component
SN74CBT3253CDBQR
Public Made by Adomby adom
Texas Instruments Signal Switches, Multiplexers, Decoders, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/sn74cbt3253cdbqr
5c3dfdf
SN74CBT3253CDBQR
Texas Instruments · Signal Switches, Multiplexers, Decoders · SSOP-16-150mil
SN74CBT3253CDBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S0 | input | Select address input bit 0 (VIL 0-0.8V, VIH 2-5.5V) that determines the data path in each multiplexer along with S1. |
| 2 | 1A | bidirectional | Multiplexer 1 A-port bidirectional data I/O (0-5.5V) that connects to the B port selected by S0 and S1 when 1OE is low. |
| 3 | 1B3 | bidirectional | Multiplexer 1 B3-port bidirectional data I/O that connects to 1A when S0=L, S1=H, and 1OE=L per function table. |
| 4 | 1B2 | bidirectional | Multiplexer 1 B2-port bidirectional data I/O that connects to 1A when S0=H, S1=L, and 1OE=L per function table. |
| 5 | 2OE | input | Multiplexer 2 active-low output enable control input that enables A-B data connection when low and high-impedance disconnect when high. |
| 6 | 1OE | input | Multiplexer 1 active-low output enable control input that enables A-B data connection when low and high-impedance disconnect when high. |
| 7 | 2B1 | bidirectional | Multiplexer 2 B1-port bidirectional data I/O that connects to 2A when S0=L, S1=L, and 2OE=L per function table. |
| 8 | GND | power_in | Ground (0V reference). |
| 9 | 1B1 | bidirectional | Multiplexer 1 B1-port bidirectional data I/O that connects to 1A when S0=L, S1=L, and 1OE=L per function table. |
| 10 | 1B4 | bidirectional | Multiplexer 1 B4-port bidirectional data I/O that connects to 1A when S0=H, S1=H, and 1OE=L per function table. |
| 11 | 2B2 | bidirectional | Multiplexer 2 B2-port bidirectional data I/O that connects to 2A when S0=H, S1=L, and 2OE=L per function table. |
| 12 | 2B3 | bidirectional | Multiplexer 2 B3-port bidirectional data I/O that connects to 2A when S0=L, S1=H, and 2OE=L per function table. |
| 13 | 2B4 | bidirectional | Multiplexer 2 B4-port bidirectional data I/O that connects to 2A when S0=H, S1=H, and 2OE=L per function table. |
| 14 | 2A | bidirectional | Multiplexer 2 A-port bidirectional data I/O (0-5.5V) that connects to the B port selected by S0 and S1 when 2OE is low. |
| 15 | S1 | input | Select address input bit 1 (VIL 0-0.8V, VIH 2-5.5V) that determines the data path in each multiplexer along with S0. |
| 16 | VCC | power_in | Supply voltage input, 4-5.5V operating range with 3 µA maximum quiescent current per Electrical Characteristics. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Logic |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
SN74CBT3253CDBQR - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
sn74cbt3253cdbqr-etched.step/sn74cbt3253cdbqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74cbt3253cdbqr.step/sn74cbt3253cdbqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
89e75930549ef68c, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74CBT3253CDBQR
**Texas Instruments** · Signal Switches, Multiplexers, Decoders · SSOP-16-150mil
SN74CBT3253CDBQR from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S0 | input | Select address input bit 0 (VIL 0-0.8V, VIH 2-5.5V) that determines the data path in each multiplexer along with S1. |
| 2 | 1A | bidirectional | Multiplexer 1 A-port bidirectional data I/O (0-5.5V) that connects to the B port selected by S0 and S1 when 1OE is low. |
| 3 | 1B3 | bidirectional | Multiplexer 1 B3-port bidirectional data I/O that connects to 1A when S0=L, S1=H, and 1OE=L per function table. |
| 4 | 1B2 | bidirectional | Multiplexer 1 B2-port bidirectional data I/O that connects to 1A when S0=H, S1=L, and 1OE=L per function table. |
| 5 | 2OE | input | Multiplexer 2 active-low output enable control input that enables A-B data connection when low and high-impedance disconnect when high. |
| 6 | 1OE | input | Multiplexer 1 active-low output enable control input that enables A-B data connection when low and high-impedance disconnect when high. |
| 7 | 2B1 | bidirectional | Multiplexer 2 B1-port bidirectional data I/O that connects to 2A when S0=L, S1=L, and 2OE=L per function table. |
| 8 | GND | power_in | Ground (0V reference). |
| 9 | 1B1 | bidirectional | Multiplexer 1 B1-port bidirectional data I/O that connects to 1A when S0=L, S1=L, and 1OE=L per function table. |
| 10 | 1B4 | bidirectional | Multiplexer 1 B4-port bidirectional data I/O that connects to 1A when S0=H, S1=H, and 1OE=L per function table. |
| 11 | 2B2 | bidirectional | Multiplexer 2 B2-port bidirectional data I/O that connects to 2A when S0=H, S1=L, and 2OE=L per function table. |
| 12 | 2B3 | bidirectional | Multiplexer 2 B3-port bidirectional data I/O that connects to 2A when S0=L, S1=H, and 2OE=L per function table. |
| 13 | 2B4 | bidirectional | Multiplexer 2 B4-port bidirectional data I/O that connects to 2A when S0=H, S1=H, and 2OE=L per function table. |
| 14 | 2A | bidirectional | Multiplexer 2 A-port bidirectional data I/O (0-5.5V) that connects to the B port selected by S0 and S1 when 2OE is low. |
| 15 | S1 | input | Select address input bit 1 (VIL 0-0.8V, VIH 2-5.5V) that determines the data path in each multiplexer along with S0. |
| 16 | VCC | power_in | Supply voltage input, 4-5.5V operating range with 3 µA maximum quiescent current per Electrical Characteristics. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Logic |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `SN74CBT3253CDBQR`
- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`
- 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files: `sn74cbt3253cdbqr-etched.step` / `sn74cbt3253cdbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74cbt3253cdbqr.step` / `sn74cbt3253cdbqr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74cbt3253c) (26 pp, sha256 `89e75930549ef68c`, retrieved 2026-09-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74cbt3253cdbqr-datasheet.pdf)