component
SN74AHCT574DBR
Public Made by Adomby adom
Texas Instruments Flip Flops, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/sn74ahct574dbr
4d0b13f
SN74AHCT574DBR
Texas Instruments · Flip Flops · SSOP-20-208mil
SN74AHCT574DBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Buffered output-enable input; when held low, enables output drivers to normal logic state; when held high (≥2 V), forces all outputs to high-impedance state with leakage current ≤2.5 µA. |
| 2 | 1D | input | First D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 3 | 2D | input | Second D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 4 | 3D | input | Third D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 5 | 4D | input | Fourth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 6 | 5D | input | Fifth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 7 | 6D | input | Sixth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 8 | 7D | input | Seventh D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 9 | 8D | input | Eighth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 10 | GND | power_in | Ground reference pin; device common return path and circuit reference potential. |
| 11 | CLK | input | Clock input; positive-edge triggered to sample all D inputs into their respective flip-flops with minimum pulse duration of 5.5 ns. |
| 12 | 8Q | tri_state | Eighth Q output; outputs the latched data from 8D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 13 | 7Q | tri_state | Seventh Q output; outputs the latched data from 7D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 14 | 6Q | tri_state | Sixth Q output; outputs the latched data from 6D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 15 | 5Q | tri_state | Fifth Q output; outputs the latched data from 5D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 16 | 4Q | tri_state | Fourth Q output; outputs the latched data from 4D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 17 | 3Q | tri_state | Third Q output; outputs the latched data from 3D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 18 | 2Q | tri_state | Second Q output; outputs the latched data from 2D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 19 | 1Q | tri_state | First Q output; outputs the latched data from 1D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 20 | VCC | power_in | Positive power supply pin; operating voltage range 4.5 to 5.5 V with recommended 0.1 µF bypass capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-208mil |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74AHCT574DBR - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
sn74ahct574dbr-etched.step/sn74ahct574dbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ahct574dbr.step/sn74ahct574dbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
ac0f8ea4f52711a1, retrieved 2026-09-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74AHCT574DBR
**Texas Instruments** · Flip Flops · SSOP-20-208mil
SN74AHCT574DBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Buffered output-enable input; when held low, enables output drivers to normal logic state; when held high (≥2 V), forces all outputs to high-impedance state with leakage current ≤2.5 µA. |
| 2 | 1D | input | First D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 3 | 2D | input | Second D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 4 | 3D | input | Third D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 5 | 4D | input | Fourth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 6 | 5D | input | Fifth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 7 | 6D | input | Sixth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 8 | 7D | input | Seventh D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 9 | 8D | input | Eighth D input; data is sampled on positive edge of clock when OE is low, requiring setup time of 3.5 ns before clock edge and hold time of 1.5 ns after clock edge. |
| 10 | GND | power_in | Ground reference pin; device common return path and circuit reference potential. |
| 11 | CLK | input | Clock input; positive-edge triggered to sample all D inputs into their respective flip-flops with minimum pulse duration of 5.5 ns. |
| 12 | 8Q | tri_state | Eighth Q output; outputs the latched data from 8D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 13 | 7Q | tri_state | Seventh Q output; outputs the latched data from 7D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 14 | 6Q | tri_state | Sixth Q output; outputs the latched data from 6D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 15 | 5Q | tri_state | Fifth Q output; outputs the latched data from 5D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 16 | 4Q | tri_state | Fourth Q output; outputs the latched data from 4D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 17 | 3Q | tri_state | Third Q output; outputs the latched data from 3D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 18 | 2Q | tri_state | Second Q output; outputs the latched data from 2D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 19 | 1Q | tri_state | First Q output; outputs the latched data from 1D when OE is low, or high-impedance state (≤2.5 µA leakage) when OE is high; maximum source/sink current ±8 mA. |
| 20 | VCC | power_in | Positive power supply pin; operating voltage range 4.5 to 5.5 V with recommended 0.1 µF bypass capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-208mil |
| Category | Logic |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `SN74AHCT574DBR`
- Footprint: `Package_SO:SSOP-20_5.3x7.2mm_P0.65mm`
- 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files: `sn74ahct574dbr-etched.step` / `sn74ahct574dbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ahct574dbr.step` / `sn74ahct574dbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/sn74ahct574) (41 pp, sha256 `ac0f8ea4f52711a1`, retrieved 2026-09-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74ahct574dbr-datasheet.pdf)