input leakage current | II | -1 | | 1 | µA | VCC = 3.6V, VI = VCC or GND | 6 |
| Power-off leakage current | Ioff | | | 15 | µA | VCC = 0, VI or VO = 0V to 3.6V | 6 |
| Supply current | ICC | | | 10 | µA | VCC = 3.6V, IO = 0, VI = VCC or GND | 6 |
| Additional supply current per control input | ΔICC | | | 300 | µA | VCC = 3.6V, one input at 3V, other inputs at VCC or GND | 6 |
| On-state resistance | ron | | 5 | 8 | Ω | VCC = 2.3V (typ at VCC = 2.5V), VI = 0, II = 64 mA | 6 |
| On-state resistance | ron | | 27 | 40 | Ω | VCC = 2.3V (typ at VCC = 2.5V), VI = 1.7V, II = 15 mA | 6 |
| On-state resistance | ron | | 5 | 7 | Ω | VCC = 3V, VI = 0, II = 64 mA | 6 |
| On-state resistance | ron | | 10 | 15 | Ω | VCC = 3V, VI = 2.4V, II = 15 mA | 6 |
| Control input capacitance | Ci | | 3 | | pF | VI = 3V or 0V | 6 |
| Off-state input/output capacitance, A port | Cio(OFF) | | 10.5 | | pF | VO = 3V or 0V, OE = VCC | 6 |
| Off-state input/output capacitance, B port | Cio(OFF) | | 5.5 | | pF | VO = 3V or 0V, OE = VCC | 6 |
| Junction-to-ambient thermal resistance | RθJA | | 129.1 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 67 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 87.1 | | °C/W | | 5 |
| Junction-to-top characterization parameter | ψJT | | 14.5 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 86.3 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `SN74CBTLV3257PWG4`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `sn74cbtlv3257pwg4-etched.step` / `sn74cbtlv3257pwg4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74cbtlv3257pwg4.step` / `sn74cbtlv3257pwg4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74cbtlv3257) (41 pp, sha256 `755a18435f118f44`, retrieved 2026-11-10, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74cbtlv3257pwg4-datasheet.pdf)