main
Ray Publish 0.1.0 1e630d9

SN74CBTD3861DBR

Texas Instruments · Signal Switches, Multiplexers, Decoders · SSOP-24-208mil

SN74CBTD3861DBR from Texas Instruments, in a SSOP-24-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection.
2 A1 bidirectional Port A bit 1, connected to B1 through a 5-ohm switch when OE is low and high-impedance when OE is high.
3 A2 bidirectional Port A bit 2, connected to B2 through a 5-ohm switch when OE is low and high-impedance when OE is high.
4 A3 bidirectional Port A bit 3, connected to B3 through a 5-ohm switch when OE is low and high-impedance when OE is high.
5 A4 bidirectional Port A bit 4, connected to B4 through a 5-ohm switch when OE is low and high-impedance when OE is high.
6 A5 bidirectional Port A bit 5, connected to B5 through a 5-ohm switch when OE is low and high-impedance when OE is high.
7 A6 bidirectional Port A bit 6, connected to B6 through a 5-ohm switch when OE is low and high-impedance when OE is high.
8 A7 bidirectional Port A bit 7, connected to B7 through a 5-ohm switch when OE is low and high-impedance when OE is high.
9 A8 bidirectional Port A bit 8, connected to B8 through a 5-ohm switch when OE is low and high-impedance when OE is high.
10 A9 bidirectional Port A bit 9, connected to B9 through a 5-ohm switch when OE is low and high-impedance when OE is high.
11 A10 bidirectional Port A bit 10, connected to B10 through a 5-ohm switch when OE is low and high-impedance when OE is high.
12 GND power_in Ground.
13 B10 bidirectional Port B bit 10, connected to A10 through a 5-ohm switch when OE is low and high-impedance when OE is high.
14 B9 bidirectional Port B bit 9, connected to A9 through a 5-ohm switch when OE is low and high-impedance when OE is high.
15 B8 bidirectional Port B bit 8, connected to A8 through a 5-ohm switch when OE is low and high-impedance when OE is high.
16 B7 bidirectional Port B bit 7, connected to A7 through a 5-ohm switch when OE is low and high-impedance when OE is high.
17 B6 bidirectional Port B bit 6, connected to A6 through a 5-ohm switch when OE is low and high-impedance when OE is high.
18 B5 bidirectional Port B bit 5, connected to A5 through a 5-ohm switch when OE is low and high-impedance when OE is high.
19 B4 bidirectional Port B bit 4, connected to A4 through a 5-ohm switch when OE is low and high-impedance when OE is high.
20 B3 bidirectional Port B bit 3, connected to A3 through a 5-ohm switch when OE is low and high-impedance when OE is high.
21 B2 bidirectional Port B bit 2, connected to A2 through a 5-ohm switch when OE is low and high-impedance when OE is high.
22 B1 bidirectional Port B bit 1, connected to A1 through a 5-ohm switch when OE is low and high-impedance when OE is high.
23 OE input Active-low output enable: low connects port A to port B, high opens the switch (VIH min 2 V, VIL max 0.8 V) and it must be held at VCC or GND when unused.
24 VCC power_in Supply voltage pin (4.5 V to 5.5 V recommended, -0.5 V to 7 V absolute maximum) with an on-die diode to VCC that enables 5-V to 3.3-V level shifting.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-24-208mil
Category Logic
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5.5 V 2
High-level control input voltage VIH 2 V 2
Low-level control input voltage VIL 0.8 V 2
Operating free-air temperature TA -40 85 °C 2
Supply voltage range VCC -0.5 7 V 2
Input voltage range VI -0.5 7 V see Note 1 2
Continuous channel current 128 mA 2
Input clamp current IIK -50 mA VI/O < 0 2
Storage temperature range Tstg -65 150 °C 2
Package thermal impedance DB package θJA 63 °C/W DB package, see Note 2 2
Supply current quiescent ICC 1.5 mA VCC = 5.5 V, IO = 0, VI = VCC or GND 3
Input leakage current II -1 1 µA VCC = 5.5 V, VI = 5.5 V or GND 3
Input clamp voltage VIK -1.2 V VCC = 4.5 V, II = -18 mA 3
Additional supply current per control input ∆ICC 2.5 mA Control inputs VCC = 5.5 V, One input at 3.4 V, Other inputs at VCC or GND 3
Control input capacitance Ci 2.5 pF Control inputs VI = 3 V or 0 3
Off-state input/output capacitance Cio(OFF) 4 pF VO = 3 V or 0, OE = VCC 3
On-state resistance ron 5 7 Ω VCC = 4.5 V, VI = 0, II = 64 mA 3
On-state resistance ron 20 50 Ω VCC = 4.5 V, VI = 2.4 V, II = 15 mA 3
Propagation delay tpd 0.35 ns 3
Enable time ten 2.6 10 ns 3
Disable time tdis 1 6 ns 3

CAD (KiCad official)

  • Symbol: SN74CBTD3861DBR
  • Footprint: Package_SO:SSOP-24_5.3x8.2mm_P0.65mm
  • 3D model: SSOP-24-208mil (KiCad packages3D, STEP)
  • 3D model files: sn74cbtd3861dbr-etched.step / sn74cbtd3861dbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74cbtd3861dbr.step / sn74cbtd3861dbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 65a94b376daf13d4, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF