main
Ray Publish 0.1.0 a529713

SN74AVCH1T45DCKR

Texas Instruments · Translators, Level Shifters · SC-70-6

SN74AVCH1T45DCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCCA power_in A-port supply voltage, 1.2 V ≤ VCCA ≤ 3.6 V, which sets the logic levels of the A port and the DIR control input.
2 GND power_in Device ground; connect ground before any supply voltage is applied to avoid excessive supply current and bus contention.
3 A bidirectional Input/output A, referenced to VCCA, with an absolute maximum range of -0.5 V to 4.6 V.
4 B bidirectional Input/output B, referenced to VCCB, with an absolute maximum range of -0.5 V to 4.6 V.
5 DIR input Direction control referenced to VCCA: high selects A-to-B transmission and low selects B-to-A; VIL is at most 0.8 V and VIH at least 2 V when VCCA is 2.7 V to 3.6 V.
6 VCCB power_in B-port supply voltage, 1.2 V ≤ VCCB ≤ 3.6 V, which sets the logic levels of the B port.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Logic
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCCA and VCCB -0.5 4.6 V 4
Input voltage I/O ports (A port) -0.5 4.6 V 4
Input voltage I/O ports (B port) -0.5 4.6 V 4
Input voltage control inputs -0.5 4.6 V 4
Voltage applied to any output in high-impedance or power-off state, A port -0.5 4.6 V 4
Voltage applied to any output in high-impedance or power-off state, B port -0.5 4.6 V 4
Voltage applied to any output in high or low state, A port -0.5 V 4
Voltage applied to any output in high or low state, B port -0.5 V 4
Input clamp current -50 mA VI < 0 4
Output clamp current -50 mA VO < 0 4
Continuous output current -50 50 mA 4
Continuous through current VCCA, VCCB, or GND -100 100 mA 4
Junction temperature TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCCA 1.2 3.6 V 4
High-level input voltage, data inputs VIH 1.6 V VCCI = 1.95 V to 2.7 V 4
High-level input voltage, data inputs VIH 2 V VCCI = 2.7 V to 3.6 V 4
Low-level input voltage, data inputs VIL 0.7 V VCCI = 1.95 V to 2.7 V 4
Low-level input voltage, data inputs VIL 0.8 V VCCI = 2.7 V to 3.6 V 4
High-level input voltage DIR (referenced to VCCA) VIH 1.6 V VCCI = 1.95 V to 2.7 V 4
High-level input voltage DIR (referenced to VCCA) VIH 2 V VCCI = 2.7 V to 3.6 V 4
Low-level input voltage DIR (referenced to VCCA) VIL 0.7 V VCCI = 1.95 V to 2.7 V 5
Low-level input voltage DIR (referenced to VCCA) VIL 0.8 V VCCI = 2.7 V to 3.6 V 5
Input voltage, control inputs VI 0 3.6 V 5
Output voltage, active state VO 0 V Active state 5
Output voltage, 3-state VO 0 3.6 V 3-state 5
High-level output current IOH -3 mA VCCO = 1.2 V 5
High-level output current IOH -6 mA VCCO = 1.4 V to 1.6 V 5
High-level output current IOH -8 mA VCCO = 1.65 V to 1.95 V 5
High-level output current IOH -9 mA VCCO = 2.3 V to 2.7 V 5
High-level output current IOH -12 mA VCCO = 3 V to 3.6 V 5
Low-level output current IOL 3 mA VCCO = 1.2 V 5
Low-level output current IOL 6 mA VCCO = 1.4 V to 1.6 V 5
Low-level output current IOL 8 mA VCCO = 1.65 V to 1.95 V 5
Low-level output current IOL 9 mA VCCO = 2.3 V to 2.7 V 5
Low-level output current IOL 12 mA VCCO = 3 V to 3.6 V 5
Input transition rise or fall rate Δt/Δv 5 ns/V 5
Operating free-air temperature TA -40 85 °C 5
High-level output voltage VOH 2.3 V IOH = -12 mA, VI = VIH, VCCA = VCCB = 3 V 6
Low-level output voltage VOL 0.7 V IOL = 12 mA, VI = VIL, VCCA = VCCB = 3 V 6
Control input (DIR) current II -1 0.025 1 μA VI = VCCA or GND, VCCA = VCCB = 1.2 V to 3.6 V 6
Bus-hold low sustaining current IBHL 100 μA VI = 0.8 V, VCCA = VCCB = 3.3 V 6
Bus-hold high sustaining current IBHH -100 μA VI = 2 V, VCCA = VCCB = 3.3 V 6
Bus-hold low overdrive current IBHLO 500 μA VI = 0 to VCC, VCCA = VCCB = 3.6 V 6
Bus-hold high overdrive current IBHHO -500 μA VI = 0 to VCC, VCCA = VCCB = 3.6 V 6
Input and output power-off leakage current, A port Ioff -5 0.1 5 μA VI = 0 V to 3.6 V, VO = 0 V to 3.6 V, VCCA = 0 V, VCCB = 0 V to 3.6 V 6
Input and output power-off leakage current, B port Ioff -5 0.1 5 μA VI = 0 V to 3.6 V, VO = 0 V to 3.6 V, VCCA = 0 V to 3.6 V, VCCB = 0 V 6
Off-state output current, A port IOZ -5 0.5 5 μA VI = VCCI or GND, VO = VCCO or GND, VCCA = 0 V, VCCB = 3.6 V 6
Off-state output current, B port IOZ -5 0.5 5 μA VI = VCCI or GND, VO = VCCO or GND, VCCA = 3.6 V, VCCB = 0 V 6
Supply current A port ICCA 10 μA VI = VCCI or GND, IO = 0, VCCA = VCCB = 1.2 V to 3.6 V 6
Supply current A port ICCA -2 μA VI = VCCI or GND, IO = 0, VCCA = 0 V, VCCB = 3.6 V 6
Supply current B port ICCB 10 μA VI = VCCI or GND, IO = 0, VCCA = VCCB = 1.2 V to 3.6 V 7
Supply current B port ICCB -2 μA VI = VCCI or GND, IO = 0, VCCA = 3.6 V, VCCB = 0 V 7
Combined supply current ICCA + ICCB 20 μA VI = VCCI or GND, IO = 0, VCCA = VCCB = 1.2 V to 3.6 V 7
Junction-to-ambient thermal resistance, DCK (SC70, 6 pins) RθJA 239.9 °C/W 5
Junction-to-case (top) thermal resistance, DCK (SC70, 6 pins) RθJC(top) 175 °C/W 5
Junction-to-board thermal resistance, DCK (SC70, 6 pins) RθJB 94.4 °C/W 5
Junction-to-top characterization parameter, DCK (SC70, 6 pins) ψJT 75.6 °C/W 5
Junction-to-board characterization parameter, DCK (SC70, 6 pins) ψJB 93.9 °C/W 5

CAD (KiCad official)

  • Symbol: SN74AVCH1T45DCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: sn74avch1t45dckr-etched.step / sn74avch1t45dckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74avch1t45dckr.step / sn74avch1t45dckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 e42b0c6787ae0c22, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF