component
SN74ALVC245PWR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74ALVC245PWR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
SN74ALVC245PWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction control input; selects data direction (LOW: B-bus data transfers to A-bus, HIGH: A-bus data transfers to B-bus) |
| 2 | A1 | bidirectional | Data bus A bit 1; bidirectional data line with 3-state output, direction determined by DIR input |
| 3 | A2 | bidirectional | Data bus A bit 2; bidirectional data line with 3-state output, direction determined by DIR input |
| 4 | A3 | bidirectional | Data bus A bit 3; bidirectional data line with 3-state output, direction determined by DIR input |
| 5 | A4 | bidirectional | Data bus A bit 4; bidirectional data line with 3-state output, direction determined by DIR input |
| 6 | A5 | bidirectional | Data bus A bit 5; bidirectional data line with 3-state output, direction determined by DIR input |
| 7 | A6 | bidirectional | Data bus A bit 6; bidirectional data line with 3-state output, direction determined by DIR input |
| 8 | A7 | bidirectional | Data bus A bit 7; bidirectional data line with 3-state output, direction determined by DIR input |
| 9 | A8 | bidirectional | Data bus A bit 8; bidirectional data line with 3-state output, direction determined by DIR input |
| 10 | GND | power_in | Ground |
| 11 | B8 | bidirectional | Data bus B bit 8; bidirectional data line with 3-state output, direction determined by DIR input |
| 12 | B7 | bidirectional | Data bus B bit 7; bidirectional data line with 3-state output, direction determined by DIR input |
| 13 | B6 | bidirectional | Data bus B bit 6; bidirectional data line with 3-state output, direction determined by DIR input |
| 14 | B5 | bidirectional | Data bus B bit 5; bidirectional data line with 3-state output, direction determined by DIR input |
| 15 | B4 | bidirectional | Data bus B bit 4; bidirectional data line with 3-state output, direction determined by DIR input |
| 16 | B3 | bidirectional | Data bus B bit 3; bidirectional data line with 3-state output, direction determined by DIR input |
| 17 | B2 | bidirectional | Data bus B bit 2; bidirectional data line with 3-state output, direction determined by DIR input |
| 18 | B1 | bidirectional | Data bus B bit 1; bidirectional data line with 3-state output, direction determined by DIR input |
| 19 | OE | input | Output enable control input; LOW enables output drivers, HIGH places all outputs in high-impedance state |
| 20 | VCC | power_in | Power supply voltage; operating range 1.65 V to 3.6 V |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74ALVC245PWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74alvc245pwr-etched.step/sn74alvc245pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74alvc245pwr.step/sn74alvc245pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
83dbaf25ff18161a, retrieved 2026-09-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).