main
Ray sn74cbtlv1g125dbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) dc8fe2a
{
  "slug": "sn74cbtlv1g125dbvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "sn74cbtlv1g125dbvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74cbtlv1g125dbvr.kicad_sym",
    "sn74cbtlv1g125dbvr.kicad_mod",
    "sn74cbtlv1g125dbvr.glb",
    "sn74cbtlv1g125dbvr.step",
    "sn74cbtlv1g125dbvr.lbr",
    "docs/hero.png",
    "docs/sn74cbtlv1g125dbvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "SN74CBTLV1G125DBVR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Logic",
    "subcategory": "Signal Switches, Multiplexers, Decoders",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74cbtlv1g125.pdf",
    "parts": {
      "symbol": "sn74cbtlv1g125dbvr.kicad_sym",
      "footprint": "sn74cbtlv1g125dbvr.kicad_mod",
      "model_3d": "sn74cbtlv1g125dbvr-etched.glb",
      "model_3d_plain": "sn74cbtlv1g125dbvr.glb",
      "model_3d_step": "sn74cbtlv1g125dbvr-etched.step",
      "model_3d_step_plain": "sn74cbtlv1g125dbvr.step",
      "lbr": "sn74cbtlv1g125dbvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2653264"
    },
    "pins": [
      {
        "number": "1",
        "name": "OE",
        "type": "input",
        "description": "Active-low output-enable control input; when low the A and B switch ports are connected, when high they are disconnected; should be tied to VCC through a pullup resistor to ensure high-impedance state during power up/down."
      },
      {
        "number": "2",
        "name": "A",
        "type": "passive",
        "description": "Bus-switch I/O port A; connects to port B through a 5-Ω FET switch with rail-to-rail switching when OE is low."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground supply pin."
      },
      {
        "number": "4",
        "name": "B",
        "type": "passive",
        "description": "Bus-switch I/O port B; connects to port A through a 5-Ω FET switch with rail-to-rail switching when OE is low."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage pin, recommended operating range 2.3 V to 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package diagram on page 1 uses ASCII art format which may be subject to interpretation; pin assi"
        ],
        "pages_sent": 15,
        "cost_usd": 0.1744,
        "at": "2026-09-24T11:03:46"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn74cbtlv1g125.pdf",
        "pages": 15,
        "sha256": "63db3971cb1c391b",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74cbtlv1g125dbvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74cbtlv1g125dbvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fbc0fd19b81930be42ff3b67fd160bc7856eeac1ad1884215eee56b3ccaa0f9",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}