component
SN74AUP2G00QDCURQ1
Public Made by Adomby adom
Texas Instruments Gates, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74AUP2G00QDCURQ1
Texas Instruments · Gates · VSSOP-8
SN74AUP2G00QDCURQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Gate 1 input A; inputs tolerate 0 to 3.6 V and unused inputs must be held at VCC or GND. |
| 2 | 1B | input | Gate 1 input B; inputs tolerate 0 to 3.6 V and unused inputs must be held at VCC or GND. |
| 3 | 2Y | output | Gate 2 NAND output (Y = NOT(A AND B)), swings 0 to VCC with IOH/IOL of 4 mA at VCC = 3 V. |
| 4 | GND | power_in | Ground; continuous current through VCC or GND is limited to ±50 mA. |
| 5 | 2A | input | Gate 2 input A; inputs tolerate 0 to 3.6 V and unused inputs must be held at VCC or GND. |
| 6 | 2B | input | Gate 2 input B; inputs tolerate 0 to 3.6 V and unused inputs must be held at VCC or GND. |
| 7 | 1Y | output | Gate 1 NAND output (Y = NOT(A AND B)), swings 0 to VCC with IOH/IOL of 4 mA at VCC = 3 V. |
| 8 | VCC | power_in | Supply voltage, recommended operating range 0.8 V to 3.6 V (absolute maximum 4.6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Logic ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 4.6 | V | 3 | ||
| Input voltage range | VI | -0.5 | 4.6 | V | 3 | ||
| Voltage range applied to any output in high-impedance or power-off state | VO | -0.5 | 4.6 | V | high-impedance or power-off state | 3 | |
| Output voltage range in high or low state | VO | -0.5 | V | high or low state | 3 | ||
| Input clamp current | IIK | -50 | mA | VI < 0 | 3 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 3 | ||
| Continuous output current | IO | -20 | 20 | mA | 3 | ||
| Continuous current through VCC or GND | -50 | 50 | mA | 3 | |||
| Package thermal impedance, junction to free air, DCU package | θJA | 220 | °C/W | DCU package | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Electrostatic discharge rating, Human-Body Model | 1000 | V | Human-Body Model (HBM) | 3 | |||
| Supply voltage | VCC | 0.8 | 3.6 | V | 4 | ||
| High-level input voltage | VIH | 1.6 | V | VCC = 2.3 V to 2.7 V | 4 | ||
| High-level input voltage | VIH | 2 | V | VCC = 3 V to 3.6 V | 4 | ||
| Low-level input voltage | VIL | 0 | V | VCC = 0.8 V | 4 | ||
| Low-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V | 4 | ||
| Low-level input voltage | VIL | 0.9 | V | VCC = 3 V to 3.6 V | 4 | ||
| Input voltage | VI | 0 | 3.6 | V | 4 | ||
| Output voltage | VO | 0 | V | 4 | |||
| High-level output current | IOH | -20 | mA | VCC = 0.8 V | 4 | ||
| High-level output current | IOH | -1.1 | mA | VCC = 1.1 V | 4 | ||
| High-level output current | IOH | -1.7 | mA | VCC = 1.4 V | 4 | ||
| High-level output current | IOH | -1.9 | mA | VCC = 1.65 V | 4 | ||
| High-level output current | IOH | -3.1 | mA | VCC = 2.3 V | 4 | ||
| High-level output current | IOH | -4 | mA | VCC = 3 V | 4 | ||
| Low-level output current | IOL | 20 | mA | VCC = 0.8 V | 4 | ||
| Low-level output current | IOL | 1.1 | mA | VCC = 1.1 V | 4 | ||
| Low-level output current | IOL | 1.7 | mA | VCC = 1.4 V | 4 | ||
| Low-level output current | IOL | 1.9 | mA | VCC = 1.65 V | 4 | ||
| Low-level output current | IOL | 3.1 | mA | VCC = 2.3 V | 4 | ||
| Low-level output current | IOL | 4 | mA | VCC = 3 V | 4 | ||
| Input transition rise or fall rate | Δt/Δv | 200 | ns/V | VCC = 0.8 V to 3.6 V | 4 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| High-level output voltage | VOH | 1.03 | V | IOH = -1.7 mA; VCC = 1.4 V; TA = -40°C to 125°C | 5 | ||
| High-level output voltage | VOH | 1.3 | V | IOH = -1.9 mA; VCC = 1.65 V; TA = -40°C to 125°C | 5 | ||
| High-level output voltage | VOH | 1.97 | V | IOH = -2.3 mA; VCC = 2.3 V; TA = -40°C to 125°C | 5 | ||
| High-level output voltage | VOH | 1.85 | V | IOH = -3.1 mA; VCC = 2.3 V; TA = -40°C to 125°C | 5 | ||
| High-level output voltage | VOH | 2.67 | V | IOH = -2.7 mA; VCC = 3 V; TA = -40°C to 125°C | 5 | ||
| High-level output voltage | VOH | 2.55 | V | IOH = -4 mA; VCC = 3 V; TA = -40°C to 125°C | 5 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 20 mA; VCC = 0.8 V to 3.6 V; TA = -40°C to 125°C | 5 | ||
| Low-level output voltage | VOL | 0.37 | V | IOL = 1.7 mA; VCC = 1.4 V; TA = -40°C to 125°C | 5 | ||
| Low-level output voltage | VOL | 0.35 | V | IOL = 1.9 mA; VCC = 1.65 V; TA = -40°C to 125°C | 5 | ||
| Low-level output voltage | VOL | 0.33 | V | IOL = 2.3 mA; VCC = 2.3 V; TA = -40°C to 125°C | 5 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL = 3.1 mA; VCC = 2.3 V; TA = -40°C to 125°C | 5 | ||
| Input current, A or B input | II | 0.1 | 0.5 | mA | VI = GND to 3.6 V; VCC 0 V to 3.6 V | 5 | |
| Power-off leakage current | Ioff | 0.2 | 1.3 | mA | VI or VO = 0 V to 3.6 V; VCC = 0 V | 5 | |
| Change in power-off leakage current | ΔIoff | 0.2 | 2 | mA | VI or VO = 0 V to 3.6 V; VCC 0 V to 0.2 V | 5 | |
| Quiescent supply current | ICC | 0.5 | 1.7 | mA | VI = GND or (VCC to 3.6 V); IO = 0; VCC 0.8 V to 3.6 V | 5 | |
| Change in supply current per input at VCC, 0.6 V | ΔICC | 40 | 50 | mA | VI = VCC, 0.6 V (one input); IO = 0; VCC 3.3 V | 5 | |
| Propagation delay A or B to Y, CL = 15 pF, VCC 0.8 V | tpd | 24.7 | ns | CL = 15 pF; VCC = 0.8 V | 6 | ||
| Propagation delay A or B to Y, CL = 15 pF, VCC 1.2 V ± 0.1 V | tpd | 3.1 | 9.8 | 24.8 | ns | CL = 15 pF; VCC = 1.2 V ± 0.1 V; min/max TA = -40°C to 125°C; typ TA = 25°C | 6 |
| Propagation delay A or B to Y, CL = 15 pF, VCC 1.5 V ± 0.1 V | tpd | 1.8 | 4.6 | 15.8 | ns | CL = 15 pF; VCC = 1.5 V ± 0.1 V; min/max TA = -40°C to 125°C; typ TA = 25°C | 6 |
| Propagation delay A or B to Y, CL = 15 pF, VCC 1.8 V ± 0.15 V | tpd | 1.1 | 5.5 | 11.7 | ns | CL = 15 pF; VCC = 1.8 V ± 0.15 V; min/max TA = -40°C to 125°C; typ TA = 25°C | 6 |
| Propagation delay A or B to Y, CL = 15 pF, VCC 2.5 V ± 0.2 V | tpd | 0.5 | 4 | 7.5 | ns | CL = 15 pF; VCC = 2.5 V ± 0.2 V; min/max TA = -40°C to 125°C; typ TA = 25°C | 6 |
| Propagation delay A or B to Y, CL = 15 pF, VCC 3.3 V ± 0.3 V | tpd | 0.5 | 3.3 | 6.4 | ns | CL = 15 pF; VCC = 3.3 V ± 0.3 V; min/max TA = -40°C to 125°C; typ TA = 25°C | 6 |
CAD (KiCad official)
- Symbol:
SN74AUP2G00QDCURQ1 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
sn74aup2g00qdcurq1-etched.step/sn74aup2g00qdcurq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74aup2g00qdcurq1.step/sn74aup2g00qdcurq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (16 pp, sha256
41dfd1ac34c54557, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).