main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sn74cbtlv1g125dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sn74cbtlv1g125dckr: viewers · Ray
package.json sn74cbtlv1g125dckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json sn74cbtlv1g125dckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/sn74cbtlv1g125dckr · Ray
sn74cbtlv1g125dckr-etched.fit.json sn74cbtlv1g125dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74cbtlv1g125dckr-etched.glb sn74cbtlv1g125dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74cbtlv1g125dckr-etched.step sn74cbtlv1g125dckr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sn74cbtlv1g125dckr.glb Publish 0.1.0 · Ray
sn74cbtlv1g125dckr.kicad_mod Publish 0.1.0 · Ray
sn74cbtlv1g125dckr.kicad_sym Publish 0.1.0 · Ray
sn74cbtlv1g125dckr.lbr Publish 0.1.0 · Ray
sn74cbtlv1g125dckr.step Publish 0.1.0 · Ray

SN74CBTLV1G125DCKR

Texas Instruments · Analog Switches, Multiplexers · SC-70-5

SN74CBTLV1G125DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output-enable control input; when low, the FET switch connects A and B with 5-Ω on-state resistance; when high, the switch is disabled and presents high impedance.
2 A bidirectional Data port A of the FET switch; supports rail-to-rail switching from ground to VCC when enabled; input voltage range -0.5 to 4.6 V absolute maximum.
3 GND power_in Ground reference for signal and power circuits.
4 B bidirectional Data port B of the FET switch; connected to A through 5-Ω switch when OE is low; supports rail-to-rail switching from ground to VCC.
5 VCC power_in Positive power supply voltage; recommended operating range 2.3 to 3.6 V, absolute maximum 4.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-5
Category Interface
Pins 5

CAD (KiCad official)

  • Symbol: SN74CBTLV1G125DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: sn74cbtlv1g125dckr-etched.step / sn74cbtlv1g125dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74cbtlv1g125dckr.step / sn74cbtlv1g125dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (15 pp, sha256 63db3971cb1c391b, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF