← Commit history

Initial commit: component/sn74aup1g79dbvr

Ray ·a40fe439b4 ·
2 files changed +178
README.mdadded+41
@@ -0,0 +1,41 @@+# SN74AUP1G79DBVR++**Texas Instruments** · Flip Flops · SOT-23-5++SN74AUP1G79DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | D | input | Data input; data present here meets setup-time requirement and transfers to Q output on positive-going edge of CLK per page 8 timing requirements. |+| 2 | CLK | input | Positive-edge-triggered clock input; controls timing of data transfer from D to Q output on positive-going clock edge. |+| 3 | GND | power_in | Ground pin; negative supply reference for the device. |+| 4 | Q | output | Q output; captures and reflects the state of D input at each positive-going clock edge; single output from D-type flip-flop. |+| 5 | VCC | power_in | Positive supply voltage, 0.8 V to 3.6 V per recommended operating conditions on page 5; typical operation at 3.3 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-23-5 |+| Category | Logic |+| Pins | 5 |++## CAD (KiCad official)++- Symbol: `SN74AUP1G79DBVR`+- Footprint: `Package_TO_SOT_SMD:SOT-23-5`+- 3D model: SOT-23-5 (KiCad packages3D, STEP)+- 3D model files: `sn74aup1g79dbvr-etched.step` / `sn74aup1g79dbvr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74aup1g79dbvr.step` / `sn74aup1g79dbvr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74aup1g79.pdf) (50 pp, sha256 `0de62768dd303382`, retrieved 2026-09-24, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn74aup1g79dbvr-datasheet.pdf)
page.jsonadded+137
@@ -0,0 +1,137 @@+{+  "slug": "sn74aup1g79dbvr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Flip Flops, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "sn74aup1g79dbvr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "sn74aup1g79dbvr.kicad_sym",+    "sn74aup1g79dbvr.kicad_mod",+    "sn74aup1g79dbvr.glb",+    "sn74aup1g79dbvr.step",+    "sn74aup1g79dbvr.lbr",+    "docs/hero.png",+    "docs/sn74aup1g79dbvr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "SN74AUP1G79DBVR",+    "manufacturer": "Texas Instruments",+    "package": "SOT-23-5",+    "pin_count": 5,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74aup1g79.pdf",+    "parts": {+      "symbol": "sn74aup1g79dbvr.kicad_sym",+      "footprint": "sn74aup1g79dbvr.kicad_mod",+      "model_3d": "sn74aup1g79dbvr-etched.glb",+      "model_3d_plain": "sn74aup1g79dbvr.glb",+      "model_3d_step": "sn74aup1g79dbvr-etched.step",+      "model_3d_step_plain": "sn74aup1g79dbvr.step",+      "lbr": "sn74aup1g79dbvr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2677850",+      "digikey": "296-17659-2-ND",+      "mouser": "595-SN74AUP1G79DBVR"+    },+    "distributor_check": {+      "checked_at": "2026-09-24T23:37:09Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-17659-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-SN74AUP1G79DBVR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "D",+        "type": "input",+        "description": "Data input; data present here meets setup-time requirement and transfers to Q output on positive-going edge of CLK per page 8 timing requirements."+      },+      {+        "number": "2",+        "name": "CLK",+        "type": "input",+        "description": "Positive-edge-triggered clock input; controls timing of data transfer from D to Q output on positive-going clock edge."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin; negative supply reference for the device."+      },+      {+        "number": "4",+        "name": "Q",+        "type": "output",+        "description": "Q output; captures and reflects the state of D input at each positive-going clock edge; single output from D-type flip-flop."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage, 0.8 V to 3.6 V per recommended operating conditions on page 5; typical operation at 3.3 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 50,+        "cost_usd": 0.2412,+        "at": "2026-09-24T23:36:49"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/sn74aup1g79.pdf",+        "pages": 50,+        "sha256": "0de62768dd303382",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 5,+        "described": 5,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file