Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74ALS641A-1DWR

Texas Instruments · Buffer/Driver/Transceiver · SOIC-20

SN74ALS641A-1DWR from Texas Instruments, in a SOIC-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DIR input Direction-control input: low selects B data to A bus, high selects A data to B bus, per the function table.
2 A1 bidirectional A-bus port 1; data direction is set by DIR and the port is isolated when OE is high.
3 A2 bidirectional A-bus port 2; data direction is set by DIR and the port is isolated when OE is high.
4 A3 bidirectional A-bus port 3; data direction is set by DIR and the port is isolated when OE is high.
5 A4 bidirectional A-bus port 4; data direction is set by DIR and the port is isolated when OE is high.
6 A5 bidirectional A-bus port 5; data direction is set by DIR and the port is isolated when OE is high.
7 A6 bidirectional A-bus port 6; data direction is set by DIR and the port is isolated when OE is high.
8 A7 bidirectional A-bus port 7; data direction is set by DIR and the port is isolated when OE is high.
9 A8 bidirectional A-bus port 8; data direction is set by DIR and the port is isolated when OE is high.
10 GND power_in Ground reference pin for the device.
11 B8 bidirectional B-bus port 8; data direction is set by DIR and the port is isolated when OE is high.
12 B7 bidirectional B-bus port 7; data direction is set by DIR and the port is isolated when OE is high.
13 B6 bidirectional B-bus port 6; data direction is set by DIR and the port is isolated when OE is high.
14 B5 bidirectional B-bus port 5; data direction is set by DIR and the port is isolated when OE is high.
15 B4 bidirectional B-bus port 4; data direction is set by DIR and the port is isolated when OE is high.
16 B3 bidirectional B-bus port 3; data direction is set by DIR and the port is isolated when OE is high.
17 B2 bidirectional B-bus port 2; data direction is set by DIR and the port is isolated when OE is high.
18 B1 bidirectional B-bus port 1; data direction is set by DIR and the port is isolated when OE is high.
19 OE input Output-enable input: when high, the device is disabled and the A and B buses are effectively isolated.
20 VCC power_in Supply voltage pin; recommended supply range is 4.5 V to 5.5 V with a 5 V nominal.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20
Category Logic ICs
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5 5.5 V 3
High-level input voltage VIH 2 V 3
Low-level input voltage VIL 0.8 V 3
High-level output voltage VOH 5.5 V 3
Low-level output current (-1 version) IOL 48 mA -1 version; applies only if VCC is between 4.75 V and 5.25 V 3
Operating free-air temperature TA 0 70 °C 3
Supply voltage VCC 7 V 3
Input voltage, all inputs and I/O ports VI 7 V 3
Operating free-air temperature range TA 0 70 °C 3
Storage temperature range Tstg -65 150 °C 3
Input clamp voltage VIK -1.5 V VCC = 4.5 V, II = −18 mA 4
High-level output current IOH 0.1 mA VCC = 4.5 V, VOH = 5.5 V 4
Low-level output voltage VOL 0.25 0.4 V VCC = 4.5 V, IOL = 12 mA 4
Low-level output voltage VOL 0.35 0.5 V VCC = 4.5 V, IOL = 24 mA 4
Low-level output voltage (-1 version) VOL 0.35 0.5 V VCC = 4.5 V, IOL = 48 mA; applies only to -1 version and only if VCC is between 4.75 V and 5.25 V 4
Input current, control inputs II 0.1 mA VCC = 5.5 V, VI = 7 V 4
High-level input current, control inputs IIH 20 µA VCC = 5.5 V, VI = 2.7 V 4
High-level input current, A or B ports IIH 20 µA VCC = 5.5 V, VI = 2.7 V 4
Low-level input current, control inputs IIL -0.1 mA VCC = 5.5 V, VI = 0.4 V 4
Low-level input current, A or B ports IIL -0.1 mA VCC = 5.5 V, VI = 0.4 V 4
Supply current, outputs high ICC 25 37 mA VCC = 5.5 V, outputs high 4
Supply current, outputs low ICC 33 47 mA VCC = 5.5 V, outputs low 4
Propagation delay, A or B to B or A (low-to-high) tPLH 5 25 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 680 Ω, TA = MIN to MAX 4
Propagation delay, A or B to B or A (high-to-low) tPHL 3 18 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 680 Ω, TA = MIN to MAX 4
Propagation delay, OE to A or B (low-to-high) tPLH 8 30 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 680 Ω, TA = MIN to MAX 4
Propagation delay, OE to A or B (high-to-low) tPHL 8 30 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 680 Ω, TA = MIN to MAX 4
Propagation delay, DIR to A or B (low-to-high) tPLH 8 32 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 680 Ω, TA = MIN to MAX 4
Propagation delay, DIR to A or B (high-to-low) tPHL 8 32 ns VCC = 4.5 V to 5.5 V, CL = 50 pF, RL = 680 Ω, TA = MIN to MAX 4

CAD (KiCad official)

  • Symbol: SN74ALS641A-1DWR
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20 (KiCad packages3D, STEP)
  • 3D model files: sn74als641a-1dwr-etched.step / sn74als641a-1dwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74als641a-1dwr.step / sn74als641a-1dwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (18 pp, sha256 e77d8662f5ac86a7, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF