main
Ray sn74aup1g17drlr: CAD wording names the Adom_Gen land, not KiCad official d50237f

SN74AUP1G17DRLR

Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SOT-5

SN74AUP1G17DRLR from Texas Instruments, in a SOT-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 N.C. unconnected No internal connection on the DRL package; pin 1 is not connected internally.
2 A input Schmitt-trigger gate input with 3.6-V I/O tolerance, recommended input range 0 V to 3.6 V and absolute maximum input voltage of 4.6 V.
3 GND power_in Ground reference pin for the device.
4 Y output Balanced push-pull CMOS output; at VCC = 3 V it is specified for IOH of -4 mA and IOL of 4 mA, with absolute maximum continuous output current of ±20 mA.
5 VCC power_in Positive supply; recommended operating range 0.8 V to 3.6 V with absolute maximum supply voltage of 4.6 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-5
Category Logic
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 0.8 3.6 V 4
Input voltage VI 0 3.6 V 4
Output voltage VO 0 V 4
High-level output current IOH -1.1 mA VCC = 1.1 V 4
High-level output current IOH -1.7 mA VCC = 1.4 V 4
High-level output current IOH -1.9 mA VCC = 1.65 V 4
High-level output current IOH -3.1 mA VCC = 2.3 V 4
High-level output current IOH -4 mA VCC = 3 V 4
Low-level output current IOL 1.1 mA VCC = 1.1 V 4
Low-level output current IOL 1.7 mA VCC = 1.4 V 4
Low-level output current IOL 1.9 mA VCC = 1.65 V 4
Low-level output current IOL 3.1 mA VCC = 2.3 V 4
Low-level output current IOL 4 mA VCC = 3 V 4
Supply voltage VCC -0.5 4.6 V 4
Input voltage VI -0.5 4.6 V 4
Voltage range applied to any output in high-impedance or power-off state VO -0.5 4.6 V 4
Input clamp current IIK -50 mA VI < 0 4
Output clamp current IOK -50 mA VO < 0 4
Continuous output current IO -20 20 mA 4
Continuous current through VCC or GND -50 50 mA 4
Junction temperature Tj 150 °C 4
Positive-going input threshold voltage VT+ 0.3 0.6 V VCC = 0.8 V; TA = -40°C to +85°C 5
Positive-going input threshold voltage VT+ 0.53 0.9 V VCC = 1.1 V; TA = -40°C to +85°C 5
Positive-going input threshold voltage VT+ 0.74 1.11 V VCC = 1.4 V; TA = -40°C to +85°C 5
Positive-going input threshold voltage VT+ 0.91 1.29 V VCC = 1.65 V; TA = -40°C to +85°C 5
Positive-going input threshold voltage VT+ 1.37 1.77 V VCC = 2.3 V; TA = -40°C to +85°C 5
Positive-going input threshold voltage VT+ 1.88 2.29 V VCC = 3 V; TA = -40°C to +85°C 5
Negative-going input threshold voltage VT- 0.1 0.6 V VCC = 0.8 V; TA = -40°C to +85°C 5
Negative-going input threshold voltage VT- 0.26 0.65 V VCC = 1.1 V; TA = -40°C to +85°C 5
Negative-going input threshold voltage VT- 0.39 0.75 V VCC = 1.4 V; TA = -40°C to +85°C 5
Negative-going input threshold voltage VT- 0.47 0.84 V VCC = 1.65 V; TA = -40°C to +85°C 5
Negative-going input threshold voltage VT- 0.69 1.04 V VCC = 2.3 V; TA = -40°C to +85°C 5
Negative-going input threshold voltage VT- 0.88 1.24 V VCC = 3 V; TA = -40°C to +85°C 5
Hysteresis (VT+, VT-) ΔVT 0.07 0.5 V VCC = 0.8 V; TA = -40°C to +85°C 6
Hysteresis (VT+, VT-) ΔVT 0.08 0.46 V VCC = 1.1 V; TA = -40°C to +85°C 6
Hysteresis (VT+, VT-) ΔVT 0.18 0.56 V VCC = 1.4 V; TA = -40°C to +85°C 6
Hysteresis (VT+, VT-) ΔVT 0.27 0.66 V VCC = 1.65 V; TA = -40°C to +85°C 6
Hysteresis (VT+, VT-) ΔVT 0.53 0.92 V VCC = 2.3 V; TA = -40°C to +85°C 6
Hysteresis (VT+, VT-) ΔVT 0.79 1.31 V VCC = 3 V; TA = -40°C to +85°C 6
High-level output voltage VOH 1.03 V VCC = 1.4 V; IOH = -1.7 mA; TA = -40°C to +85°C 6
High-level output voltage VOH 1.3 V VCC = 1.65 V; IOH = -1.9 mA; TA = -40°C to +85°C 6
High-level output voltage VOH 1.97 V VCC = 2.3 V; IOH = -2.3 mA; TA = -40°C to +85°C 6
High-level output voltage VOH 1.85 V IOH = -3.1 mA; TA = -40°C to +85°C 6
High-level output voltage VOH 2.67 V VCC = 3 V; IOH = -2.7 mA; TA = -40°C to +85°C 6
High-level output voltage VOH 2.55 V IOH = -4 mA; TA = -40°C to +85°C 6
Low-level output voltage VOL 0.1 V VCC = 0.8 V to 3.6 V; IOL = 20 µA; TA = -40°C to +85°C 6
Low-level output voltage VOL 0.37 V VCC = 1.4 V; IOL = 1.7 mA; TA = -40°C to +85°C 6
Low-level output voltage VOL 0.35 V VCC = 1.65 V; IOL = 1.9 mA; TA = -40°C to +85°C 6
Low-level output voltage VOL 0.33 V VCC = 2.3 V; IOL = 2.3 mA; TA = -40°C to +85°C 6
Low-level output voltage VOL 0.45 V IOL = 3.1 mA; TA = -40°C to +85°C 6
Input leakage current (A inputs) II 0.5 µA VI = GND to 3.6 V; VCC = 0 V to 3.6 V; TA = -40°C to +85°C 7
Power-off leakage current Ioff 0.6 µA VI or VO = 0 V to 3.6 V; VCC = 0 V; TA = -40°C to +85°C 7
Change in power-off leakage current ΔIoff 0.6 µA VI or VO = 0 V to 3.6 V; VCC = 0 V to 0.2 V; TA = -40°C to +85°C 7
Quiescent supply current ICC 0.9 µA VI = GND or (VCC to 3.6 V), IO = 0; VCC = 0.8 V to 3.6 V; TA = -40°C to +85°C 7
Change in quiescent supply current ΔICC 50 µA VI = VCC, 0.6 V, IO = 0; VCC = 3.3 V; TA = -40°C to +85°C 7
Junction-to-ambient thermal resistance (DRL) RθJA 294.7 °C/W DRL (SOT-5X3) package 5
Junction-to-case (top) thermal resistance (DRL) RθJC(top) 132.5 °C/W DRL (SOT-5X3) package 5
Junction-to-board thermal resistance (DRL) RθJB 143.6 °C/W DRL (SOT-5X3) package 5

CAD (Adom-generated)

  • Symbol: SN74AUP1G17DRLR
  • Footprint: Adom_Gen:Texas_Instruments_SN74_badc8d
  • 3D model: generated to fit the land (STEP)
  • 3D model files: sn74aup1g17drlr-etched.step / sn74aup1g17drlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74aup1g17drlr.step / sn74aup1g17drlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (54 pp, sha256 b59bfa5c4d9d6b4c, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF