SN74AC373N

{
  "schema_version": 1,
  "type": "component",
  "slug": "sn74ac373n",
  "title": "SN74AC373N",
  "brief": "Texas Instruments Latches, PDIP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "logic",
    "sn74ac373n",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "SN74AC373N",
    "manufacturer": "Texas Instruments",
    "package": "PDIP-20",
    "pin_count": 20,
    "category": "Logic",
    "subcategory": "Latches",
    "datasheet": "https://www.ti.com/cn/lit/gpn/sn74ac373",
    "parts": {
      "symbol": "sn74ac373n.kicad_sym",
      "footprint": "sn74ac373n.kicad_mod",
      "model_3d": "sn74ac373n-hero.glb",
      "model_3d_plain": "sn74ac373n-etched.glb",
      "model_3d_step": "sn74ac373n-etched.step",
      "model_3d_step_plain": "sn74ac373n.step",
      "lbr": "sn74ac373n.lbr"
    },
    "distributor_links": {
      "lcsc": "C1523288",
      "digikey": "296-26376-5-ND",
      "mouser": "595-SN74AC373N"
    },
    "distributor_check": {
      "checked_at": "2026-10-16T00:49:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-26376-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-SN74AC373N",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OE",
        "type": "input",
        "description": "Output enable: when OE is high the eight Q outputs go to the high-impedance state, and OE must be tied to VCC through a pullup resistor for the specified high-impedance state during power up or power down."
      },
      {
        "number": "2",
        "name": "1Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 1, which follows 1D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "3",
        "name": "1D",
        "type": "input",
        "description": "Data input to latch 1, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "4",
        "name": "2D",
        "type": "input",
        "description": "Data input to latch 2, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "5",
        "name": "2Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 2, which follows 2D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "6",
        "name": "3Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 3, which follows 3D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "7",
        "name": "3D",
        "type": "input",
        "description": "Data input to latch 3, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "8",
        "name": "4D",
        "type": "input",
        "description": "Data input to latch 4, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "9",
        "name": "4Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 4, which follows 4D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "10",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "11",
        "name": "LE",
        "type": "input",
        "description": "Latch enable: when LE is high the Q outputs follow the D inputs, and when LE is taken low the Q outputs latch the logic levels present at the D inputs."
      },
      {
        "number": "12",
        "name": "5Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 5, which follows 5D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "13",
        "name": "5D",
        "type": "input",
        "description": "Data input to latch 5, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "14",
        "name": "6D",
        "type": "input",
        "description": "Data input to latch 6, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "15",
        "name": "6Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 6, which follows 6D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "16",
        "name": "7Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 7, which follows 7D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "17",
        "name": "7D",
        "type": "input",
        "description": "Data input to latch 7, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "18",
        "name": "8D",
        "type": "input",
        "description": "Data input to latch 8, which is sampled while LE is high and must meet the setup and hold times referenced to the falling edge of LE."
      },
      {
        "number": "19",
        "name": "8Q",
        "type": "tri_state",
        "description": "Three-state noninverting latch output 8, which follows 8D while LE is high and holds its latched level when LE goes low."
      },
      {
        "number": "20",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; the recommended supply range is 2 V to 6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table (Table 3-1) column header lists SSOP, TVSOP, SOIC, SO, TSSOP and VQFN, not PDIP by nam; The datasheet's thermal pad row (VQFN column) was excluded because the PDIP-20 package has no therma; Q outputs are typed as tri_state because the datasheet describes them as three-state outputs; the pi"
        ],
        "pages_sent": 32,
        "cost_usd": 0.0913,
        "at": "2026-10-16T00:48:46"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/sn74ac373",
        "pages": 32,
        "sha256": "bcc4551bd99a97ba",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn74ac373n.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          26.162,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ca359c9b9e0ce94efcb6c96866513f659eef6517d629ace3c4a0a779f6fd57bb",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn74ac373n-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          26.162,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "629d273bd2d46bb836864657fe0129ebf87d1072d860d19c7f99ef84e7fe4d4e",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "PDIP-20",
      "Category": "Logic",
      "Pins": "20"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "bcc4551bd99a97ba86c27345800127b4dab8829a9c7ed55b12daf671e2b5f0f2",
      "rows": [
        {
          "name": "High-level output voltage (IOH = -50 μA)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.9,
          "typ": null,
          "max": null,
          "conditions": "IOH = -50 μA, VCC = 3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "High-level output voltage (IOH = -50 μA)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 4.4,
          "typ": null,
          "max": null,
          "conditions": "IOH = -50 μA, VCC = 4.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "High-level output voltage (IOH = -50 μA)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 5.4,
          "typ": null,
          "max": null,
          "conditions": "IOH = -50 μA, VCC = 5.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "High-level output voltage (IOH = -12 mA)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 2.46,
          "typ": null,
          "max": null,
          "conditions": "IOH = -12 mA, VCC = 3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "High-level output voltage (IOH = -24 mA)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 3.76,
          "typ": null,
          "max": null,
          "conditions": "IOH = -24 mA, VCC = 4.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "High-level output voltage (IOH = -24 mA)",
          "symbol": "VOH",
          "kind": "electrical",
          "unit": "V",
          "min": 4.76,
          "typ": null,
          "max": null,
          "conditions": "IOH = -24 mA, VCC = 5.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Low-level output voltage (IOL = 50 μA)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.1,
          "conditions": "IOL = 50 μA, VCC = 3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Low-level output voltage (IOL = 12 mA)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.44,
          "conditions": "IOL = 12 mA, VCC = 3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Low-level output voltage (IOL = 24 mA)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.44,
          "conditions": "IOL = 24 mA, VCC = 4.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Input current",
          "symbol": "II",
          "kind": "electrical",
          "unit": "μA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "VI = VCC or GND, VCC = 5.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Off-state (high-impedance) output current",
          "symbol": "IOZ",
          "kind": "electrical",
          "unit": "μA",
          "min": -2.5,
          "typ": null,
          "max": 2.5,
          "conditions": "VO = VCC or GND, VCC = 5.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": null,
          "max": 40,
          "conditions": "VI = VCC or GND, IO = 0, VCC = 5.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Pulse duration, LE high",
          "symbol": "tw",
          "kind": "timing",
          "unit": "ns",
          "min": 6,
          "typ": null,
          "max": null,
          "conditions": "VCC = 3.3 V ± 0.3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Setup time, data before LE↓",
          "symbol": "tsu",
          "kind": "timing",
          "unit": "ns",
          "min": 6,
          "typ": null,
          "max": null,
          "conditions": "VCC = 3.3 V ± 0.3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Hold time, data after LE↓",
          "symbol": "th",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": null,
          "max": null,
          "conditions": "VCC = 3.3 V ± 0.3 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Pulse duration, LE high",
          "symbol": "tw",
          "kind": "timing",
          "unit": "ns",
          "min": 4.5,
          "typ": null,
          "max": null,
          "conditions": "VCC = 5 V ± 0.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Setup time, data before LE↓",
          "symbol": "tsu",
          "kind": "timing",
          "unit": "ns",
          "min": 4.5,
          "typ": null,
          "max": null,
          "conditions": "VCC = 5 V ± 0.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay low-to-high, D to Q",
          "symbol": "tPLH",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 10,
          "max": 15,
          "conditions": "D to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay high-to-low, D to Q",
          "symbol": "tPHL",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 9.5,
          "max": 14.5,
          "conditions": "D to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay low-to-high, LE to Q",
          "symbol": "tPLH",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 10,
          "max": 15,
          "conditions": "LE to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay high-to-low, LE to Q",
          "symbol": "tPHL",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 9.5,
          "max": 14,
          "conditions": "LE to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output enable time high, OE to Q",
          "symbol": "tPZH",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 9,
          "max": 13,
          "conditions": "OE to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output enable time low, OE to Q",
          "symbol": "tPZL",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 8.5,
          "max": 13,
          "conditions": "OE to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output disable time high, OE to Q",
          "symbol": "tPHZ",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 10,
          "max": 14.5,
          "conditions": "OE to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output disable time low, OE to Q",
          "symbol": "tPLZ",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 8,
          "max": 12.5,
          "conditions": "OE to Q, VCC = 3.3 V ± 0.3 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay low-to-high, D to Q",
          "symbol": "tPLH",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 7,
          "max": 10.5,
          "conditions": "D to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay high-to-low, D to Q",
          "symbol": "tPHL",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 7,
          "max": 10.5,
          "conditions": "D to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay low-to-high, LE to Q",
          "symbol": "tPLH",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 7.5,
          "max": 10.5,
          "conditions": "LE to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay high-to-low, LE to Q",
          "symbol": "tPHL",
          "kind": "timing",
          "unit": "ns",
          "min": 1.5,
          "typ": 7,
          "max": 10.5,
          "conditions": "LE to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output enable time high, OE to Q",
          "symbol": "tPZH",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 7,
          "max": 9.5,
          "conditions": "OE to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output enable time low, OE to Q",
          "symbol": "tPZL",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 6.5,
          "max": 9.5,
          "conditions": "OE to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output disable time high, OE to Q",
          "symbol": "tPHZ",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 8,
          "max": 12.5,
          "conditions": "OE to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Output disable time low, OE to Q",
          "symbol": "tPLZ",
          "kind": "timing",
          "unit": "ns",
          "min": 1,
          "typ": 6.5,
          "max": 10,
          "conditions": "OE to Q, VCC = 5 V ± 0.5 V",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "High-level input voltage",
          "symbol": "VIH",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.1,
          "typ": null,
          "max": null,
          "conditions": "VCC = 3 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "High-level input voltage",
          "symbol": "VIH",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3.15,
          "typ": null,
          "max": null,
          "conditions": "VCC = 4.5 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "High-level input voltage",
          "symbol": "VIH",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 3.85,
          "typ": null,
          "max": null,
          "conditions": "VCC = 5.5 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Low-level input voltage",
          "symbol": "VIL",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.9,
          "conditions": "VCC = 3 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Low-level input voltage",
          "symbol": "VIL",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1.35,
          "conditions": "VCC = 4.5 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Low-level input voltage",
          "symbol": "VIL",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1.65,
          "conditions": "VCC = 5.5 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input voltage",
          "symbol": "VI",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0,
          "typ": null,
          "max": null,
          "conditions": "maximum printed as VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "High-level output current",
          "symbol": "IOH",
          "kind": "recommended_operating",
          "unit": "mA",
          "min": -12,
          "typ": null,
          "max": null,
          "conditions": "VCC = 3 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "High-level output current",
          "symbol": "IOH",
          "kind": "recommended_operating",
          "unit": "mA",
          "min": -24,
          "typ": null,
          "max": null,
          "conditions": "VCC = 4.5 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Low-level output current",
          "symbol": "IOL",
          "kind": "recommended_operating",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 12,
          "conditions": "VCC = 3 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Low-level output current",
          "symbol": "IOL",
          "kind": "recommended_operating",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 24,
          "conditions": "VCC = 4.5 V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input transition rise or fall rate",
          "symbol": "Δt/Δv",
          "kind": "recommended_operating",
          "unit": "ns/V",
          "min": null,
          "typ": null,
          "max": 8,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Operating free-air temperature",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "SN74AC373",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Supply voltage range",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Input clamp current",
          "symbol": "IIK",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -20,
          "typ": null,
          "max": 20,
          "conditions": "VI < 0 or VI > VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output clamp current",
          "symbol": "IOK",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -20,
          "typ": null,
          "max": 20,
          "conditions": "VO < 0 or VO > VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Continuous output current",
          "symbol": "IO",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -50,
          "typ": null,
          "max": 50,
          "conditions": "VO = 0 to VCC",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Continuous current through VCC or GND",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -200,
          "typ": null,
          "max": 200,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-ambient thermal resistance",
          "symbol": "RθJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 69,
          "max": null,
          "conditions": "N (PDIP) package, 20 pins",
          "source_page": 5,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "sn74ac373n"
  ],
  "discovery_pitch": "SN74AC373N (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn74ac373n.kicad_sym",
    "sn74ac373n.kicad_mod",
    "sn74ac373n.glb",
    "sn74ac373n.step",
    "sn74ac373n.lbr",
    "docs/hero.png",
    "docs/sn74ac373n-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn74ac373n-hero.glb",
    "sn74ac373n-hero.overlay.json",
    "sn74ac373n-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}