SN74AUC1G79DBVR

{
  "slug": "sn74auc1g79dbvr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Flip Flops, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "logic",
    "sn74auc1g79dbvr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74auc1g79dbvr.kicad_sym",
    "sn74auc1g79dbvr.kicad_mod",
    "sn74auc1g79dbvr.glb",
    "sn74auc1g79dbvr.step",
    "sn74auc1g79dbvr.lbr",
    "docs/hero.png",
    "docs/sn74auc1g79dbvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn74auc1g79dbvr-hero.glb",
    "sn74auc1g79dbvr-hero.overlay.json"
  ],
  "component": {
    "mpn": "SN74AUC1G79DBVR",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Logic",
    "subcategory": "Flip Flops",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn74auc1g79.pdf",
    "parts": {
      "symbol": "sn74auc1g79dbvr.kicad_sym",
      "footprint": "sn74auc1g79dbvr.kicad_mod",
      "model_3d": "sn74auc1g79dbvr-hero.glb",
      "model_3d_plain": "sn74auc1g79dbvr.glb",
      "model_3d_step": "sn74auc1g79dbvr-etched.step",
      "model_3d_step_plain": "sn74auc1g79dbvr.step",
      "lbr": "sn74auc1g79dbvr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2869706",
      "digikey": "296-15430-2-ND",
      "mouser": "595-SN74AUC1G79DBVR"
    },
    "distributor_check": {
      "checked_at": "2026-10-10T20:01:40Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-15430-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-SN74AUC1G79DBVR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "D",
        "type": "input",
        "description": "Data input; data must meet the setup time before the positive CLK edge and the hold time after it, and input voltage is specified from 0 V to 3.6 V."
      },
      {
        "number": "2",
        "name": "CLK",
        "type": "input",
        "description": "Clock input; the D value is transferred to Q on the positive-going CLK edge, and the input rise or fall rate must not exceed 20 ns/V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; the datasheet gives no additional limit for this pin."
      },
      {
        "number": "4",
        "name": "Q",
        "type": "output",
        "description": "Latched output that follows D on each positive CLK edge, with continuous output current limited to ±20 mA and output voltage ranging from 0 V to VCC."
      },
      {
        "number": "5",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply; recommended operating range is 0.8 V to 2.7 V (designed specifically for 1.65 V to 1.95 V operation), with an absolute maximum of 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table (page 3) gives pin numbers for DBV and DCK together; the DBV (SOT-23-5) numbering is t"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0658,
        "at": "2026-10-10T20:01:26"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn74auc1g79.pdf",
        "pages": 20,
        "sha256": "728ba576a4be1387",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74auc1g79dbvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74auc1g79dbvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d4818fd0eb7b3818f4193829857f1cdf81d4a314fa5a5098dc12fcc30650812",
        "checked": "2026-10-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}