component
SN74AUP1G79DBVR
Public Made by Adomby adom
Texas Instruments Flip Flops, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74AUP1G79DBVR
Texas Instruments · Flip Flops · SOT-23-5
SN74AUP1G79DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D | input | Data input; data present here meets setup-time requirement and transfers to Q output on positive-going edge of CLK per page 8 timing requirements. |
| 2 | CLK | input | Positive-edge-triggered clock input; controls timing of data transfer from D to Q output on positive-going clock edge. |
| 3 | GND | power_in | Ground pin; negative supply reference for the device. |
| 4 | Q | output | Q output; captures and reflects the state of D input at each positive-going clock edge; single output from D-type flip-flop. |
| 5 | VCC | power_in | Positive supply voltage, 0.8 V to 3.6 V per recommended operating conditions on page 5; typical operation at 3.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Logic |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
SN74AUP1G79DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
sn74aup1g79dbvr-etched.step/sn74aup1g79dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74aup1g79dbvr.step/sn74aup1g79dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
0de62768dd303382, retrieved 2026-09-24, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).