# SN74AUC1G07DCKR

**Texas Instruments** · Logic ICs · SC-70-5

SN74AUC1G07DCKR from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | A | input | Logic input; the datasheet rates the input voltage at 0 V to 3.6 V. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | Y | output | Open-drain output; the output is low when A is low and high-impedance (Hi-Z) when A is high, so an external pull-up is needed for a high level. |
| 5 | VCC | power_in | Positive supply; recommended VCC is 0.8 V to 2.7 V, designed specifically for 1.65 V to 1.95 V operation. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Logic ICs |
| Pins | 5 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 |  | 3.6 | V |  | 4 |
| Input voltage | VI | -0.5 |  | 3.6 | V |  | 4 |
| Output voltage | VO | -0.5 |  | 3.6 | V |  | 4 |
| Input clamp current | IIK | -50 |  |  | mA | VI < 0 | 4 |
| Output clamp current | IOK | -50 |  |  | mA | VO < 0 | 4 |
| Continuous output current | IO | -20 |  | 20 | mA |  | 4 |
| Continuous current through VCC or GND |  | -100 |  | 100 | mA |  | 4 |
| Storage temperature | Tstg | -65 |  | 150 | °C |  | 4 |
| Supply voltage | VCC | 0.8 |  | 2.7 | V |  | 4 |
| High-level input voltage | VIH | 1.7 |  |  | V | VCC = 2.3 V to 2.7 V | 4 |
| Low-level input voltage | VIL |  |  | 0 | V | VCC = 0.8 V | 4 |
| Low-level input voltage | VIL |  |  | 0.7 | V | VCC = 2.3 V to 2.7 V | 4 |
| Input voltage | VI | 0 |  | 3.6 | V |  | 4 |
| Output voltage | VO | 0 |  | 3.6 | V |  | 4 |
| Low-level output current | IOL |  |  | 0.7 | mA | VCC = 0.8 V | 4 |
| Low-level output current | IOL |  |  | 3 | mA | VCC = 1.1 V | 4 |
| Low-level output current | IOL |  |  | 5 | mA | VCC = 1.4 V | 4 |
| Low-level output current | IOL |  |  | 8 | mA | VCC = 1.65 V | 4 |
| Low-level output current | IOL |  |  | 9 | mA | VCC = 2.3 V | 4 |
| Input transition rise or fall rate | Δt/Δv |  |  | 15 | ns/V |  | 4 |
| Operating free-air temperature | TA | -40 |  | 85 | °C |  | 4 |
| Junction-to-ambient thermal resistance (DCK, SC70, 5 pins) | RθJA |  | 252 |  | °C/W | DCK (SC70) package, 5 pins | 5 |
| Low-level output voltage | VOL |  |  | 0.2 | V | IOL = 100 µA, VCC = 0.8 V to 2.7 V | 5 |
| Low-level output voltage | VOL |  |  | 0.25 | V | IOL = 0.7 mA, VCC = 0.8 V | 5 |
| Low-level output voltage | VOL |  |  | 0.3 | V | IOL = 3 mA, VCC = 1.1 V | 5 |
| Low-level output voltage | VOL |  |  | 0.4 | V | IOL = 5 mA, VCC = 1.4 V | 5 |
| Low-level output voltage | VOL |  |  | 0.45 | V | IOL = 8 mA, VCC = 1.65 V | 5 |
| Low-level output voltage | VOL |  |  | 0.6 | V | IOL = 9 mA, VCC = 2.3 V | 5 |
| A input current | II | -5 |  | 5 | µA | VI = VCC or GND, VCC = 0 to 2.7 V | 5 |
| Power-off leakage current | Ioff | -10 |  | 10 | µA | VI or VO = 2.7 V, VCC = 0 | 5 |
| Supply current | ICC |  |  | 10 | µA | VI = VCC or GND, IO = 0, VCC = 0.8 V to 2.7 V | 5 |
| Propagation delay A to Y | tpd |  | 4.7 |  | ns | CL = 15 pF, VCC = 0.8 V | 5 |
| Propagation delay A to Y | tpd | 0.3 |  | 3.3 | ns | CL = 15 pF, VCC = 1.2 V ± 0.1 V | 5 |
| Propagation delay A to Y | tpd | 0.2 |  | 2.4 | ns | CL = 15 pF, VCC = 1.5 V ± 0.1 V | 5 |
| Propagation delay A to Y | tpd | 0.2 | 1.1 | 2.3 | ns | CL = 15 pF, VCC = 1.8 V ± 0.15 V | 5 |
| Propagation delay A to Y | tpd | 0.2 |  | 1.8 | ns | CL = 15 pF, VCC = 2.5 V ± 0.2 V | 5 |
| Propagation delay A to Y | tpd | 0.8 | 1.9 | 2.5 | ns | CL = 30 pF, VCC = 1.8 V ± 0.15 V | 5 |

## CAD (KiCad official)

- Symbol: `SN74AUC1G07DCKR`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `sn74auc1g07dckr-etched.step` / `sn74auc1g07dckr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74auc1g07dckr.step` / `sn74auc1g07dckr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74auc1g07.pdf) (22 pp, sha256 `3588012646b48f9c`, retrieved 2026-10-21, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/sn74auc1g07dckr-datasheet.pdf)