component
SN74AUP1G06DCKR
Public Made by Adomby adom
Texas Instruments Inverters, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74AUP1G06DCKR
Texas Instruments · Inverters · SC-70-5
SN74AUP1G06DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; this pin is not connected inside the device. |
| 2 | A | input | Logic input; the recommended input voltage range is 0 V to 3.6 V, and slow or floating inputs should be avoided to prevent oscillation or excessive current. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | Y | output | Open-drain output that needs an external pull-up resistor to reach a high level; output voltage is limited to 0 V to 3.6 V and continuous output current is limited to ±20 mA (absolute maximum). |
| 5 | VCC | power_in | Positive supply; the recommended supply range is 0.8 V to 3.6 V, with a bypass capacitor (0.1 µF for a single-supply device) installed as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Logic |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
SN74AUP1G06DCKR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
sn74aup1g06dckr-etched.step/sn74aup1g06dckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74aup1g06dckr.step/sn74aup1g06dckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
22c139293d086fb2, retrieved 2026-10-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).