component
SN74AHC05PWR
Public Made by Adomby adom
Texas Instruments Pre-ordered Chips, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74AHC05PWR
Texas Instruments · Pre-ordered Chips · TSSOP-14
SN74AHC05PWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Input of inverter 1 (Y = A); the input voltage range is 0 V to 5.5 V, and unused inputs must be held at VCC or GND. |
| 2 | 1Y | output | Open-drain output of inverter 1 that requires an external pullup resistor; the rated continuous IOL is 4 mA at VCC = 3.3 V and 8 mA at VCC = 5 V. |
| 3 | 2A | input | Input of inverter 2 (Y = A); the input voltage range is 0 V to 5.5 V, and unused inputs must be held at VCC or GND. |
| 4 | 2Y | output | Open-drain output of inverter 2 that requires an external pullup resistor; the rated continuous IOL is 4 mA at VCC = 3.3 V and 8 mA at VCC = 5 V. |
| 5 | 3A | input | Input of inverter 3 (Y = A); the input voltage range is 0 V to 5.5 V, and unused inputs must be held at VCC or GND. |
| 6 | 3Y | output | Open-drain output of inverter 3 that requires an external pullup resistor; the rated continuous IOL is 4 mA at VCC = 3.3 V and 8 mA at VCC = 5 V. |
| 7 | GND | power_in | Ground reference for the device. |
| 8 | 4Y | output | Open-drain output of inverter 4 that requires an external pullup resistor; the rated continuous IOL is 4 mA at VCC = 3.3 V and 8 mA at VCC = 5 V. |
| 9 | 4A | input | Input of inverter 4 (Y = A); the input voltage range is 0 V to 5.5 V, and unused inputs must be held at VCC or GND. |
| 10 | 5Y | output | Open-drain output of inverter 5 that requires an external pullup resistor; the rated continuous IOL is 4 mA at VCC = 3.3 V and 8 mA at VCC = 5 V. |
| 11 | 5A | input | Input of inverter 5 (Y = A); the input voltage range is 0 V to 5.5 V, and unused inputs must be held at VCC or GND. |
| 12 | 6Y | output | Open-drain output of inverter 6 that requires an external pullup resistor; the rated continuous IOL is 4 mA at VCC = 3.3 V and 8 mA at VCC = 5 V. |
| 13 | 6A | input | Input of inverter 6 (Y = A); the input voltage range is 0 V to 5.5 V, and unused inputs must be held at VCC or GND. |
| 14 | VCC | power_in | Supply voltage, 2 V to 5.5 V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Interface ICs |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 2 | ||
| Input voltage range | VI | -0.5 | 7 | V | see Note 1 | 2 | |
| Output voltage range | VO | -0.5 | 7 | V | see Note 1; printed as VCC + 0.5 V | 2 | |
| Input clamp current | IIK | -20 | mA | VI < 0 | 2 | ||
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 2 | |
| Continuous output current | IO | -25 | 25 | mA | VO = 0 to VCC | 2 | |
| Continuous current through VCC or GND | -50 | 50 | mA | 2 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Package thermal impedance | θJA | 113 | °C/W | PW package, see Note 2 | 2 | ||
| Supply voltage | VCC | 2 | 5.5 | V | 3 | ||
| High-level input voltage | VIH | 1.5 | V | VCC = 2 V | 3 | ||
| High-level input voltage | VIH | 2.1 | V | VCC = 3 V | 3 | ||
| High-level input voltage | VIH | 3.85 | V | VCC = 5.5 V | 3 | ||
| Low-level input voltage | VIL | 0.5 | V | VCC = 2 V | 3 | ||
| Low-level input voltage | VIL | 0.9 | V | VCC = 3 V | 3 | ||
| Low-level input voltage | VIL | 1.65 | V | VCC = 5.5 V | 3 | ||
| Input voltage | VI | 0 | 5.5 | V | 3 | ||
| Output voltage | VO | 0 | 5.5 | V | printed as VCC | 3 | |
| Low-level output current | IOL | 50 | µA | VCC = 2 V | 3 | ||
| Low-level output current | IOL | 4 | mA | VCC = 3.3 V ± 0.3 V | 3 | ||
| Low-level output current | IOL | 8 | mA | VCC = 5 V ± 0.5 V | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 100 | ns/V | VCC = 3.3 V ± 0.3 V | 3 | ||
| Input transition rise or fall rate | Δt/Δv | 20 | ns/V | VCC = 5 V ± 0.5 V | 3 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 3 | ||
| Low-level output voltage | VOL | 0.1 | V | IOL = 50 µA, VCC = 2 V | 3 | ||
| Low-level output voltage | VOL | 0.44 | V | IOL = 4 mA, VCC = 3 V | 3 | ||
| Input current | II | -1 | 1 | µA | VI = 5.5 V or GND, VCC = 0 V to 5.5 V | 3 | |
| Supply current | ICC | 20 | µA | VI = VCC or GND, IO = 0, VCC = 5.5 V | 3 | ||
| Input capacitance | Ci | 2.5 | 10 | pF | VI = VCC or GND, VCC = 5 V | 3 | |
| Propagation delay A to Y (tPLZ) | tPLZ | 1 | 2.9 | 8.5 | ns | VCC = 3.3 V ± 0.3 V, CL = 15 pF | 3 |
| Propagation delay A to Y (tPZL) | tPZL | 1 | 4 | 8.5 | ns | VCC = 3.3 V ± 0.3 V, CL = 15 pF | 3 |
| Propagation delay A to Y (tPLZ) | tPLZ | 1 | 4.7 | 12 | ns | VCC = 3.3 V ± 0.3 V, CL = 50 pF | 3 |
| Propagation delay A to Y (tPZL) | tPZL | 1 | 5.8 | 12 | ns | VCC = 3.3 V ± 0.3 V, CL = 50 pF | 3 |
| Propagation delay A to Y (tPLZ) | tPLZ | 1 | 2.2 | 6.5 | ns | VCC = 5 V ± 0.5 V, CL = 15 pF | 4 |
| Propagation delay A to Y (tPZL) | tPZL | 1 | 2.9 | 6.5 | ns | VCC = 5 V ± 0.5 V, CL = 15 pF | 4 |
| Propagation delay A to Y (tPLZ) | tPLZ | 1 | 3.4 | 8.5 | ns | VCC = 5 V ± 0.5 V, CL = 50 pF | 4 |
| Propagation delay A to Y (tPZL) | tPZL | 1 | 4.2 | 8.5 | ns | VCC = 5 V ± 0.5 V, CL = 50 pF | 4 |
| Power dissipation capacitance | Cpd | 3 | pF | No load, f = 1 MHz, VCC = 5 V, TA = 25°C | 4 |
CAD (KiCad official)
- Symbol:
SN74AHC05PWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
sn74ahc05pwr-etched.step/sn74ahc05pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ahc05pwr.step/sn74ahc05pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
64df285810ba22ba, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).