main
Ray
Publish 0.1.0
82ea5b6
SN74CB3Q16210DGGR
Texas Instruments · Integrated Circuits (ICs) · 48-TFSOP (0.240", 6.10mm Width)
SN74CB3Q16210DGGR from Texas Instruments, in a 48-TFSOP (0.240", 6.10mm Width). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | 1A1 | bidirectional | Data I/O 1A1 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 3 | 1A2 | bidirectional | Data I/O 1A2 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 4 | 1A3 | bidirectional | Data I/O 1A3 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 5 | 1A4 | bidirectional | Data I/O 1A4 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 6 | 1A5 | bidirectional | Data I/O 1A5 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 7 | 1A6 | bidirectional | Data I/O 1A6 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 8 | GND | power_in | Ground terminal. |
| 9 | 1A7 | bidirectional | Data I/O 1A7 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 10 | 1A8 | bidirectional | Data I/O 1A8 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 11 | 1A9 | bidirectional | Data I/O 1A9 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 12 | 1A10 | bidirectional | Data I/O 1A10 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 13 | 2A1 | bidirectional | Data I/O 2A1 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 14 | 2A2 | bidirectional | Data I/O 2A2 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 15 | VCC | power_in | Supply voltage, recommended operating range 2.3 V to 3.6 V. |
| 16 | 2A3 | bidirectional | Data I/O 2A3 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 17 | GND | power_in | Ground terminal. |
| 18 | 2A4 | bidirectional | Data I/O 2A4 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 19 | 2A5 | bidirectional | Data I/O 2A5 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 20 | 2A6 | bidirectional | Data I/O 2A6 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 21 | 2A7 | bidirectional | Data I/O 2A7 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 22 | 2A8 | bidirectional | Data I/O 2A8 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 23 | 2A9 | bidirectional | Data I/O 2A9 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 24 | 2A10 | bidirectional | Data I/O 2A10 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 25 | 2B10 | bidirectional | Data I/O 2B10 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 26 | 2B9 | bidirectional | Data I/O 2B9 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 27 | 2B8 | bidirectional | Data I/O 2B8 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 28 | 2B7 | bidirectional | Data I/O 2B7 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 29 | 2B6 | bidirectional | Data I/O 2B6 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 30 | 2B5 | bidirectional | Data I/O 2B5 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 31 | 2B4 | bidirectional | Data I/O 2B4 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 32 | GND | power_in | Ground terminal. |
| 33 | 2B3 | bidirectional | Data I/O 2B3 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 34 | 2B2 | bidirectional | Data I/O 2B2 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 35 | 2B1 | bidirectional | Data I/O 2B1 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 36 | 1B10 | bidirectional | Data I/O 1B10 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 37 | 1B9 | bidirectional | Data I/O 1B9 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 38 | 1B8 | bidirectional | Data I/O 1B8 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 39 | 1B7 | bidirectional | Data I/O 1B7 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 40 | 1B6 | bidirectional | Data I/O 1B6 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 41 | GND | power_in | Ground terminal. |
| 42 | 1B5 | bidirectional | Data I/O 1B5 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 43 | 1B4 | bidirectional | Data I/O 1B4 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 44 | 1B3 | bidirectional | Data I/O 1B3 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 45 | 1B2 | bidirectional | Data I/O 1B2 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 46 | 1B1 | bidirectional | Data I/O 1B1 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 47 | 2OE | input | Output enable for the second 10-bit bus switch; low turns the switch ON and high sets A and B to high impedance, and it should be tied to VCC through a pullup resistor. |
| 48 | 1OE | input | Output enable for the first 10-bit bus switch; low turns the switch ON and high sets A and B to high impedance, and it should be tied to VCC through a pullup resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 48-TFSOP (0.240", 6.10mm Width) |
| Category | Integrated Circuits (ICs) |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 4.6 | V | 4 | ||
| Control input voltage range | VIN | -0.5 | 7 | V | 4 | ||
| Switch I/O voltage range | VI/O | -0.5 | 7 | V | 4 | ||
| Control input clamp current | IIK | -50 | mA | VIN < 0 | 4 | ||
| I/O port clamp current | II/OK | -50 | mA | VI/O < 0 | 4 | ||
| ON-state switch current | II/O | -64 | 64 | mA | see Note 4 | 4 | |
| Continuous current through VCC or GND terminals | -100 | 100 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 2.3 | 3.6 | V | 4 | ||
| High-level control input voltage | VIH | 1.7 | 5.5 | V | VCC = 2.3 V to 2.7 V | 4 | |
| High-level control input voltage | VIH | 2 | 5.5 | V | VCC = 2.7 V to 3.6 V | 4 | |
| Low-level control input voltage | VIL | 0 | 0.7 | V | VCC = 2.3 V to 2.7 V | 4 | |
| Low-level control input voltage | VIL | 0 | 0.8 | V | VCC = 2.7 V to 3.6 V | 4 | |
| Data input/output voltage | VI/O | 0 | 5.5 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Input clamp voltage | VIK | -1.8 | V | VCC = 3.6 V, II = −18 mA | 5 | ||
| Control input leakage current | IIN | -1 | 1 | µA | VCC = 3.6 V, VIN = 0 to 5.5 V | 5 | |
| Off-state I/O leakage current | IOZ | -1 | 1 | µA | VCC = 3.6 V, VO = 0 to 5.5 V, VI = 0, Switch OFF, VIN = VCC or GND | 5 | |
| Partial-power-down leakage current | Ioff | 1 | µA | VCC = 0, VO = 0 to 5.5 V, VI = 0 | 5 | ||
| Supply current | ICC | 1 | 3 | mA | VCC = 3.6 V, II/O = 0, Switch ON or OFF, VIN = VCC or GND | 5 | |
| Increase in supply current per control input at TTL level | ΔICC | 30 | µA | VCC = 3.6 V, One input at 3 V, Other inputs at VCC or GND | 5 | ||
| Dynamic power-supply current per control input | ICCD | 0.15 | 0.25 | mA/MHz | VCC = 3.6 V, A and B ports open, Control input switching at 50% duty cycle | 5 | |
| Control input capacitance | Cin | 3.5 | 5 | pF | VCC = 3.3 V, VIN = 5.5 V, 3.3 V, or 0 | 5 | |
| Input/output capacitance, switch OFF | Cio(OFF) | 4 | 5 | pF | VCC = 3.3 V, Switch OFF, VIN = VCC or GND, VI/O = 5.5 V, 3.3 V, or 0 | 5 | |
| Input/output capacitance, switch ON | Cio(ON) | 10 | 12.5 | pF | VCC = 3.3 V, Switch ON, VIN = VCC or GND, VI/O = 5.5 V, 3.3 V, or 0 | 5 | |
| ON-state resistance | ron | 5 | 8 | Ω | VCC = 2.3 V, VI = 0, IO = 30 mA | 5 | |
| ON-state resistance | ron | 5 | 9 | Ω | VCC = 2.3 V, VI = 1.7 V, IO = −15 mA | 5 | |
| ON-state resistance | ron | 5 | 7 | Ω | VCC = 3 V, VI = 0, IO = 30 mA | 5 | |
| Maximum switching frequency for control input | fOE | 20 | MHz | VO > VCC, VI = 5 V, RL ≥ 1 MΩ, CL = 0 | 5 | ||
| Propagation delay | tpd | 0.25 | ns | A or B to B or A | 5 | ||
| Enable time | ten | 1.5 | 9 | ns | VCC = 2.5 V ± 0.2 V | 5 | |
| Enable time | ten | 1.5 | 8 | ns | VCC = 3.3 V ± 0.3 V | 5 | |
| Disable time | tdis | 1 | 8 | ns | VCC = 2.5 V ± 0.2 V | 5 | |
| Disable time | tdis | 1 | 7 | ns | VCC = 3.3 V ± 0.3 V | 5 | |
| Package thermal impedance, DGG package | θJA | 70 | °C/W | DGG package, JESD 51-7 (Note 5) | 4 |
CAD (Adom-generated)
- Symbol:
SN74CB3Q16210DGGR - Footprint:
Adom_Gen:Texas_Instruments_SN74_c404a0 - 3D model: generated to fit the land (STEP)
- 3D model files:
sn74cb3q16210dggr-etched.step/sn74cb3q16210dggr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74cb3q16210dggr.step/sn74cb3q16210dggr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
e4486890b92c685b, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# SN74CB3Q16210DGGR
**Texas Instruments** · Integrated Circuits (ICs) · 48-TFSOP (0.240", 6.10mm Width)
SN74CB3Q16210DGGR from Texas Instruments, in a 48-TFSOP (0.240", 6.10mm Width). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | 1A1 | bidirectional | Data I/O 1A1 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 3 | 1A2 | bidirectional | Data I/O 1A2 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 4 | 1A3 | bidirectional | Data I/O 1A3 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 5 | 1A4 | bidirectional | Data I/O 1A4 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 6 | 1A5 | bidirectional | Data I/O 1A5 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 7 | 1A6 | bidirectional | Data I/O 1A6 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 8 | GND | power_in | Ground terminal. |
| 9 | 1A7 | bidirectional | Data I/O 1A7 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 10 | 1A8 | bidirectional | Data I/O 1A8 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 11 | 1A9 | bidirectional | Data I/O 1A9 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 12 | 1A10 | bidirectional | Data I/O 1A10 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 13 | 2A1 | bidirectional | Data I/O 2A1 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 14 | 2A2 | bidirectional | Data I/O 2A2 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 15 | VCC | power_in | Supply voltage, recommended operating range 2.3 V to 3.6 V. |
| 16 | 2A3 | bidirectional | Data I/O 2A3 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 17 | GND | power_in | Ground terminal. |
| 18 | 2A4 | bidirectional | Data I/O 2A4 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 19 | 2A5 | bidirectional | Data I/O 2A5 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 20 | 2A6 | bidirectional | Data I/O 2A6 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 21 | 2A7 | bidirectional | Data I/O 2A7 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 22 | 2A8 | bidirectional | Data I/O 2A8 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 23 | 2A9 | bidirectional | Data I/O 2A9 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 24 | 2A10 | bidirectional | Data I/O 2A10 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 25 | 2B10 | bidirectional | Data I/O 2B10 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 26 | 2B9 | bidirectional | Data I/O 2B9 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 27 | 2B8 | bidirectional | Data I/O 2B8 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 28 | 2B7 | bidirectional | Data I/O 2B7 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 29 | 2B6 | bidirectional | Data I/O 2B6 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 30 | 2B5 | bidirectional | Data I/O 2B5 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 31 | 2B4 | bidirectional | Data I/O 2B4 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 32 | GND | power_in | Ground terminal. |
| 33 | 2B3 | bidirectional | Data I/O 2B3 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 34 | 2B2 | bidirectional | Data I/O 2B2 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 35 | 2B1 | bidirectional | Data I/O 2B1 of the second 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 36 | 1B10 | bidirectional | Data I/O 1B10 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 37 | 1B9 | bidirectional | Data I/O 1B9 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 38 | 1B8 | bidirectional | Data I/O 1B8 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 39 | 1B7 | bidirectional | Data I/O 1B7 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 40 | 1B6 | bidirectional | Data I/O 1B6 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 41 | GND | power_in | Ground terminal. |
| 42 | 1B5 | bidirectional | Data I/O 1B5 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 43 | 1B4 | bidirectional | Data I/O 1B4 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 44 | 1B3 | bidirectional | Data I/O 1B3 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 45 | 1B2 | bidirectional | Data I/O 1B2 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 46 | 1B1 | bidirectional | Data I/O 1B1 of the first 10-bit bus switch, with a switch I/O voltage range of 0 V to 5.5 V. |
| 47 | 2OE | input | Output enable for the second 10-bit bus switch; low turns the switch ON and high sets A and B to high impedance, and it should be tied to VCC through a pullup resistor. |
| 48 | 1OE | input | Output enable for the first 10-bit bus switch; low turns the switch ON and high sets A and B to high impedance, and it should be tied to VCC through a pullup resistor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 48-TFSOP (0.240", 6.10mm Width) |
| Category | Integrated Circuits (ICs) |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 4.6 | V | | 4 |
| Control input voltage range | VIN | -0.5 | | 7 | V | | 4 |
| Switch I/O voltage range | VI/O | -0.5 | | 7 | V | | 4 |
| Control input clamp current | IIK | -50 | | | mA | VIN < 0 | 4 |
| I/O port clamp current | II/OK | -50 | | | mA | VI/O < 0 | 4 |
| ON-state switch current | II/O | -64 | | 64 | mA | see Note 4 | 4 |
| Continuous current through VCC or GND terminals | | -100 | | 100 | mA | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | VCC | 2.3 | | 3.6 | V | | 4 |
| High-level control input voltage | VIH | 1.7 | | 5.5 | V | VCC = 2.3 V to 2.7 V | 4 |
| High-level control input voltage | VIH | 2 | | 5.5 | V | VCC = 2.7 V to 3.6 V | 4 |
| Low-level control input voltage | VIL | 0 | | 0.7 | V | VCC = 2.3 V to 2.7 V | 4 |
| Low-level control input voltage | VIL | 0 | | 0.8 | V | VCC = 2.7 V to 3.6 V | 4 |
| Data input/output voltage | VI/O | 0 | | 5.5 | V | | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Input clamp voltage | VIK | | | -1.8 | V | VCC = 3.6 V, II = −18 mA | 5 |
| Control input leakage current | IIN | -1 | | 1 | µA | VCC = 3.6 V, VIN = 0 to 5.5 V | 5 |
| Off-state I/O leakage current | IOZ | -1 | | 1 | µA | VCC = 3.6 V, VO = 0 to 5.5 V, VI = 0, Switch OFF, VIN = VCC or GND | 5 |
| Partial-power-down leakage current | Ioff | | | 1 | µA | VCC = 0, VO = 0 to 5.5 V, VI = 0 | 5 |
| Supply current | ICC | | 1 | 3 | mA | VCC = 3.6 V, II/O = 0, Switch ON or OFF, VIN = VCC or GND | 5 |
| Increase in supply current per control input at TTL level | ΔICC | | | 30 | µA | VCC = 3.6 V, One input at 3 V, Other inputs at VCC or GND | 5 |
| Dynamic power-supply current per control input | ICCD | | 0.15 | 0.25 | mA/MHz | VCC = 3.6 V, A and B ports open, Control input switching at 50% duty cycle | 5 |
| Control input capacitance | Cin | | 3.5 | 5 | pF | VCC = 3.3 V, VIN = 5.5 V, 3.3 V, or 0 | 5 |
| Input/output capacitance, switch OFF | Cio(OFF) | | 4 | 5 | pF | VCC = 3.3 V, Switch OFF, VIN = VCC or GND, VI/O = 5.5 V, 3.3 V, or 0 | 5 |
| Input/output capacitance, switch ON | Cio(ON) | | 10 | 12.5 | pF | VCC = 3.3 V, Switch ON, VIN = VCC or GND, VI/O = 5.5 V, 3.3 V, or 0 | 5 |
| ON-state resistance | ron | | 5 | 8 | Ω | VCC = 2.3 V, VI = 0, IO = 30 mA | 5 |
| ON-state resistance | ron | | 5 | 9 | Ω | VCC = 2.3 V, VI = 1.7 V, IO = −15 mA | 5 |
| ON-state resistance | ron | | 5 | 7 | Ω | VCC = 3 V, VI = 0, IO = 30 mA | 5 |
| Maximum switching frequency for control input | fOE | | | 20 | MHz | VO > VCC, VI = 5 V, RL ≥ 1 MΩ, CL = 0 | 5 |
| Propagation delay | tpd | | | 0.25 | ns | A or B to B or A | 5 |
| Enable time | ten | 1.5 | | 9 | ns | VCC = 2.5 V ± 0.2 V | 5 |
| Enable time | ten | 1.5 | | 8 | ns | VCC = 3.3 V ± 0.3 V | 5 |
| Disable time | tdis | 1 | | 8 | ns | VCC = 2.5 V ± 0.2 V | 5 |
| Disable time | tdis | 1 | | 7 | ns | VCC = 3.3 V ± 0.3 V | 5 |
| Package thermal impedance, DGG package | θJA | | 70 | | °C/W | DGG package, JESD 51-7 (Note 5) | 4 |
## CAD (Adom-generated)
- Symbol: `SN74CB3Q16210DGGR`
- Footprint: `Adom_Gen:Texas_Instruments_SN74_c404a0`
- 3D model: generated to fit the land (STEP)
- 3D model files: `sn74cb3q16210dggr-etched.step` / `sn74cb3q16210dggr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74cb3q16210dggr.step` / `sn74cb3q16210dggr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74cb3q16210.pdf) (19 pp, sha256 `e4486890b92c685b`, retrieved 2026-11-16, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/sn74cb3q16210dggr-datasheet.pdf)