SN74AUP1G06DRLR

{
  "slug": "sn74aup1g06drlr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Inverters, SOT-553. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "sn74aup1g06drlr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74aup1g06drlr.kicad_sym",
    "sn74aup1g06drlr.kicad_mod",
    "sn74aup1g06drlr.glb",
    "sn74aup1g06drlr.step",
    "sn74aup1g06drlr.lbr",
    "docs/hero.png",
    "docs/sn74aup1g06drlr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn74aup1g06drlr-hero.glb",
    "sn74aup1g06drlr-hero.overlay.json"
  ],
  "component": {
    "mpn": "SN74AUP1G06DRLR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-553",
    "pin_count": 5,
    "category": "Logic",
    "subcategory": "Inverters",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74aup1g06.pdf",
    "parts": {
      "symbol": "sn74aup1g06drlr.kicad_sym",
      "footprint": "sn74aup1g06drlr.kicad_mod",
      "model_3d": "sn74aup1g06drlr-hero.glb",
      "model_3d_plain": "sn74aup1g06drlr.glb",
      "model_3d_step": "sn74aup1g06drlr-etched.step",
      "model_3d_step_plain": "sn74aup1g06drlr.step",
      "lbr": "sn74aup1g06drlr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2865935",
      "digikey": "296-SN74AUP1G06DRLRTR-ND",
      "mouser": "595-SN74AUP1G06DRLR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T11:11:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-SN74AUP1G06DRLRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-SN74AUP1G06DRLR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection on this pin for the DRL package."
      },
      {
        "number": "2",
        "name": "A",
        "type": "input",
        "description": "Single-inverter input with a 0 V to 3.6 V input voltage range and standard CMOS input behavior, so slow or floating inputs should be avoided."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "4",
        "name": "Y",
        "type": "output",
        "description": "Open-drain output that goes high only through an external pull-up resistor, with output voltage limited to 0 V to 3.6 V."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply pin; the recommended operating supply range is 0.8 V to 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package naming mismatch: the hint says SOT-553, but the datasheet and ordering addendum call the DRL; Pin descriptions draw limits from other pages: the input voltage range (0 to 3.6 V) and CMOS input n; Pin 4 (Y) is listed as type O (output) in the datasheet; it is an open-drain output, so it is classe"
        ],
        "pages_sent": 14,
        "cost_usd": 0.0643,
        "at": "2026-10-11T11:11:10"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn74aup1g06.pdf",
        "pages": 52,
        "sha256": "22c139293d086fb2",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74aup1g06drlr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2219d28dc74f980a4614180a52f390c2a095740e92ee987e4ac96f80edf01c52",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74aup1g06drlr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          1.6,
          1.6,
          0.63
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dc7ffda3afc5bbb195d08b0f15f00250c49c822121b373e07a699989913d888e",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}