Generated by kicad-footprint-generator · KiCad file format 20260206
SN74CB3T1G125DBVR
Texas Instruments · Analog Switches, Multiplexers · SOT-23-5
SN74CB3T1G125DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output-enable control input: OE low turns the bus switch ON connecting A to B, OE high turns it OFF to a high-impedance state, and OE should be tied to VCC through a pullup resistor to ensure high impedance during power up or down. |
| 2 | A | bidirectional | Switch data port A, with I/O voltage range of 0 V to 5.5 V and 5-V-tolerant operation with device powered up or down. |
| 3 | GND | power_in | Ground reference for all voltages, with continuous current through VCC or GND limited to ±100 mA. |
| 4 | B | bidirectional | Switch data port B, connected to port A when OE is low, with data I/O voltage range of 0 V to 5.5 V and ON-state switch current limited to ±128 mA. |
| 5 | VCC | power_in | Supply voltage input with recommended operating range of 2.3 V to 3.6 V and absolute maximum range of -0.5 V to 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Interface |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 3 | ||
| Control input voltage range | VIN | -0.5 | 7 | V | 3 | ||
| Switch I/O voltage range | VI/O | -0.5 | 7 | V | 3 | ||
| Control input clamp current | IIK | -50 | mA | VIN < 0 | 3 | ||
| I/O port clamp current | II/OK | -50 | mA | VI/O < 0 | 3 | ||
| ON-state switch current | IO | -128 | 128 | mA | 3 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 3 | |||
| Package thermal impedance (DBV package) | θJA | 206 | °C/W | DBV package, per JESD 51-7 | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Supply voltage | VCC | 2.3 | 3.6 | V | 3 | ||
| High-level control input voltage | VIH | 1.7 | 5.5 | V | VCC = 2.3 V to 2.7 V | 3 | |
| High-level control input voltage | VIH | 2 | 5.5 | V | VCC = 2.7 V to 3.6 V | 3 | |
| Low-level control input voltage | VIL | 0 | 0.7 | V | VCC = 2.3 V to 2.7 V | 3 | |
| Low-level control input voltage | VIL | 0 | 0.8 | V | VCC = 2.7 V to 3.6 V | 3 | |
| Data input/output voltage | VI/O | 0 | 5.5 | V | 3 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 3 | ||
| Input clamp voltage | VIK | -1.2 | V | VCC = 3 V, II = -18 mA | 4 | ||
| Control inputs input current | II | -10 | 10 | µA | VCC = 3.6 V, VIN = 3.6 V to 5.5 V or GND | 4 | |
| I/O input current | II | -20 | 20 | µA | VI = VCC, 0.7 V to 5.5 V | 4 | |
| ON-state input current | II | -40 | µA | VI = 0.7 V to VCC, 0.7 V | 4 | ||
| Input current at low data voltage | II | -5 | 5 | µA | VI = 0 to 0.7 V | 4 | |
| Off-state leakage current | IOZ | -10 | 10 | µA | VCC = 3.6 V, VO = 0 to 5.5 V, VI = 0, Switch OFF, VIN = VCC or GND | 4 | |
| Power-off leakage current | Ioff | 10 | µA | VCC = 0, VO = 0 to 5.5 V, VI = 0 | 4 | ||
| Quiescent supply current | ICC | 20 | µA | VI = VCC or GND | 4 | ||
| Increase in supply current per control input | ΔICC | 300 | µA | VCC = 3 V to 3.6 V, One input at VCC, 0.6 V, Other inputs at VCC or GND | 4 | ||
| Control input capacitance | Cin | 3 | pF | VCC = 3.3 V, VIN = VCC or GND | 4 | ||
| Input/output capacitance, switch OFF | Cio(OFF) | 5 | pF | VCC = 3.3 V, VI/O = 5.5 V, 3.3 V, or GND, Switch OFF, VIN = VCC or GND | 4 | ||
| ON-state resistance | ron | 5 | 8 | Ω | VCC = 2.3 V, VI = 0, IO = 24 mA | 4 | |
| ON-state resistance | ron | 5 | 7 | Ω | VCC = 3 V, VI = 0, IO = 64 mA | 4 | |
| Enable time | ten | 1 | 7.5 | ns | VCC = 2.5 V ± 0.2 V, see Figure 2 | 4 | |
| Enable time | ten | 1 | 6.5 | ns | VCC = 3.3 V ± 0.3 V, see Figure 2 | 4 | |
| Disable time | tdis | 1 | 5.5 | ns | VCC = 2.5 V ± 0.2 V, see Figure 2 | 4 | |
| Disable time | tdis | 1 | 6 | ns | VCC = 3.3 V ± 0.3 V, see Figure 2 | 4 |
CAD (KiCad official)
- Symbol:
SN74CB3T1G125DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sn74cb3t1g125dbvr-etched.step/sn74cb3t1g125dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74cb3t1g125dbvr.step/sn74cb3t1g125dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (18 pp, sha256
c85b9867c881127e, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).