main
Ray
Publish 0.1.0
d1bd9a1
SN74ACT244IPWRQ1
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
SN74ACT244IPWRQ1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Output Enable 1 (active low): when low, the 1Y outputs pass noninverted data from the 1A inputs; when high, the 1Y outputs go to high impedance. |
| 2 | 1A1 | input | Data input 1A1 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 3 | 2Y4 | output | Buffer output 2Y4 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 4 | 1A2 | input | Data input 1A2 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 5 | 2Y3 | output | Buffer output 2Y3 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 6 | 1A3 | input | Data input 1A3 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 7 | 2Y2 | output | Buffer output 2Y2 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 8 | 1A4 | input | Data input 1A4 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 9 | 2Y1 | output | Buffer output 2Y1 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 10 | GND | power_in | Ground pin for the device. |
| 11 | 2A1 | input | Data input 2A1 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 12 | 1Y4 | output | Buffer output 1Y4 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 13 | 2A2 | input | Data input 2A2 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 14 | 1Y3 | output | Buffer output 1Y3 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 15 | 2A3 | input | Data input 2A3 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 16 | 1Y2 | output | Buffer output 1Y2 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 17 | 2A4 | input | Data input 2A4 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 18 | 1Y1 | output | Buffer output 1Y1 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 19 | 2OE | input | Output Enable 2 (active low): when low, the 2Y outputs pass noninverted data from the 2A inputs; when high, the 2Y outputs go to high impedance. |
| 20 | VCC | power_in | Supply pin; operates from 4.5 V to 5.5 V per the recommended operating conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Input voltage range | VI | -0.5 | V | 4 | |||
| Output voltage range | VO | -0.5 | V | 4 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 4 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 4 | |
| Continuous output current | IO | -50 | 50 | mA | VO = 0 to VCC | 4 | |
| Continuous current through VCC or GND | -200 | 200 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 4 | ||
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| Input voltage | VI | 0 | V | 4 | |||
| Output voltage | VO | 0 | V | 4 | |||
| High-level output current | IOH | -24 | mA | 4 | |||
| Low-level output current | IOL | 24 | mA | 4 | |||
| Input transition rise or fall rate | Δt/Δv | 8 | ns/V | 4 | |||
| Operating free-air temperature (SN74ACT244I grade) | TA | -40 | 85 | °C | SN74ACT244I row (I grade) | 4 | |
| High-level output voltage | VOH | 4.4 | 4.49 | V | IOH = −50 µA, VCC = 4.5 V | 5 | |
| High-level output voltage | VOH | 5.4 | 5.49 | V | IOH = −50 µA, VCC = 5.5 V | 5 | |
| High-level output voltage | VOH | 3.76 | V | IOH = −24 mA, VCC = 4.5 V | 5 | ||
| High-level output voltage | VOH | 4.76 | V | IOH = −24 mA, VCC = 5.5 V | 5 | ||
| High-level output voltage | VOH | 3.85 | V | IOH = −75 mA (note 1), VCC = 5.5 V | 5 | ||
| Low-level output voltage | VOL | 0.001 | 0.1 | V | IOL = 50 µA, VCC = 4.5 V | 5 | |
| Low-level output voltage | VOL | 0.44 | V | IOL = 24 mA, VCC = 4.5 V | 5 | ||
| Low-level output voltage | VOL | 1.65 | V | IOL = 75 mA (note 1), VCC = 5.5 V | 5 | ||
| Off-state (high-impedance) output current | IOZ | -2.5 | 0.25 | 2.5 | µA | VO = VCC or GND, VCC = 5.5 V | 5 |
| Input current | II | -1 | 0.1 | 1 | µA | VI = VCC or GND, VCC = 5.5 V | 5 |
| Supply current | ICC | 4 | 40 | µA | VI = VCC or GND, IO = 0, VCC = 5.5 V | 5 | |
| Supply current increase per input at TTL level | ΔICC | 0.6 | 1.5 | mA | One input at 3.4 V, other inputs at GND or VCC, VCC = 5.5 V | 5 | |
| Propagation delay low-to-high | tPLH | 1.5 | 6.5 | 10 | ns | A to Y, VCC = 5 V ± 0.5 V | 5 |
| Propagation delay high-to-low | tPHL | 1.5 | 7 | 10 | ns | A to Y, VCC = 5 V ± 0.5 V | 5 |
| Output enable time to high | tPZH | 1 | 7 | 9.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Output enable time to low | tPZL | 1.5 | 7 | 10.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Output disable time from high | tPHZ | 1.5 | 8 | 10.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Output disable time from low | tPLZ | 2 | 7.5 | 10.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Junction-to-ambient thermal resistance (PW, TSSOP 20-pin) | RθJA | 126.2 | °C/W | PW (TSSOP) 20-pin package | 4 |
CAD (KiCad official)
- Symbol:
SN74ACT244IPWRQ1 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sn74act244ipwrq1-etched.step/sn74act244ipwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74act244ipwrq1.step/sn74act244ipwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
c7582478e1421eb1, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74ACT244IPWRQ1
**Texas Instruments** · Buffers, Drivers, Receivers, Transceivers · TSSOP-20
SN74ACT244IPWRQ1 from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Output Enable 1 (active low): when low, the 1Y outputs pass noninverted data from the 1A inputs; when high, the 1Y outputs go to high impedance. |
| 2 | 1A1 | input | Data input 1A1 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 3 | 2Y4 | output | Buffer output 2Y4 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 4 | 1A2 | input | Data input 1A2 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 5 | 2Y3 | output | Buffer output 2Y3 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 6 | 1A3 | input | Data input 1A3 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 7 | 2Y2 | output | Buffer output 2Y2 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 8 | 1A4 | input | Data input 1A4 of buffer 1; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 9 | 2Y1 | output | Buffer output 2Y1 of the second 4-bit buffer; it is a 3-state output that is high-impedance when 2OE is high. |
| 10 | GND | power_in | Ground pin for the device. |
| 11 | 2A1 | input | Data input 2A1 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 12 | 1Y4 | output | Buffer output 1Y4 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 13 | 2A2 | input | Data input 2A2 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 14 | 1Y3 | output | Buffer output 1Y3 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 15 | 2A3 | input | Data input 2A3 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 16 | 1Y2 | output | Buffer output 1Y2 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 17 | 2A4 | input | Data input 2A4 of buffer 2; inputs are TTL-compatible and accept voltages up to 5.5 V. |
| 18 | 1Y1 | output | Buffer output 1Y1 of the first 4-bit buffer; it is a 3-state output that is high-impedance when 1OE is high. |
| 19 | 2OE | input | Output Enable 2 (active low): when low, the 2Y outputs pass noninverted data from the 2A inputs; when high, the 2Y outputs go to high impedance. |
| 20 | VCC | power_in | Supply pin; operates from 4.5 V to 5.5 V per the recommended operating conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Logic |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | | 7 | V | | 4 |
| Input voltage range | VI | -0.5 | | | V | | 4 |
| Output voltage range | VO | -0.5 | | | V | | 4 |
| Input clamp current | IIK | -20 | | 20 | mA | VI < 0 or VI > VCC | 4 |
| Output clamp current | IOK | -20 | | 20 | mA | VO < 0 or VO > VCC | 4 |
| Continuous output current | IO | -50 | | 50 | mA | VO = 0 to VCC | 4 |
| Continuous current through VCC or GND | | -200 | | 200 | mA | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | VCC | 4.5 | | 5.5 | V | | 4 |
| High-level input voltage | VIH | 2 | | | V | | 4 |
| Low-level input voltage | VIL | | | 0.8 | V | | 4 |
| Input voltage | VI | 0 | | | V | | 4 |
| Output voltage | VO | 0 | | | V | | 4 |
| High-level output current | IOH | | | -24 | mA | | 4 |
| Low-level output current | IOL | | | 24 | mA | | 4 |
| Input transition rise or fall rate | Δt/Δv | | | 8 | ns/V | | 4 |
| Operating free-air temperature (SN74ACT244I grade) | TA | -40 | | 85 | °C | SN74ACT244I row (I grade) | 4 |
| High-level output voltage | VOH | 4.4 | 4.49 | | V | IOH = −50 µA, VCC = 4.5 V | 5 |
| High-level output voltage | VOH | 5.4 | 5.49 | | V | IOH = −50 µA, VCC = 5.5 V | 5 |
| High-level output voltage | VOH | 3.76 | | | V | IOH = −24 mA, VCC = 4.5 V | 5 |
| High-level output voltage | VOH | 4.76 | | | V | IOH = −24 mA, VCC = 5.5 V | 5 |
| High-level output voltage | VOH | 3.85 | | | V | IOH = −75 mA (note 1), VCC = 5.5 V | 5 |
| Low-level output voltage | VOL | | 0.001 | 0.1 | V | IOL = 50 µA, VCC = 4.5 V | 5 |
| Low-level output voltage | VOL | | | 0.44 | V | IOL = 24 mA, VCC = 4.5 V | 5 |
| Low-level output voltage | VOL | | | 1.65 | V | IOL = 75 mA (note 1), VCC = 5.5 V | 5 |
| Off-state (high-impedance) output current | IOZ | -2.5 | 0.25 | 2.5 | µA | VO = VCC or GND, VCC = 5.5 V | 5 |
| Input current | II | -1 | 0.1 | 1 | µA | VI = VCC or GND, VCC = 5.5 V | 5 |
| Supply current | ICC | | 4 | 40 | µA | VI = VCC or GND, IO = 0, VCC = 5.5 V | 5 |
| Supply current increase per input at TTL level | ΔICC | | 0.6 | 1.5 | mA | One input at 3.4 V, other inputs at GND or VCC, VCC = 5.5 V | 5 |
| Propagation delay low-to-high | tPLH | 1.5 | 6.5 | 10 | ns | A to Y, VCC = 5 V ± 0.5 V | 5 |
| Propagation delay high-to-low | tPHL | 1.5 | 7 | 10 | ns | A to Y, VCC = 5 V ± 0.5 V | 5 |
| Output enable time to high | tPZH | 1 | 7 | 9.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Output enable time to low | tPZL | 1.5 | 7 | 10.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Output disable time from high | tPHZ | 1.5 | 8 | 10.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Output disable time from low | tPLZ | 2 | 7.5 | 10.5 | ns | OE to Y, VCC = 5 V ± 0.5 V | 5 |
| Junction-to-ambient thermal resistance (PW, TSSOP 20-pin) | RθJA | | 126.2 | | °C/W | PW (TSSOP) 20-pin package | 4 |
## CAD (KiCad official)
- Symbol: `SN74ACT244IPWRQ1`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `sn74act244ipwrq1-etched.step` / `sn74act244ipwrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74act244ipwrq1.step` / `sn74act244ipwrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74act244-q1.pdf) (22 pp, sha256 `c7582478e1421eb1`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74act244ipwrq1-datasheet.pdf)