component
SN74AS1004AN
Public Made by Adomby adom
Texas Instruments Inverters, PDIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SN74AS1004AN
Texas Instruments · Inverters · PDIP-14
SN74AS1004AN from Texas Instruments, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Input of inverter 1 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 2 | 1Y | output | Inverted output of driver 1; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 3 | 2A | input | Input of inverter 2 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 4 | 2Y | output | Inverted output of driver 2; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 5 | 3A | input | Input of inverter 3 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 6 | 3Y | output | Inverted output of driver 3; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 7 | GND | power_in | Ground reference for the device. |
| 8 | 4Y | output | Inverted output of driver 4; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 9 | 4A | input | Input of inverter 4 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 10 | 5Y | output | Inverted output of driver 5; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 11 | 5A | input | Input of inverter 5 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 12 | 6Y | output | Inverted output of driver 6; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 13 | 6A | input | Input of inverter 6 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 14 | VCC | power_in | Supply voltage: 4.5 V minimum, 5 V nominal, 5.5 V maximum for the SN74AS1004A; absolute maximum is 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-14 |
| Category | Logic ICs |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level output voltage, IOH = −3 mA | VOH | 2.4 | 3.2 | V | IOH = −3 mA | 3 | |
| High-level output voltage, IOH = −48 mA | VOH | 2 | V | VCC = 4.5 V, IOH = −48 mA | 3 | ||
| Low-level output voltage, IOL = 48 mA | VOL | 0.35 | 0.5 | V | VCC = 4.5 V, IOL = 48 mA | 3 | |
| Input clamp voltage | VIK | -1.2 | V | VCC = 4.5 V, II = −18 mA | 3 | ||
| Input current at maximum input voltage | II | 0.1 | mA | VCC = 5.5 V, VI = 7 V | 3 | ||
| High-level input current | IIH | 20 | µA | VCC = 5.5 V, VI = 2.7 V | 3 | ||
| Low-level input current | IIL | -0.5 | mA | VCC = 5.5 V, VI = 0.4 V | 3 | ||
| Short-circuit output current (test-condition value, approx. half IOS) | IO | -50 | -200 | mA | VCC = 5.5 V, VO = 2.25 V | 3 | |
| Supply current, outputs high | ICCH | 3.5 | 5 | mA | VCC = 5.5 V, VI = 0 | 3 | |
| Supply current, outputs low | ICCL | 16 | 27 | mA | VCC = 5.5 V, VI = 4.5 V | 3 | |
| Propagation delay, low-to-high output | tPLH | 1 | 4 | ns | VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX | 4 | |
| Propagation delay, high-to-low output | tPHL | 1 | 4 | ns | VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX | 4 | |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | 3 | |
| High-level input voltage | VIH | 2 | V | 3 | |||
| Low-level input voltage | VIL | 0.8 | V | 3 | |||
| High-level output current | IOH | -48 | mA | 3 | |||
| Low-level output current | IOL | 48 | mA | 3 | |||
| Operating free-air temperature (SN74AS1004A) | TA | 0 | 70 | °C | 3 | ||
| Supply voltage | VCC | 7 | V | 3 | |||
| Input voltage | VI | 7 | V | 3 | |||
| Operating free-air temperature range (SN74AS1004A) | TA | 0 | 70 | °C | 3 | ||
| Storage temperature range | -65 | 150 | °C | 3 |
CAD (KiCad official)
- Symbol:
SN74AS1004AN - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
sn74as1004an-etched.step/sn74as1004an-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74as1004an.step/sn74as1004an.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
c36acc8572a9a015, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74AS1004AN
**Texas Instruments** · Inverters · PDIP-14
SN74AS1004AN from Texas Instruments, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Input of inverter 1 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 2 | 1Y | output | Inverted output of driver 1; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 3 | 2A | input | Input of inverter 2 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 4 | 2Y | output | Inverted output of driver 2; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 5 | 3A | input | Input of inverter 3 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 6 | 3Y | output | Inverted output of driver 3; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 7 | GND | power_in | Ground reference for the device. |
| 8 | 4Y | output | Inverted output of driver 4; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 9 | 4A | input | Input of inverter 4 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 10 | 5Y | output | Inverted output of driver 5; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 11 | 5A | input | Input of inverter 5 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 12 | 6Y | output | Inverted output of driver 6; for the SN74AS1004A, IOH is rated to −48 mA and IOL to 48 mA. |
| 13 | 6A | input | Input of inverter 6 (Y = A); the SN74AS1004A requires VIH of at least 2 V and VIL of at most 0.8 V. |
| 14 | VCC | power_in | Supply voltage: 4.5 V minimum, 5 V nominal, 5.5 V maximum for the SN74AS1004A; absolute maximum is 7 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-14 |
| Category | Logic ICs |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level output voltage, IOH = −3 mA | VOH | 2.4 | 3.2 | | V | IOH = −3 mA | 3 |
| High-level output voltage, IOH = −48 mA | VOH | 2 | | | V | VCC = 4.5 V, IOH = −48 mA | 3 |
| Low-level output voltage, IOL = 48 mA | VOL | | 0.35 | 0.5 | V | VCC = 4.5 V, IOL = 48 mA | 3 |
| Input clamp voltage | VIK | | | -1.2 | V | VCC = 4.5 V, II = −18 mA | 3 |
| Input current at maximum input voltage | II | | | 0.1 | mA | VCC = 5.5 V, VI = 7 V | 3 |
| High-level input current | IIH | | | 20 | µA | VCC = 5.5 V, VI = 2.7 V | 3 |
| Low-level input current | IIL | | | -0.5 | mA | VCC = 5.5 V, VI = 0.4 V | 3 |
| Short-circuit output current (test-condition value, approx. half IOS) | IO | -50 | | -200 | mA | VCC = 5.5 V, VO = 2.25 V | 3 |
| Supply current, outputs high | ICCH | | 3.5 | 5 | mA | VCC = 5.5 V, VI = 0 | 3 |
| Supply current, outputs low | ICCL | | 16 | 27 | mA | VCC = 5.5 V, VI = 4.5 V | 3 |
| Propagation delay, low-to-high output | tPLH | 1 | | 4 | ns | VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX | 4 |
| Propagation delay, high-to-low output | tPHL | 1 | | 4 | ns | VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 500 Ω, TA = MIN to MAX | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | | 3 |
| High-level input voltage | VIH | 2 | | | V | | 3 |
| Low-level input voltage | VIL | | | 0.8 | V | | 3 |
| High-level output current | IOH | | | -48 | mA | | 3 |
| Low-level output current | IOL | | | 48 | mA | | 3 |
| Operating free-air temperature (SN74AS1004A) | TA | 0 | | 70 | °C | | 3 |
| Supply voltage | VCC | | | 7 | V | | 3 |
| Input voltage | VI | | | 7 | V | | 3 |
| Operating free-air temperature range (SN74AS1004A) | TA | 0 | | 70 | °C | | 3 |
| Storage temperature range | | -65 | | 150 | °C | | 3 |
## CAD (KiCad official)
- Symbol: `SN74AS1004AN`
- Footprint: `Package_DIP:DIP-14_W7.62mm`
- 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files: `sn74as1004an-etched.step` / `sn74as1004an-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74as1004an.step` / `sn74as1004an.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74as1004an.pdf) (19 pp, sha256 `c36acc8572a9a015`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74as1004an-datasheet.pdf)