main
Ray
Initial commit: component/sn74ac74dr
349e946
SN74AC74DR
Texas Instruments · Flip Flops · SOIC-14
SN74AC74DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 CLR | input | Channel 1 Clear input (active low); asynchronous reset that forces 1Q to low when held low, independent of clock input. |
| 2 | 1D | input | Channel 1 Data input; state sampled on rising clock edge, requires minimum 3 ns setup time before clock transition. |
| 3 | 1CLK | input | Channel 1 Clock input; positive edge triggered, captures 1D state on rising clock edge with max 10 ns propagation delay. |
| 4 | 1 PRE | input | Channel 1 Preset input (active low); asynchronous set that forces 1Q to high when held low, independent of clock input. |
| 5 | 1Q | output | Channel 1 non-inverted Q output; logical state of flip-flop that can source/sink ±24 mA at 4.5V supply. |
| 6 | 1 Q | output | Channel 1 inverted Q output (Q-bar complement); logical inverse of 1Q that can source/sink ±24 mA at 4.5V supply. |
| 7 | GND | power_in | Ground reference potential (0V); required current return path for all logic circuits and output drivers. |
| 8 | 2 Q | output | Channel 2 inverted Q output (Q-bar complement); logical inverse of 2Q that can source/sink ±24 mA at 4.5V supply. |
| 9 | 2Q | output | Channel 2 non-inverted Q output; logical state of flip-flop that can source/sink ±24 mA at 4.5V supply. |
| 10 | 2 PRE | input | Channel 2 Preset input (active low); asynchronous set that forces 2Q to high when held low, independent of clock input. |
| 11 | 2CLK | input | Channel 2 Clock input; positive edge triggered, captures 2D state on rising clock edge with max 10 ns propagation delay. |
| 12 | 2D | input | Channel 2 Data input; state sampled on rising clock edge, requires minimum 3 ns setup time before clock transition. |
| 13 | 2 CLR | input | Channel 2 Clear input (active low); asynchronous reset that forces 2Q to low when held low, independent of clock input. |
| 14 | VCC | power_in | Positive supply voltage (2V to 6V range); requires 0.1 µF bypass capacitor per power supply recommendations section 8.3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Logic |
| Pins | 14 |
CAD (KiCad official)
- Symbol:
SN74AC74DR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
sn74ac74dr-etched.step/sn74ac74dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ac74dr.step/sn74ac74dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
be2357defe00c911, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74AC74DR
**Texas Instruments** · Flip Flops · SOIC-14
SN74AC74DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 CLR | input | Channel 1 Clear input (active low); asynchronous reset that forces 1Q to low when held low, independent of clock input. |
| 2 | 1D | input | Channel 1 Data input; state sampled on rising clock edge, requires minimum 3 ns setup time before clock transition. |
| 3 | 1CLK | input | Channel 1 Clock input; positive edge triggered, captures 1D state on rising clock edge with max 10 ns propagation delay. |
| 4 | 1 PRE | input | Channel 1 Preset input (active low); asynchronous set that forces 1Q to high when held low, independent of clock input. |
| 5 | 1Q | output | Channel 1 non-inverted Q output; logical state of flip-flop that can source/sink ±24 mA at 4.5V supply. |
| 6 | 1 Q | output | Channel 1 inverted Q output (Q-bar complement); logical inverse of 1Q that can source/sink ±24 mA at 4.5V supply. |
| 7 | GND | power_in | Ground reference potential (0V); required current return path for all logic circuits and output drivers. |
| 8 | 2 Q | output | Channel 2 inverted Q output (Q-bar complement); logical inverse of 2Q that can source/sink ±24 mA at 4.5V supply. |
| 9 | 2Q | output | Channel 2 non-inverted Q output; logical state of flip-flop that can source/sink ±24 mA at 4.5V supply. |
| 10 | 2 PRE | input | Channel 2 Preset input (active low); asynchronous set that forces 2Q to high when held low, independent of clock input. |
| 11 | 2CLK | input | Channel 2 Clock input; positive edge triggered, captures 2D state on rising clock edge with max 10 ns propagation delay. |
| 12 | 2D | input | Channel 2 Data input; state sampled on rising clock edge, requires minimum 3 ns setup time before clock transition. |
| 13 | 2 CLR | input | Channel 2 Clear input (active low); asynchronous reset that forces 2Q to low when held low, independent of clock input. |
| 14 | VCC | power_in | Positive supply voltage (2V to 6V range); requires 0.1 µF bypass capacitor per power supply recommendations section 8.3. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Logic |
| Pins | 14 |
## CAD (KiCad official)
- Symbol: `SN74AC74DR`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `sn74ac74dr-etched.step` / `sn74ac74dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74ac74dr.step` / `sn74ac74dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74ac74.pdf) (45 pp, sha256 `be2357defe00c911`, retrieved 2026-09-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74ac74dr-datasheet.pdf)