component
SN74AHC1G125DC
Public Made by Adomby adom
lingxingic Buffers, Drivers, Receivers, Transceivers, SOT-353. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SN74AHC1G125DC
lingxingic · Buffers, Drivers, Receivers, Transceivers · SOT-353
SN74AHC1G125DC from lingxingic, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input; a high level on OE puts output Y in the high-impedance state, and a low level enables the buffer (A to Y). |
| 2 | A | input | Data input of the non-inverting buffer; recommended input voltage range is 0 V to 5.5 V (absolute maximum -0.5 V to 7.0 V). |
| 3 | GND | power_in | Ground (0 V). |
| 4 | Y | tri_state | Buffered data output with three-state capability; output current is limited to ±25 mA (absolute maximum) and output voltage must stay between 0 V and VCC. |
| 5 | VCC | power_in | Supply voltage; recommended 2.0 V to 5.5 V for SN74AHC1G125 and 4.5 V to 5.5 V for SN74AHCT1G125 (absolute maximum 7.0 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | lingxingic |
| Package | SOT-353 |
| Category | Logic |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (supply voltage) | VCC | -0.5 | 7 | V | 5 | ||
| 输入电压 (input voltage) | VI | -0.5 | 7 | V | 5 | ||
| 输入钳位电流 (input clamp current) | IIK | -20 | mA | VI<-0.5V | 5 | ||
| 输出钳位电流 (output clamp current) | IOK | -20 | 20 | mA | VO<-0.5V或VO>VCC+0.5V | 5 | |
| 输出电流 (output current) | IO | -25 | 25 | mA | 0.5V<VO<VCC+0.5V | 5 | |
| 电源电流 (supply current) | ICC | 75 | mA | 5 | |||
| 地电流 (ground current) | IGND | -75 | mA | 5 | |||
| 贮存温度 (storage temperature) | Tstg | -65 | 150 | ℃ | 5 | ||
| 总功耗 (total power dissipation) | Ptot | 250 | mW | 5 | |||
| 焊接温度 (soldering temperature) | TL | 260 | ℃ | 10秒 | 5 | ||
| 电源电压 (supply voltage) | VCC | 2 | 5 | 5.5 | V | 5 | |
| 输入电压 (input voltage) | VI | 0 | 5.5 | V | 5 | ||
| 输出电压 (output voltage) | VO | 0 | V | 5 | |||
| 工作环境温度 (ambient operating temperature) | Tamb | -40 | 125 | ℃ | 5 | ||
| 输入上升和下降转换速率 (input rise and fall rate) | Δt/ΔV | 100 | ns/V | VCC=3.3V±0.3V | 5 | ||
| 输入上升和下降转换速率 (input rise and fall rate) | Δt/ΔV | 20 | ns/V | VCC=5.0V±0.5V | 5 | ||
| 高电平输入电压 (high-level input voltage) | VIH | 1.5 | V | Tamb=-40℃～+125℃; VCC=2.0V | 8 | ||
| 高电平输入电压 (high-level input voltage) | VIH | 2.1 | V | Tamb=-40℃～+125℃; VCC=3.0V | 8 | ||
| 高电平输入电压 (high-level input voltage) | VIH | 3.85 | V | Tamb=-40℃～+125℃; VCC=5.5V | 8 | ||
| 低电平输入电压 (low-level input voltage) | VIL | 0.5 | V | Tamb=-40℃～+125℃; VCC=2.0V | 8 | ||
| 低电平输入电压 (low-level input voltage) | VIL | 0.9 | V | Tamb=-40℃～+125℃; VCC=3.0V | 8 | ||
| 低电平输入电压 (low-level input voltage) | VIL | 1.65 | V | Tamb=-40℃～+125℃; VCC=5.5V | 8 | ||
| 高电平输出电压 (high-level output voltage) | VOH | 1.9 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-50uA; VCC=2.0V | 8 | ||
| 高电平输出电压 (high-level output voltage) | VOH | 2.9 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-50uA; VCC=3.0V | 8 | ||
| 高电平输出电压 (high-level output voltage) | VOH | 4.4 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-50uA; VCC=4.5V | 8 | ||
| 高电平输出电压 (high-level output voltage) | VOH | 2.4 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-4mA; VCC=3.0V | 8 | ||
| 高电平输出电压 (high-level output voltage) | VOH | 3.7 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-8mA; VCC=4.5V | 8 | ||
| 低电平输出电压 (low-level output voltage) | VOL | 0.1 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=50uA; VCC=2.0V | 8 | ||
| 低电平输出电压 (low-level output voltage) | VOL | 0.55 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=4mA; VCC=3.0V | 8 | ||
| 关断状态输出电流 (off-state output current) | IOZ | 10 | uA | Tamb=-40℃～+125℃; VI=VCC或GND; VCC=5.5V | 8 | ||
| 输入漏电流 (input leakage current) | II | 2 | uA | Tamb=-40℃～+125℃; VI=5.5V或GND; VCC=0V～5.5V | 8 | ||
| 静态电流 (quiescent supply current) | ICC | 40 | uA | Tamb=-40℃～+125℃; VI=VCC或GND; IO=0A; VCC=5.5V | 8 | ||
| 输入电容 (input capacitance) | CI | 10 | pF | Tamb=-40℃～+125℃ | 8 | ||
| 关断状态输出电流 (off-state output current) | IOZ | 1 | uA | Tamb=25℃; VI=VCC或GND; VCC=5.5V | 6 | ||
| 输入漏电流 (input leakage current) | II | 1 | uA | Tamb=25℃; VI=5.5V或GND; VCC=0V～5.5V | 6 | ||
| 静态电流 (quiescent supply current) | ICC | 1 | uA | Tamb=25℃; VI=VCC或GND; IO=0A; VCC=5.5V | 6 | ||
| 传输延时 (propagation delay A to Y) | tpd | 3.4 | 5.5 | ns | Tamb=25℃; VCC=4.5V～5.5V; CL=15pF | 7 | |
| 传输延时 (propagation delay A to Y) | tpd | 1 | 11.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=15pF | 11 | |
| 传输延时 (propagation delay A to Y) | tpd | 1 | 14.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=50pF | 11 | |
| 传输延时 (propagation delay A to Y) | tpd | 1 | 7 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=15pF | 11 | |
| 传输延时 (propagation delay A to Y) | tpd | 1 | 9.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=50pF | 11 | |
| 使能时间 (enable time OE to Y) | ten | 1 | 11.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=15pF | 11 | |
| 使能时间 (enable time OE to Y) | ten | 1 | 14.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=50pF | 11 | |
| 使能时间 (enable time OE to Y) | ten | 1 | 6.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=15pF | 12 | |
| 使能时间 (enable time OE to Y) | ten | 1 | 9.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=50pF | 12 | |
| 失能时间 (disable time OE to Y) | tdis | 1 | 8.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=15pF | 12 | |
| 失能时间 (disable time OE to Y) | tdis | 1 | 11 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=50pF | 12 |
CAD (KiCad official)
- Symbol:
SN74AHC1G125DC - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
sn74ahc1g125dc-etched.step/sn74ahc1g125dc-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ahc1g125dc.step/sn74ahc1g125dc.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: lingxingic datasheet (17 pp, sha256
0bdbeb70b248ec4e, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74AHC1G125DC
**lingxingic** · Buffers, Drivers, Receivers, Transceivers · SOT-353
SN74AHC1G125DC from lingxingic, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Output enable input; a high level on OE puts output Y in the high-impedance state, and a low level enables the buffer (A to Y). |
| 2 | A | input | Data input of the non-inverting buffer; recommended input voltage range is 0 V to 5.5 V (absolute maximum -0.5 V to 7.0 V). |
| 3 | GND | power_in | Ground (0 V). |
| 4 | Y | tri_state | Buffered data output with three-state capability; output current is limited to ±25 mA (absolute maximum) and output voltage must stay between 0 V and VCC. |
| 5 | VCC | power_in | Supply voltage; recommended 2.0 V to 5.5 V for SN74AHC1G125 and 4.5 V to 5.5 V for SN74AHCT1G125 (absolute maximum 7.0 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | lingxingic |
| Package | SOT-353 |
| Category | Logic |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (supply voltage) | VCC | -0.5 | | 7 | V | | 5 |
| 输入电压 (input voltage) | VI | -0.5 | | 7 | V | | 5 |
| 输入钳位电流 (input clamp current) | IIK | -20 | | | mA | VI<-0.5V | 5 |
| 输出钳位电流 (output clamp current) | IOK | -20 | | 20 | mA | VO<-0.5V或VO>VCC+0.5V | 5 |
| 输出电流 (output current) | IO | -25 | | 25 | mA | 0.5V<VO<VCC+0.5V | 5 |
| 电源电流 (supply current) | ICC | | | 75 | mA | | 5 |
| 地电流 (ground current) | IGND | -75 | | | mA | | 5 |
| 贮存温度 (storage temperature) | Tstg | -65 | | 150 | ℃ | | 5 |
| 总功耗 (total power dissipation) | Ptot | | | 250 | mW | | 5 |
| 焊接温度 (soldering temperature) | TL | | | 260 | ℃ | 10秒 | 5 |
| 电源电压 (supply voltage) | VCC | 2 | 5 | 5.5 | V | | 5 |
| 输入电压 (input voltage) | VI | 0 | | 5.5 | V | | 5 |
| 输出电压 (output voltage) | VO | 0 | | | V | | 5 |
| 工作环境温度 (ambient operating temperature) | Tamb | -40 | | 125 | ℃ | | 5 |
| 输入上升和下降转换速率 (input rise and fall rate) | Δt/ΔV | | | 100 | ns/V | VCC=3.3V±0.3V | 5 |
| 输入上升和下降转换速率 (input rise and fall rate) | Δt/ΔV | | | 20 | ns/V | VCC=5.0V±0.5V | 5 |
| 高电平输入电压 (high-level input voltage) | VIH | 1.5 | | | V | Tamb=-40℃～+125℃; VCC=2.0V | 8 |
| 高电平输入电压 (high-level input voltage) | VIH | 2.1 | | | V | Tamb=-40℃～+125℃; VCC=3.0V | 8 |
| 高电平输入电压 (high-level input voltage) | VIH | 3.85 | | | V | Tamb=-40℃～+125℃; VCC=5.5V | 8 |
| 低电平输入电压 (low-level input voltage) | VIL | | | 0.5 | V | Tamb=-40℃～+125℃; VCC=2.0V | 8 |
| 低电平输入电压 (low-level input voltage) | VIL | | | 0.9 | V | Tamb=-40℃～+125℃; VCC=3.0V | 8 |
| 低电平输入电压 (low-level input voltage) | VIL | | | 1.65 | V | Tamb=-40℃～+125℃; VCC=5.5V | 8 |
| 高电平输出电压 (high-level output voltage) | VOH | 1.9 | | | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-50uA; VCC=2.0V | 8 |
| 高电平输出电压 (high-level output voltage) | VOH | 2.9 | | | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-50uA; VCC=3.0V | 8 |
| 高电平输出电压 (high-level output voltage) | VOH | 4.4 | | | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-50uA; VCC=4.5V | 8 |
| 高电平输出电压 (high-level output voltage) | VOH | 2.4 | | | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-4mA; VCC=3.0V | 8 |
| 高电平输出电压 (high-level output voltage) | VOH | 3.7 | | | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=-8mA; VCC=4.5V | 8 |
| 低电平输出电压 (low-level output voltage) | VOL | | | 0.1 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=50uA; VCC=2.0V | 8 |
| 低电平输出电压 (low-level output voltage) | VOL | | | 0.55 | V | Tamb=-40℃～+125℃; VI=VIH或VIL; IO=4mA; VCC=3.0V | 8 |
| 关断状态输出电流 (off-state output current) | IOZ | | | 10 | uA | Tamb=-40℃～+125℃; VI=VCC或GND; VCC=5.5V | 8 |
| 输入漏电流 (input leakage current) | II | | | 2 | uA | Tamb=-40℃～+125℃; VI=5.5V或GND; VCC=0V～5.5V | 8 |
| 静态电流 (quiescent supply current) | ICC | | | 40 | uA | Tamb=-40℃～+125℃; VI=VCC或GND; IO=0A; VCC=5.5V | 8 |
| 输入电容 (input capacitance) | CI | | | 10 | pF | Tamb=-40℃～+125℃ | 8 |
| 关断状态输出电流 (off-state output current) | IOZ | | | 1 | uA | Tamb=25℃; VI=VCC或GND; VCC=5.5V | 6 |
| 输入漏电流 (input leakage current) | II | | | 1 | uA | Tamb=25℃; VI=5.5V或GND; VCC=0V～5.5V | 6 |
| 静态电流 (quiescent supply current) | ICC | | | 1 | uA | Tamb=25℃; VI=VCC或GND; IO=0A; VCC=5.5V | 6 |
| 传输延时 (propagation delay A to Y) | tpd | | 3.4 | 5.5 | ns | Tamb=25℃; VCC=4.5V～5.5V; CL=15pF | 7 |
| 传输延时 (propagation delay A to Y) | tpd | 1 | | 11.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=15pF | 11 |
| 传输延时 (propagation delay A to Y) | tpd | 1 | | 14.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=50pF | 11 |
| 传输延时 (propagation delay A to Y) | tpd | 1 | | 7 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=15pF | 11 |
| 传输延时 (propagation delay A to Y) | tpd | 1 | | 9.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=50pF | 11 |
| 使能时间 (enable time OE to Y) | ten | 1 | | 11.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=15pF | 11 |
| 使能时间 (enable time OE to Y) | ten | 1 | | 14.5 | ns | Tamb=-40℃～+125℃; VCC=3.0V～3.6V; CL=50pF | 11 |
| 使能时间 (enable time OE to Y) | ten | 1 | | 6.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=15pF | 12 |
| 使能时间 (enable time OE to Y) | ten | 1 | | 9.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=50pF | 12 |
| 失能时间 (disable time OE to Y) | tdis | 1 | | 8.5 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=15pF | 12 |
| 失能时间 (disable time OE to Y) | tdis | 1 | | 11 | ns | Tamb=-40℃～+125℃; VCC=4.5V～5.5V; CL=50pF | 12 |
## CAD (KiCad official)
- Symbol: `SN74AHC1G125DC`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files: `sn74ahc1g125dc-etched.step` / `sn74ahc1g125dc-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ahc1g125dc.step` / `sn74ahc1g125dc.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [lingxingic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603362344110481408) (17 pp, sha256 `0bdbeb70b248ec4e`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74ahc1g125dc-datasheet.pdf)