component
SN74ACT245NSR
Public Made by Adomby adom
Texas Instruments Buffers / Drivers, SO-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
06ac222
SN74ACT245NSR
Texas Instruments · Buffers / Drivers · SO-20-208mil
SN74ACT245NSR from Texas Instruments, in a SO-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction pin for the octal transceiver; the datasheet pin table gives no further limits for it. |
| 2 | A1 | bidirectional | A1 input/output port of the octal bus transceiver. |
| 3 | A2 | bidirectional | A2 input/output port of the octal bus transceiver. |
| 4 | A3 | bidirectional | A3 input/output port of the octal bus transceiver. |
| 5 | A4 | bidirectional | A4 input/output port of the octal bus transceiver. |
| 6 | A5 | bidirectional | A5 input/output port of the octal bus transceiver. |
| 7 | A6 | bidirectional | A6 input/output port of the octal bus transceiver. |
| 8 | A7 | bidirectional | A7 input/output port of the octal bus transceiver. |
| 9 | A8 | bidirectional | A8 input/output port of the octal bus transceiver. |
| 10 | GND | power_in | Ground pin. |
| 11 | B8 | bidirectional | B8 input/output port of the octal bus transceiver. |
| 12 | B7 | bidirectional | B7 input/output port of the octal bus transceiver. |
| 13 | B6 | bidirectional | B6 input/output port of the octal bus transceiver. |
| 14 | B5 | bidirectional | B5 input/output port of the octal bus transceiver. |
| 15 | B4 | bidirectional | B4 input/output port of the octal bus transceiver. |
| 16 | B3 | bidirectional | B3 input/output port of the octal bus transceiver. |
| 17 | B2 | bidirectional | B2 input/output port of the octal bus transceiver. |
| 18 | B1 | bidirectional | B1 input/output port of the octal bus transceiver. |
| 19 | OE | input | Output enable pin; the datasheet pin table gives no further limits for it. |
| 20 | VCC | power_in | Power pin; the recommended supply is 4.5 V to 5.5 V (Section 5.3). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-20-208mil |
| Category | Logic ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5.5 | V | 5 | ||
| High-level input voltage | VIH | 2 | V | 5 | |||
| Low-level input voltage | VIL | 0.8 | V | 5 | |||
| Input voltage | VI | 0 | V | max printed as VCC | 5 | ||
| Output voltage | VO | 0 | V | max printed as VCC | 5 | ||
| High-level output current | IOH | -24 | mA | 5 | |||
| Low-level output current | IOL | 24 | mA | 5 | |||
| Input transition rise or fall rate | Δt/Δv | 8 | ns/V | 5 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | SN74ACT245 column | 5 | |
| Supply voltage | VCC | -0.5 | 7 | V | 5 | ||
| Input voltage | VI | -0.5 | V | max printed as VCC + 0.5 | 5 | ||
| Output voltage | VO | -0.5 | V | max printed as VCC + 0.5 | 5 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 5 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 5 | |
| Continuous output current | IO | -50 | 50 | mA | VO = 0 to VCC | 5 | |
| Continuous current through VCC or GND | -200 | 200 | mA | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| Junction-to-ambient thermal resistance (NS SOP package) | RθJA | 99.7 | °C/W | NS (SOP) package | 5 | ||
| High-level output voltage | VOH | 4.4 | 4.49 | V | IOH = -50 µA; VCC = 4.5 V | 6 | |
| High-level output voltage | VOH | 5.4 | 5.49 | V | IOH = -50 µA; VCC = 5.5 V | 6 | |
| High-level output voltage | VOH | 3.76 | V | IOH = -24 mA; VCC = 4.5 V | 6 | ||
| High-level output voltage | VOH | 4.76 | V | IOH = -24 mA; VCC = 5.5 V | 6 | ||
| Low-level output voltage | VOL | 0.001 | 0.1 | V | IOL = 50 µA; VCC = 4.5 V | 6 | |
| Low-level output voltage | VOL | 0.36 | 0.44 | V | IOL = 24 mA; VCC = 4.5 V | 6 | |
| Off-state output current (A or B ports) | IOZ | -5 | 0.5 | 5 | µA | VO = VCC or GND; VCC = 5.5 V | 6 |
| Input current (OE or DIR) | II | -1 | 0.1 | 1 | µA | VI = VCC or GND; VCC = 5.5 V | 6 |
| Supply current | ICC | 4 | 40 | µA | VI = VCC or GND, IO = 0; VCC = 5.5 V | 6 | |
| Increase in supply current per input | ΔICC | 0.6 | 1.5 | mA | One input at 3.4 V, other inputs at GND or VCC; VCC = 5.5 V | 6 | |
| Propagation delay A or B to B or A (low-to-high) | tPLH | 1.5 | 4 | 8 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Propagation delay A or B to B or A (high-to-low) | tPHL | 1 | 4 | 9 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output enable OE to A or B (low-to-high, Z to H) | tPZH | 1.5 | 5 | 11 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output enable OE to A or B (low-to-high, Z to L) | tPZL | 1.5 | 5.5 | 12 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output disable OE to A or B (high-to-Z) | tPHZ | 1 | 5.5 | 11 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output disable OE to A or B (low-to-Z) | tPLZ | 1.5 | 5 | 11 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
CAD (KiCad official)
- Symbol:
SN74ACT245NSR - Footprint:
Package_SO:SO-20_5.3x12.6mm_P1.27mm - 3D model: SO-20-208mil, generated on the KiCad land (body 5.3 x 12.6 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sn74act245nsr-etched.step/sn74act245nsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74act245nsr.step/sn74act245nsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
fc7eb7952b99e44f, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74ACT245NSR
**Texas Instruments** · Buffers / Drivers · SO-20-208mil
SN74ACT245NSR from Texas Instruments, in a SO-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DIR | input | Direction pin for the octal transceiver; the datasheet pin table gives no further limits for it. |
| 2 | A1 | bidirectional | A1 input/output port of the octal bus transceiver. |
| 3 | A2 | bidirectional | A2 input/output port of the octal bus transceiver. |
| 4 | A3 | bidirectional | A3 input/output port of the octal bus transceiver. |
| 5 | A4 | bidirectional | A4 input/output port of the octal bus transceiver. |
| 6 | A5 | bidirectional | A5 input/output port of the octal bus transceiver. |
| 7 | A6 | bidirectional | A6 input/output port of the octal bus transceiver. |
| 8 | A7 | bidirectional | A7 input/output port of the octal bus transceiver. |
| 9 | A8 | bidirectional | A8 input/output port of the octal bus transceiver. |
| 10 | GND | power_in | Ground pin. |
| 11 | B8 | bidirectional | B8 input/output port of the octal bus transceiver. |
| 12 | B7 | bidirectional | B7 input/output port of the octal bus transceiver. |
| 13 | B6 | bidirectional | B6 input/output port of the octal bus transceiver. |
| 14 | B5 | bidirectional | B5 input/output port of the octal bus transceiver. |
| 15 | B4 | bidirectional | B4 input/output port of the octal bus transceiver. |
| 16 | B3 | bidirectional | B3 input/output port of the octal bus transceiver. |
| 17 | B2 | bidirectional | B2 input/output port of the octal bus transceiver. |
| 18 | B1 | bidirectional | B1 input/output port of the octal bus transceiver. |
| 19 | OE | input | Output enable pin; the datasheet pin table gives no further limits for it. |
| 20 | VCC | power_in | Power pin; the recommended supply is 4.5 V to 5.5 V (Section 5.3). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-20-208mil |
| Category | Logic ICs |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | | 5.5 | V | | 5 |
| High-level input voltage | VIH | 2 | | | V | | 5 |
| Low-level input voltage | VIL | | | 0.8 | V | | 5 |
| Input voltage | VI | 0 | | | V | max printed as VCC | 5 |
| Output voltage | VO | 0 | | | V | max printed as VCC | 5 |
| High-level output current | IOH | -24 | | | mA | | 5 |
| Low-level output current | IOL | | | 24 | mA | | 5 |
| Input transition rise or fall rate | Δt/Δv | | | 8 | ns/V | | 5 |
| Operating free-air temperature | TA | -40 | | 85 | °C | SN74ACT245 column | 5 |
| Supply voltage | VCC | -0.5 | | 7 | V | | 5 |
| Input voltage | VI | -0.5 | | | V | max printed as VCC + 0.5 | 5 |
| Output voltage | VO | -0.5 | | | V | max printed as VCC + 0.5 | 5 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VCC | 5 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VCC | 5 |
| Continuous output current | IO | -50 | | 50 | mA | VO = 0 to VCC | 5 |
| Continuous current through VCC or GND | | -200 | | 200 | mA | | 5 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 5 |
| Junction-to-ambient thermal resistance (NS SOP package) | RθJA | | 99.7 | | °C/W | NS (SOP) package | 5 |
| High-level output voltage | VOH | 4.4 | 4.49 | | V | IOH = -50 µA; VCC = 4.5 V | 6 |
| High-level output voltage | VOH | 5.4 | 5.49 | | V | IOH = -50 µA; VCC = 5.5 V | 6 |
| High-level output voltage | VOH | 3.76 | | | V | IOH = -24 mA; VCC = 4.5 V | 6 |
| High-level output voltage | VOH | 4.76 | | | V | IOH = -24 mA; VCC = 5.5 V | 6 |
| Low-level output voltage | VOL | | 0.001 | 0.1 | V | IOL = 50 µA; VCC = 4.5 V | 6 |
| Low-level output voltage | VOL | | 0.36 | 0.44 | V | IOL = 24 mA; VCC = 4.5 V | 6 |
| Off-state output current (A or B ports) | IOZ | -5 | 0.5 | 5 | µA | VO = VCC or GND; VCC = 5.5 V | 6 |
| Input current (OE or DIR) | II | -1 | 0.1 | 1 | µA | VI = VCC or GND; VCC = 5.5 V | 6 |
| Supply current | ICC | | 4 | 40 | µA | VI = VCC or GND, IO = 0; VCC = 5.5 V | 6 |
| Increase in supply current per input | ΔICC | | 0.6 | 1.5 | mA | One input at 3.4 V, other inputs at GND or VCC; VCC = 5.5 V | 6 |
| Propagation delay A or B to B or A (low-to-high) | tPLH | 1.5 | 4 | 8 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Propagation delay A or B to B or A (high-to-low) | tPHL | 1 | 4 | 9 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output enable OE to A or B (low-to-high, Z to H) | tPZH | 1.5 | 5 | 11 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output enable OE to A or B (low-to-high, Z to L) | tPZL | 1.5 | 5.5 | 12 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output disable OE to A or B (high-to-Z) | tPHZ | 1 | 5.5 | 11 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
| Output disable OE to A or B (low-to-Z) | tPLZ | 1.5 | 5 | 11 | ns | VCC = 5 V ± 0.5 V; see Figure 6-1 | 6 |
## CAD (KiCad official)
- Symbol: `SN74ACT245NSR`
- Footprint: `Package_SO:SO-20_5.3x12.6mm_P1.27mm`
- 3D model: SO-20-208mil, generated on the KiCad land (body 5.3 x 12.6 mm, terminals on the pads, 1.75 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sn74act245nsr-etched.step` / `sn74act245nsr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74act245nsr.step` / `sn74act245nsr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74act245.pdf) (41 pp, sha256 `fc7eb7952b99e44f`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74act245nsr-datasheet.pdf)