main
Ray
Publish 0.1.0
de253c6
SN74CBTD1G125DBVR
Texas Instruments · Analog Switches, Multiplexers · SOT-23-5
SN74CBTD1G125DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output-enable control input with TTL-compatible levels (VIH min 2 V, VIL max 0.8 V); the switch connects A to B when low and disconnects when high, and the input must be held at VCC or GND when unused. |
| 2 | A | bidirectional | Switch port A, connected to port B through a 5-ohm switch when OE is low and disconnected when OE is high. |
| 3 | GND | power_in | Ground pin. |
| 4 | B | bidirectional | Switch port B, connected to port A through a 5-ohm switch when OE is low; an on-chip diode to VCC allows level shifting from 5-V signals to 3.3-V signals. |
| 5 | VCC | power_in | Supply voltage pin, recommended operating range 4.5 V to 5.5 V with an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 2 | ||
| Input voltage range | VI | -0.5 | 7 | V | 2 | ||
| Continuous channel current | 128 | mA | 2 | ||||
| Input clamp current | IK | -50 | mA | VI/O < 0 | 2 | ||
| Package thermal impedance DBV package | θJA | 206 | °C/W | DBV package | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 2 | ||
| High-level control input voltage | VIH | 2 | V | 2 | |||
| Low-level control input voltage | VIL | 0.8 | V | 2 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 2 | ||
| Input clamp voltage | VIK | -1.2 | V | VCC = 4.5 V, II = -18 mA | 2 | ||
| Input leakage current | II | -1 | 1 | µA | VCC = 5.5 V, VI = 5.5 V or GND | 2 | |
| Quiescent supply current | ICC | 1.5 | mA | VCC = 5.5 V, IO = 0, VI = VCC or GND | 2 | ||
| Increase in supply current per control input | ΔICC | 2.5 | mA | VCC = 5.5 V, One input at 3.4 V, Other inputs at VCC or GND | 2 | ||
| Control input capacitance | Ci | 2 | pF | VI = 3 V or 0 | 2 | ||
| Off-state input/output capacitance | Cio(OFF) | 3.5 | pF | VO = 3 V or 0, OE = VCC | 2 | ||
| On-state resistance | ron | 5 | 7 | Ω | VCC = 4.5 V, II = 64 mA, VI = 0 | 2 | |
| On-state resistance | ron | 35 | 50 | Ω | VCC = 4.5 V, VI = 2.4 V, II = 15 mA | 2 | |
| Propagation delay | tpd | 0.25 | ns | CL = 50 pF, A or B to B or A | 3 | ||
| Enable time | ten | 2 | 5.9 | ns | CL = 50 pF, OE to A or B | 3 | |
| Disable time | tdis | 1 | 4.7 | ns | CL = 50 pF, OE to A or B | 3 |
CAD (KiCad official)
- Symbol:
SN74CBTD1G125DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sn74cbtd1g125dbvr-etched.step/sn74cbtd1g125dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74cbtd1g125dbvr.step/sn74cbtd1g125dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
2372d278a85fabd5, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74CBTD1G125DBVR
**Texas Instruments** · Analog Switches, Multiplexers · SOT-23-5
SN74CBTD1G125DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-low output-enable control input with TTL-compatible levels (VIH min 2 V, VIL max 0.8 V); the switch connects A to B when low and disconnects when high, and the input must be held at VCC or GND when unused. |
| 2 | A | bidirectional | Switch port A, connected to port B through a 5-ohm switch when OE is low and disconnected when OE is high. |
| 3 | GND | power_in | Ground pin. |
| 4 | B | bidirectional | Switch port B, connected to port A through a 5-ohm switch when OE is low; an on-chip diode to VCC allows level shifting from 5-V signals to 3.3-V signals. |
| 5 | VCC | power_in | Supply voltage pin, recommended operating range 4.5 V to 5.5 V with an absolute maximum of 7 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | | 7 | V | | 2 |
| Input voltage range | VI | -0.5 | | 7 | V | | 2 |
| Continuous channel current | | | | 128 | mA | | 2 |
| Input clamp current | IK | | | -50 | mA | VI/O < 0 | 2 |
| Package thermal impedance DBV package | θJA | | | 206 | °C/W | DBV package | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| Supply voltage | VCC | 4.5 | | 5.5 | V | | 2 |
| High-level control input voltage | VIH | 2 | | | V | | 2 |
| Low-level control input voltage | VIL | | | 0.8 | V | | 2 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 2 |
| Input clamp voltage | VIK | | | -1.2 | V | VCC = 4.5 V, II = -18 mA | 2 |
| Input leakage current | II | -1 | | 1 | µA | VCC = 5.5 V, VI = 5.5 V or GND | 2 |
| Quiescent supply current | ICC | | | 1.5 | mA | VCC = 5.5 V, IO = 0, VI = VCC or GND | 2 |
| Increase in supply current per control input | ΔICC | | | 2.5 | mA | VCC = 5.5 V, One input at 3.4 V, Other inputs at VCC or GND | 2 |
| Control input capacitance | Ci | | 2 | | pF | VI = 3 V or 0 | 2 |
| Off-state input/output capacitance | Cio(OFF) | | 3.5 | | pF | VO = 3 V or 0, OE = VCC | 2 |
| On-state resistance | ron | | 5 | 7 | Ω | VCC = 4.5 V, II = 64 mA, VI = 0 | 2 |
| On-state resistance | ron | | 35 | 50 | Ω | VCC = 4.5 V, VI = 2.4 V, II = 15 mA | 2 |
| Propagation delay | tpd | | | 0.25 | ns | CL = 50 pF, A or B to B or A | 3 |
| Enable time | ten | 2 | | 5.9 | ns | CL = 50 pF, OE to A or B | 3 |
| Disable time | tdis | 1 | | 4.7 | ns | CL = 50 pF, OE to A or B | 3 |
## CAD (KiCad official)
- Symbol: `SN74CBTD1G125DBVR`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `sn74cbtd1g125dbvr-etched.step` / `sn74cbtd1g125dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74cbtd1g125dbvr.step` / `sn74cbtd1g125dbvr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74cbtd1g125.pdf) (16 pp, sha256 `2372d278a85fabd5`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74cbtd1g125dbvr-datasheet.pdf)