main
Ray
Publish 0.1.0
dd95264
SN74AHC595BQBR
Texas Instruments · Shift Registers · WQFN-16(2.5x3.5)
SN74AHC595BQBR from Texas Instruments, in a WQFN-16(2.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | QB | tri_state | QB 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 2 | QC | tri_state | QC 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 3 | QD | tri_state | QD 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 4 | QE | tri_state | QE 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 5 | QF | tri_state | QF 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 6 | QG | tri_state | QG 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 7 | QH | tri_state | QH 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 8 | GND | power_in | Ground pin. |
| 9 | QH' | output | QH' serial output of the shift register for cascading, which stays active when OE is high (all other outputs go high impedance). |
| 10 | SRCLR | input | Active-low direct overriding clear input of the shift register, with input voltage range 0 to 5.5 V. |
| 11 | SRCLK | input | Shift-register clock input, with input voltage range 0 to 5.5 V. |
| 12 | RCLK | input | Storage-register clock input, with input voltage range 0 to 5.5 V. |
| 13 | OE | input | Active-low output-enable input; when high, all outputs except QH' are in the high-impedance state. |
| 14 | SER | input | Serial data input to the shift register, with input voltage range 0 to 5.5 V. |
| 15 | QA | tri_state | QA 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 16 | VCC | power_in | Power supply pin, operating range 2 V to 5.5 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-16(2.5x3.5) |
| Category | Logic |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 7 | V | 5 | ||
| Input voltage | VI | -0.5 | 7 | V | 5 | ||
| Output voltage | VO | -0.5 | V | max printed as VCC + 0.5 V | 5 | ||
| Input clamp current | IIK | -20 | mA | VI < 0 | 5 | ||
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 5 | |
| Continuous output current | IO | -25 | 25 | mA | VO = 0 to VCC | 5 | |
| Continuous current through VCC or GND | -75 | 75 | mA | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 5 | |
| ESD CDM | V(ESD) | -1000 | 1000 | V | Charged device model, JESD22-C101 | 5 | |
| Supply voltage | VCC | 2 | 5.5 | V | 5 | ||
| High-level input voltage | VIH | 1.5 | V | VCC = 2 V | 5 | ||
| High-level input voltage | VIH | 2.1 | V | VCC = 3 V | 5 | ||
| High-level input voltage | VIH | 3.85 | V | VCC = 5.5 V | 5 | ||
| Low-level input voltage | VIL | 0.5 | V | VCC = 2 V | 5 | ||
| Low-level input voltage | VIL | 0.9 | V | VCC = 3 V | 5 | ||
| Low-level input voltage | VIL | 1.65 | V | VCC = 5.5 V | 5 | ||
| Input voltage | VI | 0 | 5.5 | V | 5 | ||
| Output voltage | VO | 0 | V | max printed as VCC | 5 | ||
| High-level output current | IOH | -50 | µA | VCC = 2 V | 5 | ||
| High-level output current | IOH | -4 | mA | VCC = 3.3 V ± 0.3 V | 5 | ||
| High-level output current | IOH | -8 | mA | VCC = 5 V ± 0.5 V | 5 | ||
| Low-level output current | IOL | 50 | µA | VCC = 2 V | 5 | ||
| Low-level output current | IOL | 4 | mA | VCC = 3.3 V ± 0.3 V | 5 | ||
| Low-level output current | IOL | 8 | mA | VCC = 5 V ± 0.5 V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 100 | ns/V | VCC = 3.3 V ± 0.3 V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 20 | ns/V | VCC = 5 V ± 0.5 V | 5 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 91.8 | °C/W | BQB (WQFN) 16 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 87.7 | °C/W | BQB (WQFN) 16 pins | 6 | ||
| Junction-to-board thermal resistance | RθJB | 61.6 | °C/W | BQB (WQFN) 16 pins | 6 | ||
| Junction-to-top characterization parameter | ψJT | 11.9 | °C/W | BQB (WQFN) 16 pins | 6 | ||
| Junction-to-board characterization parameter | ψJB | 61.4 | °C/W | BQB (WQFN) 16 pins | 6 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 39.4 | °C/W | BQB (WQFN) 16 pins | 6 | ||
| High-level output voltage | VOH | 1.9 | V | IOH = -50 µA, VCC = 2 V, TA = -40°C to 125°C | 6 | ||
| High-level output voltage | VOH | 2.9 | V | IOH = -50 µA, VCC = 3 V, TA = -40°C to 125°C | 6 | ||
| High-level output voltage | VOH | 4.4 | V | IOH = -50 µA, VCC = 4.5 V, TA = -40°C to 125°C | 6 | ||
| High-level output voltage | VOH | 2.48 | V | IOH = -4 mA, VCC = 3 V, TA = -40°C to 125°C | 6 | ||
| High-level output voltage | VOH | 3.8 | V | IOH = -8 mA, VCC = 4.5 V, TA = -40°C to 125°C | 6 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 50 µA, VCC = 2 V, TA = -40°C to 125°C | 6 | ||
| Low-level output voltage | VOL | 0.44 | V | IOL = 4 mA, VCC = 3 V, TA = -40°C to 125°C | 6 | ||
| Input leakage current | II | -1 | 1 | µA | VI = 5.5 V or GND, VCC = 0 V to 5.5 V, TA = -40°C to 125°C | 7 | |
| Off-state output current | IOZ | -2.5 | 2.5 | µA | VI = VCC or GND, VO = VCC or GND, OE = VIH or VIL, QA, QH, VCC = 5.5 V, TA = -40°C to 125°C | 7 | |
| Supply current | ICC | 40 | µA | VI = VCC or GND, IO = 0, VCC = 5.5 V, TA = -40°C to 125°C | 7 | ||
| Input capacitance | Ci | 3 | 10 | pF | VI = VCC or GND, VCC = 5 V, TA = 25°C | 7 | |
| Output capacitance | CO | 5.5 | pF | VO = VCC or GND, TA = 25°C, VCC = 5 V | 7 | ||
| Power dissipation capacitance | Cpd | 25.2 | pF | VCC = 5 V, TA = 25°C, No load, f = 1 MHz | 11 | ||
| Pulse duration SRCLK high or low | tW | 6 | ns | VCC = 3.3 V ± 0.3 V, TA = -40°C to 125°C | 7 | ||
| Setup time SER before SRCLK↑ | tsu | 4.5 | ns | VCC = 3.3 V ± 0.3 V, TA = -40°C to 125°C | 7 | ||
| Hold time SER after SRCLK↑ | th | 2.5 | ns | VCC = 3.3 V ± 0.3 V, TA = -40°C to 125°C | 7 | ||
| Pulse duration SRCLK high or low | tW | 6 | ns | VCC = 5 V ± 0.5 V, TA = -40°C to 125°C | 8 | ||
| Setup time SER before SRCLK↑ | tsu | 4 | ns | VCC = 5 V ± 0.5 V, TA = -40°C to 125°C | 8 | ||
| Hold time SER after SRCLK↑ | th | 3 | ns | VCC = 5 V ± 0.5 V, TA = -40°C to 125°C | 8 | ||
| Maximum clock frequency | fmax | 60 | MHz | VCC = 3.3 V ± 0.3 V, CL = 15 pF, TA = -40°C to 125°C | 8 | ||
| Propagation delay RCLK to QA, QH (tPLH) | tPLH | 1 | 14.9 | ns | VCC = 3.3 V ± 0.3 V, CL = 15 pF, TA = -40°C to 125°C | 8 | |
| Propagation delay RCLK to QA, QH (tPLH) | tPLH | 1 | 8.5 | ns | VCC = 5 V ± 0.5 V, CL = 15 pF, TA = -40°C to 85°C | 10 |
CAD (Adom-generated)
- Symbol:
SN74AHC595BQBR - Footprint:
Adom_Gen:Texas_Instruments_SN74_a984ab - 3D model: generated to fit the land (STEP)
- 3D model files:
sn74ahc595bqbr-etched.step/sn74ahc595bqbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ahc595bqbr.step/sn74ahc595bqbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
36153634a69a8395, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# SN74AHC595BQBR
**Texas Instruments** · Shift Registers · WQFN-16(2.5x3.5)
SN74AHC595BQBR from Texas Instruments, in a WQFN-16(2.5x3.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | QB | tri_state | QB 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 2 | QC | tri_state | QC 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 3 | QD | tri_state | QD 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 4 | QE | tri_state | QE 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 5 | QF | tri_state | QF 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 6 | QG | tri_state | QG 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 7 | QH | tri_state | QH 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 8 | GND | power_in | Ground pin. |
| 9 | QH' | output | QH' serial output of the shift register for cascading, which stays active when OE is high (all other outputs go high impedance). |
| 10 | SRCLR | input | Active-low direct overriding clear input of the shift register, with input voltage range 0 to 5.5 V. |
| 11 | SRCLK | input | Shift-register clock input, with input voltage range 0 to 5.5 V. |
| 12 | RCLK | input | Storage-register clock input, with input voltage range 0 to 5.5 V. |
| 13 | OE | input | Active-low output-enable input; when high, all outputs except QH' are in the high-impedance state. |
| 14 | SER | input | Serial data input to the shift register, with input voltage range 0 to 5.5 V. |
| 15 | QA | tri_state | QA 3-state storage-register output, placed in high impedance when OE is high, with recommended IOH/IOL of ±8 mA at VCC = 5 V ± 0.5 V. |
| 16 | VCC | power_in | Power supply pin, operating range 2 V to 5.5 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-16(2.5x3.5) |
| Category | Logic |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 7 | V | | 5 |
| Input voltage | VI | -0.5 | | 7 | V | | 5 |
| Output voltage | VO | -0.5 | | | V | max printed as VCC + 0.5 V | 5 |
| Input clamp current | IIK | | | -20 | mA | VI < 0 | 5 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VCC | 5 |
| Continuous output current | IO | -25 | | 25 | mA | VO = 0 to VCC | 5 |
| Continuous current through VCC or GND | | -75 | | 75 | mA | | 5 |
| Junction temperature | TJ | | | 150 | °C | | 5 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 5 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | Human body model, ANSI/ESDA/JEDEC JS-001 | 5 |
| ESD CDM | V(ESD) | -1000 | | 1000 | V | Charged device model, JESD22-C101 | 5 |
| Supply voltage | VCC | 2 | | 5.5 | V | | 5 |
| High-level input voltage | VIH | 1.5 | | | V | VCC = 2 V | 5 |
| High-level input voltage | VIH | 2.1 | | | V | VCC = 3 V | 5 |
| High-level input voltage | VIH | 3.85 | | | V | VCC = 5.5 V | 5 |
| Low-level input voltage | VIL | | | 0.5 | V | VCC = 2 V | 5 |
| Low-level input voltage | VIL | | | 0.9 | V | VCC = 3 V | 5 |
| Low-level input voltage | VIL | | | 1.65 | V | VCC = 5.5 V | 5 |
| Input voltage | VI | 0 | | 5.5 | V | | 5 |
| Output voltage | VO | 0 | | | V | max printed as VCC | 5 |
| High-level output current | IOH | | | -50 | µA | VCC = 2 V | 5 |
| High-level output current | IOH | | | -4 | mA | VCC = 3.3 V ± 0.3 V | 5 |
| High-level output current | IOH | | | -8 | mA | VCC = 5 V ± 0.5 V | 5 |
| Low-level output current | IOL | | | 50 | µA | VCC = 2 V | 5 |
| Low-level output current | IOL | | | 4 | mA | VCC = 3.3 V ± 0.3 V | 5 |
| Low-level output current | IOL | | | 8 | mA | VCC = 5 V ± 0.5 V | 5 |
| Input transition rise or fall rate | Δt/Δv | | | 100 | ns/V | VCC = 3.3 V ± 0.3 V | 5 |
| Input transition rise or fall rate | Δt/Δv | | | 20 | ns/V | VCC = 5 V ± 0.5 V | 5 |
| Operating free-air temperature | TA | -40 | | 125 | °C | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 91.8 | | °C/W | BQB (WQFN) 16 pins | 6 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 87.7 | | °C/W | BQB (WQFN) 16 pins | 6 |
| Junction-to-board thermal resistance | RθJB | | 61.6 | | °C/W | BQB (WQFN) 16 pins | 6 |
| Junction-to-top characterization parameter | ψJT | | 11.9 | | °C/W | BQB (WQFN) 16 pins | 6 |
| Junction-to-board characterization parameter | ψJB | | 61.4 | | °C/W | BQB (WQFN) 16 pins | 6 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 39.4 | | °C/W | BQB (WQFN) 16 pins | 6 |
| High-level output voltage | VOH | 1.9 | | | V | IOH = -50 µA, VCC = 2 V, TA = -40°C to 125°C | 6 |
| High-level output voltage | VOH | 2.9 | | | V | IOH = -50 µA, VCC = 3 V, TA = -40°C to 125°C | 6 |
| High-level output voltage | VOH | 4.4 | | | V | IOH = -50 µA, VCC = 4.5 V, TA = -40°C to 125°C | 6 |
| High-level output voltage | VOH | 2.48 | | | V | IOH = -4 mA, VCC = 3 V, TA = -40°C to 125°C | 6 |
| High-level output voltage | VOH | 3.8 | | | V | IOH = -8 mA, VCC = 4.5 V, TA = -40°C to 125°C | 6 |
| Low-level output voltage | VOL | | | 0.1 | V | IOL = 50 µA, VCC = 2 V, TA = -40°C to 125°C | 6 |
| Low-level output voltage | VOL | | | 0.44 | V | IOL = 4 mA, VCC = 3 V, TA = -40°C to 125°C | 6 |
| Input leakage current | II | -1 | | 1 | µA | VI = 5.5 V or GND, VCC = 0 V to 5.5 V, TA = -40°C to 125°C | 7 |
| Off-state output current | IOZ | -2.5 | | 2.5 | µA | VI = VCC or GND, VO = VCC or GND, OE = VIH or VIL, QA, QH, VCC = 5.5 V, TA = -40°C to 125°C | 7 |
| Supply current | ICC | | | 40 | µA | VI = VCC or GND, IO = 0, VCC = 5.5 V, TA = -40°C to 125°C | 7 |
| Input capacitance | Ci | | 3 | 10 | pF | VI = VCC or GND, VCC = 5 V, TA = 25°C | 7 |
| Output capacitance | CO | | 5.5 | | pF | VO = VCC or GND, TA = 25°C, VCC = 5 V | 7 |
| Power dissipation capacitance | Cpd | | 25.2 | | pF | VCC = 5 V, TA = 25°C, No load, f = 1 MHz | 11 |
| Pulse duration SRCLK high or low | tW | 6 | | | ns | VCC = 3.3 V ± 0.3 V, TA = -40°C to 125°C | 7 |
| Setup time SER before SRCLK↑ | tsu | 4.5 | | | ns | VCC = 3.3 V ± 0.3 V, TA = -40°C to 125°C | 7 |
| Hold time SER after SRCLK↑ | th | 2.5 | | | ns | VCC = 3.3 V ± 0.3 V, TA = -40°C to 125°C | 7 |
| Pulse duration SRCLK high or low | tW | 6 | | | ns | VCC = 5 V ± 0.5 V, TA = -40°C to 125°C | 8 |
| Setup time SER before SRCLK↑ | tsu | 4 | | | ns | VCC = 5 V ± 0.5 V, TA = -40°C to 125°C | 8 |
| Hold time SER after SRCLK↑ | th | 3 | | | ns | VCC = 5 V ± 0.5 V, TA = -40°C to 125°C | 8 |
| Maximum clock frequency | fmax | 60 | | | MHz | VCC = 3.3 V ± 0.3 V, CL = 15 pF, TA = -40°C to 125°C | 8 |
| Propagation delay RCLK to QA, QH (tPLH) | tPLH | 1 | | 14.9 | ns | VCC = 3.3 V ± 0.3 V, CL = 15 pF, TA = -40°C to 125°C | 8 |
| Propagation delay RCLK to QA, QH (tPLH) | tPLH | 1 | | 8.5 | ns | VCC = 5 V ± 0.5 V, CL = 15 pF, TA = -40°C to 85°C | 10 |
## CAD (Adom-generated)
- Symbol: `SN74AHC595BQBR`
- Footprint: `Adom_Gen:Texas_Instruments_SN74_a984ab`
- 3D model: generated to fit the land (STEP)
- 3D model files: `sn74ahc595bqbr-etched.step` / `sn74ahc595bqbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ahc595bqbr.step` / `sn74ahc595bqbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74ahc595.pdf) (37 pp, sha256 `36153634a69a8395`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/sn74ahc595bqbr-datasheet.pdf)