main
History Download
Ray Publish 0.1.0 82b62df

SN74ACT374DWR

Texas Instruments · Flip Flops · SOIC-20-300mil

SN74ACT374DWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Output enable; when high, the eight outputs are placed in the high-impedance state, and it must be tied to VCC through a pullup resistor for a defined high-impedance state at power up or down.
2 1Q output Output 1 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
3 1D input Data input 1, sampled into the flip-flop on the positive transition of CLK.
4 2D input Data input 2, sampled into the flip-flop on the positive transition of CLK.
5 2Q output Output 2 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
6 3Q output Output 3 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
7 3D input Data input 3, sampled into the flip-flop on the positive transition of CLK.
8 4D input Data input 4, sampled into the flip-flop on the positive transition of CLK.
9 4Q output Output 4 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
10 GND power_in Ground pin.
11 CLK input Clock input; on its positive transition the Q outputs take the logic levels set at the D inputs.
12 5Q output Output 5 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
13 5D input Data input 5, sampled into the flip-flop on the positive transition of CLK.
14 6D input Data input 6, sampled into the flip-flop on the positive transition of CLK.
15 6Q output Output 6 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
16 7Q output Output 7 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
17 7D input Data input 7, sampled into the flip-flop on the positive transition of CLK.
18 8D input Data input 8, sampled into the flip-flop on the positive transition of CLK.
19 8Q output Output 8 of the 3-state flip-flop, driven from the stored D-input data and high-impedance when OE is high.
20 VCC power_in Power supply pin; the recommended operating range is 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Logic
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 4.5 5.5 V 4
High-level input voltage VIH 2 V 4
Low-level input voltage VIL 0.8 V 4
Input voltage VI 0 V upper limit printed as VCC 4
Output voltage VO 0 V upper limit printed as VCC 4
High-level output current IOH -24 mA 4
Low-level output current IOL 24 mA 4
Input transition rise or fall rate Δt/Δv 8 ns/V 4
Operating free-air temperature TA -40 85 °C SN74ACT374 4
Supply voltage range VCC -0.5 7 V 4
Input voltage range VI -0.5 V upper limit printed as VCC + 0.5 V 4
Output voltage range VO -0.5 V upper limit printed as VCC + 0.5 V 4
Input clamp current IIK -20 20 mA VI < 0 or VI > VCC 4
Output clamp current IOK -20 20 mA VO < 0 or VO > VCC 4
Continuous output current IO -50 50 mA VO = 0 to VCC 4
Continuous current through VCC or GND -200 200 mA 4
Storage temperature range Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 58 °C/W DW (SOIC) package 5
High-level output voltage VOH 4.4 V IOH = −50μA, VCC = 4.5 V 5
High-level output voltage VOH 5.4 V IOH = −50μA, VCC = 5.5 V 5
High-level output voltage VOH 3.76 V IOH = −24 mA, VCC = 4.5 V 5
High-level output voltage VOH 4.76 V IOH = −24 mA, VCC = 5.5 V 5
Low-level output voltage VOL 0.1 V IOL = 50μA, VCC = 4.5 V 5
Low-level output voltage VOL 0.44 V IOL = 24 mA, VCC = 4.5 V 5
Off-state output current IOZ -2.5 0.25 2.5 μA VO = VCC or GND, VCC = 5.5 V 5
Input current II -1 0.1 1 μA VI = VCC or GND, VCC = 5.5 V 5
Quiescent supply current ICC 4 40 μA VI = VCC or GND, IO = 0, VCC = 5.5 V 5
Supply current increase per input ΔICC 0.6 1.5 mA One input at 3.4 V, other inputs at GND or VCC, VCC = 5.5 V 5
Clock frequency fclock 90 MHz VCC = 5 V ± 0.5 V 6
Pulse duration, CLK high or low tw 5 ns VCC = 5 V ± 0.5 V 6
Setup time, data before CLK↑ tsu 5.5 ns VCC = 5 V ± 0.5 V 6
Hold time, data after CLK↑ th 1.5 ns VCC = 5 V ± 0.5 V 6
Maximum clock frequency fmax 90 MHz VCC = 5 V ± 0.5 V 6
Propagation delay CLK to Q (low-to-high) tPLH 2 11.5 ns VCC = 5 V ± 0.5 V 6
Propagation delay CLK to Q (high-to-low) tPHL 1.5 11 ns VCC = 5 V ± 0.5 V 6
Enable time OE to Q (high) tPZH 1.5 10.5 ns VCC = 5 V ± 0.5 V 6
Enable time OE to Q (low) tPZL 1.5 10.5 ns VCC = 5 V ± 0.5 V 6
Disable time OE to Q (high) tPHZ 1 12.5 ns VCC = 5 V ± 0.5 V 6
Disable time OE to Q (low) tPLZ 1 10 ns VCC = 5 V ± 0.5 V 6

CAD (KiCad official)

  • Symbol: SN74ACT374DWR
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74act374dwr-etched.step / sn74act374dwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74act374dwr.step / sn74act374dwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 dac4ec2aad216035, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF