component
SN74AUP1G17MDCKREP
Public Made by Adomby adom
Texas Instruments Buffers / Drivers, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74AUP1G17MDCKREP
Texas Instruments · Buffers / Drivers · SC-70-5
SN74AUP1G17MDCKREP from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection; not internally connected to the die. |
| 2 | A | input | Schmitt-trigger buffer input; tolerant to 3.6 V (VI 0 to 3.6 V) and must be held at VCC or GND when unused. |
| 3 | GND | power_in | Ground. |
| 4 | Y | output | Buffer output, follows input A (non-inverting); output voltage range 0 to VCC, IOH/IOL up to 4 mA at 3 V. |
| 5 | VCC | power_in | Supply voltage, 0.8 V to 3.6 V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Logic ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 4.6 | V | 3 | ||
| Input voltage range | VI | -0.5 | 4.6 | V | 3 | ||
| Voltage applied to any output in high-impedance or power-off state | VO | -0.5 | 4.6 | V | 3 | ||
| Output voltage range in high or low state | VO | -0.5 | V | max VCC + 0.5 V | 3 | ||
| Input clamp current | IIK | -50 | mA | VI < 0 | 3 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 3 | ||
| Continuous output current | IO | -20 | 20 | mA | 3 | ||
| Continuous current through VCC or GND | -50 | 50 | mA | 3 | |||
| Package thermal impedance | θJA | 227 | °C/W | DCK package | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Supply voltage | VCC | 0.8 | 3.6 | V | 3 | ||
| Input voltage | VI | 0 | 3.6 | V | 3 | ||
| Operating free-air temperature | TA | -55 | 125 | °C | 3 | ||
| Positive-going input threshold voltage | VT+ | 0.3 | 0.6 | V | VCC = 0.8 V | 4 | |
| Positive-going input threshold voltage | VT+ | 0.53 | 0.9 | V | VCC = 1.1 V | 4 | |
| Positive-going input threshold voltage | VT+ | 0.74 | 1.11 | V | VCC = 1.4 V | 4 | |
| Positive-going input threshold voltage | VT+ | 0.91 | 1.29 | V | VCC = 1.65 V | 4 | |
| Positive-going input threshold voltage | VT+ | 1.37 | 1.77 | V | VCC = 2.3 V | 4 | |
| Positive-going input threshold voltage | VT+ | 1.88 | 2.29 | V | VCC = 3 V | 4 | |
| Negative-going input threshold voltage | VT- | 0.1 | 0.6 | V | VCC = 0.8 V | 4 | |
| Negative-going input threshold voltage | VT- | 0.26 | 0.65 | V | VCC = 1.1 V | 4 | |
| Negative-going input threshold voltage | VT- | 0.39 | 0.75 | V | VCC = 1.4 V | 4 | |
| Negative-going input threshold voltage | VT- | 0.47 | 0.84 | V | VCC = 1.65 V | 4 | |
| Negative-going input threshold voltage | VT- | 0.69 | 1.04 | V | VCC = 2.3 V | 4 | |
| Negative-going input threshold voltage | VT- | 0.88 | 1.24 | V | VCC = 3 V | 4 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.07 | 0.5 | V | VCC = 0.8 V | 4 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.08 | 0.46 | V | VCC = 1.1 V | 4 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.18 | 0.56 | V | VCC = 1.4 V | 4 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.27 | 0.66 | V | VCC = 1.65 V | 4 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.53 | 0.92 | V | VCC = 2.3 V | 4 | |
| Hysteresis (VT+, VT-) | ΔVT | 0.79 | 1.31 | V | VCC = 3 V | 4 | |
| High-level output voltage | VOH | 1.03 | V | IOH = -1.7 mA, VCC = 1.4 V | 4 | ||
| High-level output voltage | VOH | 1.3 | V | IOH = -1.9 mA, VCC = 1.65 V | 4 | ||
| High-level output voltage | VOH | 1.97 | V | IOH = -2.3 mA, VCC = 2.3 V | 4 | ||
| High-level output voltage | VOH | 1.85 | V | IOH = -3.1 mA, VCC = 2.3 V | 4 | ||
| High-level output voltage | VOH | 2.67 | V | IOH = -2.7 mA, VCC = 3 V | 4 | ||
| High-level output voltage | VOH | 2.55 | V | IOH = -4 mA, VCC = 3 V | 4 | ||
| Low-level output voltage | VOL | 0.37 | V | IOL = 1.7 mA, VCC = 1.4 V | 4 | ||
| Low-level output voltage | VOL | 0.35 | V | IOL = 1.9 mA, VCC = 1.65 V | 4 | ||
| Low-level output voltage | VOL | 0.33 | V | IOL = 2.3 mA, VCC = 2.3 V | 4 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL = 3.1 mA, VCC = 2.3 V | 4 | ||
| Low-level output voltage | VOL | 0.475 | V | IOL = 4 mA, VCC = 3 V | 4 | ||
| Input current, all inputs | II | 0.5 | µA | VI = GND to 3.6 V, VCC = 0 V to 3.6 V | 4 | ||
| Input/output power-off leakage current | Ioff | 5 | µA | VI or VO = 0 V to 3.6 V, VCC = 0 V | 4 | ||
| Change in power-off leakage current | ΔIoff | 5 | µA | VI or VO = 0 V to 3.6 V, VCC = 0 V to 0.2 V | 4 | ||
| Supply current | ICC | 0.9 | µA | VI = GND or (VCC to 3.6 V), IO = 0, VCC = 0.8 V to 3.6 V | 4 | ||
| Additional supply current | ΔICC | 50 | µA | VI = VCC, 0.6 V, IO = 0, VCC = 3.3 V | 4 | ||
| Propagation delay A to Y | tpd | 7.5 | 28 | ns | VCC = 1.2 V ± 0.1 V, CL = 50 pF | 5 | |
| Propagation delay A to Y | tpd | 5.6 | 20 | ns | VCC = 1.5 V ± 0.1 V, CL = 50 pF | 5 | |
| Propagation delay A to Y | tpd | 4.8 | 17 | ns | VCC = 1.8 V ± 0.15 V, CL = 50 pF | 5 | |
| Propagation delay A to Y | tpd | 4 | 13 | ns | VCC = 2.5 V ± 0.2 V, CL = 50 pF | 5 | |
| Propagation delay A to Y | tpd | 3.6 | 11 | ns | VCC = 3.3 V ± 0.3 V, CL = 50 pF | 5 | |
| Input capacitance | Ci | 1.5 | pF | VI = VCC or GND, VCC = 0 V | 4 | ||
| Output capacitance | Co | 2.5 | pF | VO = GND, VCC = 0 V | 4 | ||
| Power dissipation capacitance | Cpd | 4.4 | pF | f = 10 MHz, VCC = 3.3 V ± 0.3 V, TA = 25°C | 5 |
CAD (KiCad official)
- Symbol:
SN74AUP1G17MDCKREP - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
sn74aup1g17mdckrep-etched.step/sn74aup1g17mdckrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74aup1g17mdckrep.step/sn74aup1g17mdckrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (14 pp, sha256
9517bab27cdae685, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).