main
Ray
Publish 0.1.0
8b45d2d
SN74CB3T16210DGGR
Texas Instruments · Integrated Circuits (ICs) · 48-TFSOP (0.240", 6.10mm Width)
SN74CB3T16210DGGR from Texas Instruments, in a 48-TFSOP (0.240", 6.10mm Width). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | 1A1 | bidirectional | Port A bit 1 of the first 10-bit bus switch, connected to 1B1 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 3 | 1A2 | bidirectional | Port A bit 2 of the first 10-bit bus switch, connected to 1B2 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 4 | 1A3 | bidirectional | Port A bit 3 of the first 10-bit bus switch, connected to 1B3 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 5 | 1A4 | bidirectional | Port A bit 4 of the first 10-bit bus switch, connected to 1B4 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 6 | 1A5 | bidirectional | Port A bit 5 of the first 10-bit bus switch, connected to 1B5 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 7 | 1A6 | bidirectional | Port A bit 6 of the first 10-bit bus switch, connected to 1B6 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 8 | GND | power_in | Ground. |
| 9 | 1A7 | bidirectional | Port A bit 7 of the first 10-bit bus switch, connected to 1B7 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 10 | 1A8 | bidirectional | Port A bit 8 of the first 10-bit bus switch, connected to 1B8 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 11 | 1A9 | bidirectional | Port A bit 9 of the first 10-bit bus switch, connected to 1B9 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 12 | 1A10 | bidirectional | Port A bit 10 of the first 10-bit bus switch, connected to 1B10 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 13 | 2A1 | bidirectional | Port A bit 1 of the second 10-bit bus switch, connected to 2B1 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 14 | 2A2 | bidirectional | Port A bit 2 of the second 10-bit bus switch, connected to 2B2 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 15 | VCC | power_in | Supply voltage, operating range 2.3 V to 3.6 V. |
| 16 | 2A3 | bidirectional | Port A bit 3 of the second 10-bit bus switch, connected to 2B3 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 17 | GND | power_in | Ground. |
| 18 | 2A4 | bidirectional | Port A bit 4 of the second 10-bit bus switch, connected to 2B4 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 19 | 2A5 | bidirectional | Port A bit 5 of the second 10-bit bus switch, connected to 2B5 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 20 | 2A6 | bidirectional | Port A bit 6 of the second 10-bit bus switch, connected to 2B6 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 21 | 2A7 | bidirectional | Port A bit 7 of the second 10-bit bus switch, connected to 2B7 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 22 | 2A8 | bidirectional | Port A bit 8 of the second 10-bit bus switch, connected to 2B8 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 23 | 2A9 | bidirectional | Port A bit 9 of the second 10-bit bus switch, connected to 2B9 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 24 | 2A10 | bidirectional | Port A bit 10 of the second 10-bit bus switch, connected to 2B10 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 25 | 2B10 | bidirectional | Port B bit 10 of the second 10-bit bus switch, connected to 2A10 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 26 | 2B9 | bidirectional | Port B bit 9 of the second 10-bit bus switch, connected to 2A9 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 27 | 2B8 | bidirectional | Port B bit 8 of the second 10-bit bus switch, connected to 2A8 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 28 | 2B7 | bidirectional | Port B bit 7 of the second 10-bit bus switch, connected to 2A7 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 29 | 2B6 | bidirectional | Port B bit 6 of the second 10-bit bus switch, connected to 2A6 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 30 | 2B5 | bidirectional | Port B bit 5 of the second 10-bit bus switch, connected to 2A5 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 31 | 2B4 | bidirectional | Port B bit 4 of the second 10-bit bus switch, connected to 2A4 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 32 | GND | power_in | Ground. |
| 33 | 2B3 | bidirectional | Port B bit 3 of the second 10-bit bus switch, connected to 2A3 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 34 | 2B2 | bidirectional | Port B bit 2 of the second 10-bit bus switch, connected to 2A2 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 35 | 2B1 | bidirectional | Port B bit 1 of the second 10-bit bus switch, connected to 2A1 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 36 | 1B10 | bidirectional | Port B bit 10 of the first 10-bit bus switch, connected to 1A10 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 37 | 1B9 | bidirectional | Port B bit 9 of the first 10-bit bus switch, connected to 1A9 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 38 | 1B8 | bidirectional | Port B bit 8 of the first 10-bit bus switch, connected to 1A8 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 39 | 1B7 | bidirectional | Port B bit 7 of the first 10-bit bus switch, connected to 1A7 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 40 | 1B6 | bidirectional | Port B bit 6 of the first 10-bit bus switch, connected to 1A6 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 41 | GND | power_in | Ground. |
| 42 | 1B5 | bidirectional | Port B bit 5 of the first 10-bit bus switch, connected to 1A5 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 43 | 1B4 | bidirectional | Port B bit 4 of the first 10-bit bus switch, connected to 1A4 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 44 | 1B3 | bidirectional | Port B bit 3 of the first 10-bit bus switch, connected to 1A3 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 45 | 1B2 | bidirectional | Port B bit 2 of the first 10-bit bus switch, connected to 1A2 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 46 | 1B1 | bidirectional | Port B bit 1 of the first 10-bit bus switch, connected to 1A1 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 47 | 2OE | input | Active-low output enable for the second 10-bit bus switch (switch ON when low, OFF when high), with VIH of 2 V to 5.5 V at VCC 2.7 V to 3.6 V and tied to VCC through a pullup resistor to ensure high-impedance during power up or power down. |
| 48 | 1OE | input | Active-low output enable for the first 10-bit bus switch (switch ON when low, OFF when high), with VIH of 2 V to 5.5 V at VCC 2.7 V to 3.6 V and tied to VCC through a pullup resistor to ensure high-impedance during power up or power down. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 48-TFSOP (0.240", 6.10mm Width) |
| Category | Integrated Circuits (ICs) |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.3 | 3.6 | V | 5 | ||
| High-level control input voltage | VIH | 1.7 | 5.5 | V | VCC = 2.3 V to 2.7 V | 5 | |
| High-level control input voltage | VIH | 2 | 5.5 | V | VCC = 2.7 V to 3.6 V | 5 | |
| Low-level control input voltage | VIL | 0 | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 | |
| Low-level control input voltage | VIL | 0 | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 | |
| Data input/output voltage | VI/O | 0 | 5.5 | V | 5 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 5 | ||
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Control input voltage range | VIN | -0.5 | 7 | V | 4 | ||
| Switch I/O voltage range | VI/O | -0.5 | 7 | V | 4 | ||
| Control input clamp current | IIK | -50 | mA | VIN < 0 | 4 | ||
| I/O port clamp current | II/OK | -50 | mA | VI/O < 0 | 4 | ||
| ON-state switch current | IIO | -128 | 128 | mA | 4 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Package thermal impedance, DGG package | θJA | 70 | °C/W | DGG package | 4 | ||
| Control input clamp voltage | VIK | -1.2 | V | VCC = 3 V, II = -18 mA | 5 | ||
| Control input leakage current | IIN | -10 | 10 | μA | VCC = 3.6 V, VIN = 3.6 V to 5.5 V or GND | 5 | |
| Off-state leakage current | IOZ | -10 | 10 | μA | VCC = 3.6 V, VO = 0 to 5.5 V, VI = 0, Switch OFF, VIN = VCC or GND | 5 | |
| On-state leakage current | II | -20 | 20 | μA | VCC = 3.6 V, Switch ON, VI = VCC, 0.7 V to 5.5 V, VIN = VCC or GND | 5 | |
| On-state leakage current | II | 5 | μA | VCC = 3.6 V, Switch ON, VI = 0 to 0.7 V, VIN = VCC or GND | 5 | ||
| Partial power down leakage current | Ioff | 10 | μA | VCC = 0, VO = 0 to 5.5 V, VI = 0 | 5 | ||
| Quiescent supply current | ICC | 40 | μA | VCC = 3.6 V, II/O = 0, Switch ON or OFF, VIN = VCC or GND, VI = VCC or GND | 5 | ||
| Increase in supply current per control input | ΔICC | 300 | μA | VCC = 3 V to 3.6 V, one input at VCC, 0.6 V, other inputs at VCC or GND | 5 | ||
| Control input capacitance | Cin | 4 | pF | VCC = 3.3 V, VIN = VCC or GND | 5 | ||
| Input/output capacitance, switch OFF | Cio(OFF) | 5 | pF | VCC = 3.3 V, VI/O = 5.5 V, 3.3 V, or GND, Switch OFF, VIN = VCC or GND | 5 | ||
| Input/output capacitance, switch ON | Cio(ON) | 13 | pF | VCC = 3.3 V, Switch ON, VIN = VCC or GND, VI/O = GND | 5 | ||
| ON-state resistance | ron | 5 | 9.5 | Ω | VCC = 2.3 V, VI = 0, IO = 24 mA | 5 | |
| ON-state resistance | ron | 5 | 8.5 | Ω | VCC = 3 V, VI = 0, IO = 64 mA | 5 | |
| Enable time OE to A or B | ten | 1 | 12 | ns | VCC = 2.5 V ± 0.2 V (see Figure 2) | 6 | |
| Enable time OE to A or B | ten | 1 | 10 | ns | VCC = 3.3 V ± 0.3 V (see Figure 2) | 6 | |
| Disable time OE to A or B | tdis | 1 | 7.5 | ns | VCC = 2.5 V ± 0.2 V (see Figure 2) | 6 | |
| Disable time OE to A or B | tdis | 1 | 8.5 | ns | VCC = 3.3 V ± 0.3 V (see Figure 2) | 6 |
CAD (Adom-generated)
- Symbol:
SN74CB3T16210DGGR - Footprint:
Adom_Gen:Texas_Instruments_SN74_c404a0 - 3D model: generated to fit the land (STEP)
- 3D model files:
sn74cb3t16210dggr-etched.step/sn74cb3t16210dggr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74cb3t16210dggr.step/sn74cb3t16210dggr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
820f98202ee3a8d1, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# SN74CB3T16210DGGR
**Texas Instruments** · Integrated Circuits (ICs) · 48-TFSOP (0.240", 6.10mm Width)
SN74CB3T16210DGGR from Texas Instruments, in a 48-TFSOP (0.240", 6.10mm Width). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | 1A1 | bidirectional | Port A bit 1 of the first 10-bit bus switch, connected to 1B1 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 3 | 1A2 | bidirectional | Port A bit 2 of the first 10-bit bus switch, connected to 1B2 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 4 | 1A3 | bidirectional | Port A bit 3 of the first 10-bit bus switch, connected to 1B3 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 5 | 1A4 | bidirectional | Port A bit 4 of the first 10-bit bus switch, connected to 1B4 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 6 | 1A5 | bidirectional | Port A bit 5 of the first 10-bit bus switch, connected to 1B5 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 7 | 1A6 | bidirectional | Port A bit 6 of the first 10-bit bus switch, connected to 1B6 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 8 | GND | power_in | Ground. |
| 9 | 1A7 | bidirectional | Port A bit 7 of the first 10-bit bus switch, connected to 1B7 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 10 | 1A8 | bidirectional | Port A bit 8 of the first 10-bit bus switch, connected to 1B8 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 11 | 1A9 | bidirectional | Port A bit 9 of the first 10-bit bus switch, connected to 1B9 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 12 | 1A10 | bidirectional | Port A bit 10 of the first 10-bit bus switch, connected to 1B10 when 1OE is low and high-impedance when 1OE is high; data I/O accepts 0 to 5.5 V. |
| 13 | 2A1 | bidirectional | Port A bit 1 of the second 10-bit bus switch, connected to 2B1 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 14 | 2A2 | bidirectional | Port A bit 2 of the second 10-bit bus switch, connected to 2B2 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 15 | VCC | power_in | Supply voltage, operating range 2.3 V to 3.6 V. |
| 16 | 2A3 | bidirectional | Port A bit 3 of the second 10-bit bus switch, connected to 2B3 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 17 | GND | power_in | Ground. |
| 18 | 2A4 | bidirectional | Port A bit 4 of the second 10-bit bus switch, connected to 2B4 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 19 | 2A5 | bidirectional | Port A bit 5 of the second 10-bit bus switch, connected to 2B5 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 20 | 2A6 | bidirectional | Port A bit 6 of the second 10-bit bus switch, connected to 2B6 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 21 | 2A7 | bidirectional | Port A bit 7 of the second 10-bit bus switch, connected to 2B7 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 22 | 2A8 | bidirectional | Port A bit 8 of the second 10-bit bus switch, connected to 2B8 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 23 | 2A9 | bidirectional | Port A bit 9 of the second 10-bit bus switch, connected to 2B9 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 24 | 2A10 | bidirectional | Port A bit 10 of the second 10-bit bus switch, connected to 2B10 when 2OE is low and high-impedance when 2OE is high; data I/O accepts 0 to 5.5 V. |
| 25 | 2B10 | bidirectional | Port B bit 10 of the second 10-bit bus switch, connected to 2A10 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 26 | 2B9 | bidirectional | Port B bit 9 of the second 10-bit bus switch, connected to 2A9 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 27 | 2B8 | bidirectional | Port B bit 8 of the second 10-bit bus switch, connected to 2A8 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 28 | 2B7 | bidirectional | Port B bit 7 of the second 10-bit bus switch, connected to 2A7 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 29 | 2B6 | bidirectional | Port B bit 6 of the second 10-bit bus switch, connected to 2A6 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 30 | 2B5 | bidirectional | Port B bit 5 of the second 10-bit bus switch, connected to 2A5 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 31 | 2B4 | bidirectional | Port B bit 4 of the second 10-bit bus switch, connected to 2A4 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 32 | GND | power_in | Ground. |
| 33 | 2B3 | bidirectional | Port B bit 3 of the second 10-bit bus switch, connected to 2A3 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 34 | 2B2 | bidirectional | Port B bit 2 of the second 10-bit bus switch, connected to 2A2 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 35 | 2B1 | bidirectional | Port B bit 1 of the second 10-bit bus switch, connected to 2A1 when 2OE is low; data I/O accepts 0 to 5.5 V. |
| 36 | 1B10 | bidirectional | Port B bit 10 of the first 10-bit bus switch, connected to 1A10 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 37 | 1B9 | bidirectional | Port B bit 9 of the first 10-bit bus switch, connected to 1A9 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 38 | 1B8 | bidirectional | Port B bit 8 of the first 10-bit bus switch, connected to 1A8 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 39 | 1B7 | bidirectional | Port B bit 7 of the first 10-bit bus switch, connected to 1A7 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 40 | 1B6 | bidirectional | Port B bit 6 of the first 10-bit bus switch, connected to 1A6 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 41 | GND | power_in | Ground. |
| 42 | 1B5 | bidirectional | Port B bit 5 of the first 10-bit bus switch, connected to 1A5 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 43 | 1B4 | bidirectional | Port B bit 4 of the first 10-bit bus switch, connected to 1A4 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 44 | 1B3 | bidirectional | Port B bit 3 of the first 10-bit bus switch, connected to 1A3 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 45 | 1B2 | bidirectional | Port B bit 2 of the first 10-bit bus switch, connected to 1A2 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 46 | 1B1 | bidirectional | Port B bit 1 of the first 10-bit bus switch, connected to 1A1 when 1OE is low; data I/O accepts 0 to 5.5 V. |
| 47 | 2OE | input | Active-low output enable for the second 10-bit bus switch (switch ON when low, OFF when high), with VIH of 2 V to 5.5 V at VCC 2.7 V to 3.6 V and tied to VCC through a pullup resistor to ensure high-impedance during power up or power down. |
| 48 | 1OE | input | Active-low output enable for the first 10-bit bus switch (switch ON when low, OFF when high), with VIH of 2 V to 5.5 V at VCC 2.7 V to 3.6 V and tied to VCC through a pullup resistor to ensure high-impedance during power up or power down. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 48-TFSOP (0.240", 6.10mm Width) |
| Category | Integrated Circuits (ICs) |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.3 | | 3.6 | V | | 5 |
| High-level control input voltage | VIH | 1.7 | | 5.5 | V | VCC = 2.3 V to 2.7 V | 5 |
| High-level control input voltage | VIH | 2 | | 5.5 | V | VCC = 2.7 V to 3.6 V | 5 |
| Low-level control input voltage | VIL | 0 | | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 |
| Low-level control input voltage | VIL | 0 | | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 |
| Data input/output voltage | VI/O | 0 | | 5.5 | V | | 5 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 5 |
| Supply voltage range | VCC | -0.5 | | 7 | V | | 4 |
| Control input voltage range | VIN | -0.5 | | 7 | V | | 4 |
| Switch I/O voltage range | VI/O | -0.5 | | 7 | V | | 4 |
| Control input clamp current | IIK | | | -50 | mA | VIN < 0 | 4 |
| I/O port clamp current | II/OK | | | -50 | mA | VI/O < 0 | 4 |
| ON-state switch current | IIO | -128 | | 128 | mA | | 4 |
| Continuous current through VCC or GND | | -100 | | 100 | mA | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Package thermal impedance, DGG package | θJA | | 70 | | °C/W | DGG package | 4 |
| Control input clamp voltage | VIK | | | -1.2 | V | VCC = 3 V, II = -18 mA | 5 |
| Control input leakage current | IIN | -10 | | 10 | μA | VCC = 3.6 V, VIN = 3.6 V to 5.5 V or GND | 5 |
| Off-state leakage current | IOZ | -10 | | 10 | μA | VCC = 3.6 V, VO = 0 to 5.5 V, VI = 0, Switch OFF, VIN = VCC or GND | 5 |
| On-state leakage current | II | -20 | | 20 | μA | VCC = 3.6 V, Switch ON, VI = VCC, 0.7 V to 5.5 V, VIN = VCC or GND | 5 |
| On-state leakage current | II | | | 5 | μA | VCC = 3.6 V, Switch ON, VI = 0 to 0.7 V, VIN = VCC or GND | 5 |
| Partial power down leakage current | Ioff | | | 10 | μA | VCC = 0, VO = 0 to 5.5 V, VI = 0 | 5 |
| Quiescent supply current | ICC | | | 40 | μA | VCC = 3.6 V, II/O = 0, Switch ON or OFF, VIN = VCC or GND, VI = VCC or GND | 5 |
| Increase in supply current per control input | ΔICC | | | 300 | μA | VCC = 3 V to 3.6 V, one input at VCC, 0.6 V, other inputs at VCC or GND | 5 |
| Control input capacitance | Cin | | 4 | | pF | VCC = 3.3 V, VIN = VCC or GND | 5 |
| Input/output capacitance, switch OFF | Cio(OFF) | | 5 | | pF | VCC = 3.3 V, VI/O = 5.5 V, 3.3 V, or GND, Switch OFF, VIN = VCC or GND | 5 |
| Input/output capacitance, switch ON | Cio(ON) | | 13 | | pF | VCC = 3.3 V, Switch ON, VIN = VCC or GND, VI/O = GND | 5 |
| ON-state resistance | ron | | 5 | 9.5 | Ω | VCC = 2.3 V, VI = 0, IO = 24 mA | 5 |
| ON-state resistance | ron | | 5 | 8.5 | Ω | VCC = 3 V, VI = 0, IO = 64 mA | 5 |
| Enable time OE to A or B | ten | 1 | | 12 | ns | VCC = 2.5 V ± 0.2 V (see Figure 2) | 6 |
| Enable time OE to A or B | ten | 1 | | 10 | ns | VCC = 3.3 V ± 0.3 V (see Figure 2) | 6 |
| Disable time OE to A or B | tdis | 1 | | 7.5 | ns | VCC = 2.5 V ± 0.2 V (see Figure 2) | 6 |
| Disable time OE to A or B | tdis | 1 | | 8.5 | ns | VCC = 3.3 V ± 0.3 V (see Figure 2) | 6 |
## CAD (Adom-generated)
- Symbol: `SN74CB3T16210DGGR`
- Footprint: `Adom_Gen:Texas_Instruments_SN74_c404a0`
- 3D model: generated to fit the land (STEP)
- 3D model files: `sn74cb3t16210dggr-etched.step` / `sn74cb3t16210dggr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74cb3t16210dggr.step` / `sn74cb3t16210dggr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74cb3t16210.pdf) (20 pp, sha256 `820f98202ee3a8d1`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/sn74cb3t16210dggr-datasheet.pdf)