main
Ray
Publish 0.1.0
c240f9c
SN74ABT827PW
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · TSSOP-24
SN74ABT827PW from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Active-low output enable; if OE1 or OE2 is high, all ten outputs are placed in the high-impedance state. |
| 2 | A1 | input | Data input A1 of the 10-bit buffer, passed to output Y1 as true data when enabled. |
| 3 | A2 | input | Data input A2 of the 10-bit buffer, passed to output Y2 as true data when enabled. |
| 4 | A3 | input | Data input A3 of the 10-bit buffer, passed to output Y3 as true data when enabled. |
| 5 | A4 | input | Data input A4 of the 10-bit buffer, passed to output Y4 as true data when enabled. |
| 6 | A5 | input | Data input A5 of the 10-bit buffer, passed to output Y5 as true data when enabled. |
| 7 | A6 | input | Data input A6 of the 10-bit buffer, passed to output Y6 as true data when enabled. |
| 8 | A7 | input | Data input A7 of the 10-bit buffer, passed to output Y7 as true data when enabled. |
| 9 | A8 | input | Data input A8 of the 10-bit buffer, passed to output Y8 as true data when enabled. |
| 10 | A9 | input | Data input A9 of the 10-bit buffer, passed to output Y9 as true data when enabled. |
| 11 | A10 | input | Data input A10 of the 10-bit buffer, passed to output Y10 as true data when enabled. |
| 12 | GND | power_in | Ground reference pin for the device. |
| 13 | OE2 | input | Active-low output enable; if OE2 or OE1 is high, all ten outputs are placed in the high-impedance state. |
| 14 | Y10 | output | 3-state output Y10 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 15 | Y9 | output | 3-state output Y9 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 16 | Y8 | output | 3-state output Y8 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 17 | Y7 | output | 3-state output Y7 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 18 | Y6 | output | 3-state output Y6 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 19 | Y5 | output | 3-state output Y5 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 20 | Y4 | output | 3-state output Y4 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 21 | Y3 | output | 3-state output Y3 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 22 | Y2 | output | 3-state output Y2 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 23 | Y1 | output | 3-state output Y1 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 24 | VCC | power_in | Supply voltage, recommended operating range 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-24 |
| Category | Logic |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | 5.5 | V | 3 | ||
| High-level input voltage | VIH | 2 | V | 3 | |||
| Low-level input voltage | VIL | 0.8 | V | 3 | |||
| Input voltage | VI | 0 | V | maximum VCC | 3 | ||
| High-level output current | IOH | -32 | mA | SN74ABT827 | 3 | ||
| Low-level output current | IOL | 64 | mA | SN74ABT827 | 3 | ||
| Input transition rise or fall rate | ∆t/∆v | 5 | ns/V | 3 | |||
| Power-up ramp rate | ∆t/∆VCC | 200 | µs/V | 3 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | SN74ABT827 | 3 | |
| Supply voltage range | VCC | -0.5 | 7 | V | 2 | ||
| Input voltage range | VI | -0.5 | 7 | V | see Note 1 | 2 | |
| Voltage applied to any output in the high or power-off state | VO | -0.5 | 5.5 | V | 2 | ||
| Current into any output in the low state | IO | 128 | mA | SN74ABT827 | 2 | ||
| Input clamp current | IIK | -18 | mA | VI < 0 | 2 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| High-level input clamp voltage | VIK | -1.2 | V | VCC = 4.5 V, II = -18 mA | 4 | ||
| High-level output voltage | VOH | 2.5 | V | VCC = 4.5 V, IOH = -3 mA | 4 | ||
| High-level output voltage | VOH | 3 | V | VCC = 5 V, IOH = -3 mA | 4 | ||
| High-level output voltage | VOH | 2 | V | VCC = 4.5 V, IOH = -24 mA | 4 | ||
| Low-level output voltage | VOL | 0.55 | V | VCC = 4.5 V, IOL = 48 mA | 4 | ||
| Input current | II | -1 | 1 | µA | VCC = 0 to 5.5 V, VI = VCC or GND | 4 | |
| Off-state output current at power-up | IOZPU | -50 | 50 | µA | VCC = 0 to 2.1 V, VO = 0.5 V to 2.7 V, OE = X | 4 | |
| Off-state output current at power-down | IOZPD | -50 | 50 | µA | VCC = 2.1 V to 0, VO = 0.5 V to 2.7 V, OE = X | 4 | |
| High-level off-state output current | IOZH | 10 | µA | VCC = 2.1 V to 5.5 V, VO = 2.7 V, OE ≥ 2 V | 4 | ||
| Low-level off-state output current | IOZL | -10 | µA | VCC = 2.1 V to 5.5 V, VO = 0.5 V, OE ≥ 2 V | 4 | ||
| Power-off input/output current | Ioff | -100 | 100 | µA | VCC = 0, VI or VO ≤ 5.5 V | 4 | |
| High-level output current (leakage at output high) | ICEX | 50 | µA | VCC = 5.5 V, VO = 5.5 V, outputs high | 4 | ||
| Short-circuit output current | IO | -50 | -140 | -225 | mA | VCC = 5.5 V, VO = 2.5 V | 4 |
| Supply current, outputs high | ICC | 80 | 250 | µA | VCC = 5.5 V, IO = 0, outputs high | 4 | |
| Supply current, outputs low | ICC | 35 | 40 | mA | VCC = 5.5 V, IO = 0, VI = VCC or GND, outputs low | 4 | |
| Supply current, outputs disabled | ICC | 80 | 250 | µA | VCC = 5.5 V, IO = 0, VI = VCC or GND, outputs disabled | 4 | |
| Supply current increase per input, outputs enabled | ∆ICC | 1.5 | mA | VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND, outputs enabled | 4 | ||
| Supply current increase per input, outputs disabled | ∆ICC | 50 | 50 | µA | VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND, outputs disabled | 4 | |
| Supply current increase per input, control inputs | ∆ICC | 1.5 | mA | VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND, control inputs | 4 | ||
| Input capacitance | Ci | 4 | pF | VI = 2.5 V or 0.5 V | 4 | ||
| Output capacitance | Co | 8 | pF | VO = 2.5 V or 0.5 V | 4 | ||
| Hysteresis | Vhys | 100 | mV | 4 | |||
| Propagation delay low-to-high, A to Y | tPLH | 1.1 | 2.6 | 4.8 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Propagation delay high-to-low, A to Y | tPHL | 1.1 | 2.3 | 4.7 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output enable time to high level, OE to Y | tPZH | 1 | 3.2 | 5.9 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output enable time to low level, OE to Y | tPZL | 1 | 3.3 | 6.9 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output disable time from high level, OE to Y | tPHZ | 2 | 4.9 | 6.8 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output disable time from low level, OE to Y | tPLZ | 1.3 | 4.2 | 6.9 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Package thermal impedance, junction to ambient, PW package | θJA | 120 | °C/W | PW package | 2 |
CAD (KiCad official)
- Symbol:
SN74ABT827PW - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
sn74abt827pw-etched.step/sn74abt827pw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74abt827pw.step/sn74abt827pw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
22efb9a53b3f7213, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN74ABT827PW
**Texas Instruments** · Buffers, Drivers, Receivers, Transceivers · TSSOP-24
SN74ABT827PW from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Active-low output enable; if OE1 or OE2 is high, all ten outputs are placed in the high-impedance state. |
| 2 | A1 | input | Data input A1 of the 10-bit buffer, passed to output Y1 as true data when enabled. |
| 3 | A2 | input | Data input A2 of the 10-bit buffer, passed to output Y2 as true data when enabled. |
| 4 | A3 | input | Data input A3 of the 10-bit buffer, passed to output Y3 as true data when enabled. |
| 5 | A4 | input | Data input A4 of the 10-bit buffer, passed to output Y4 as true data when enabled. |
| 6 | A5 | input | Data input A5 of the 10-bit buffer, passed to output Y5 as true data when enabled. |
| 7 | A6 | input | Data input A6 of the 10-bit buffer, passed to output Y6 as true data when enabled. |
| 8 | A7 | input | Data input A7 of the 10-bit buffer, passed to output Y7 as true data when enabled. |
| 9 | A8 | input | Data input A8 of the 10-bit buffer, passed to output Y8 as true data when enabled. |
| 10 | A9 | input | Data input A9 of the 10-bit buffer, passed to output Y9 as true data when enabled. |
| 11 | A10 | input | Data input A10 of the 10-bit buffer, passed to output Y10 as true data when enabled. |
| 12 | GND | power_in | Ground reference pin for the device. |
| 13 | OE2 | input | Active-low output enable; if OE2 or OE1 is high, all ten outputs are placed in the high-impedance state. |
| 14 | Y10 | output | 3-state output Y10 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 15 | Y9 | output | 3-state output Y9 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 16 | Y8 | output | 3-state output Y8 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 17 | Y7 | output | 3-state output Y7 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 18 | Y6 | output | 3-state output Y6 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 19 | Y5 | output | 3-state output Y5 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 20 | Y4 | output | 3-state output Y4 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 21 | Y3 | output | 3-state output Y3 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 22 | Y2 | output | 3-state output Y2 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 23 | Y1 | output | 3-state output Y1 with high drive capability of −32 mA IOH and 64 mA IOL. |
| 24 | VCC | power_in | Supply voltage, recommended operating range 4.5 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-24 |
| Category | Logic |
| Pins | 24 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | | 5.5 | V | | 3 |
| High-level input voltage | VIH | 2 | | | V | | 3 |
| Low-level input voltage | VIL | | | 0.8 | V | | 3 |
| Input voltage | VI | 0 | | | V | maximum VCC | 3 |
| High-level output current | IOH | | | -32 | mA | SN74ABT827 | 3 |
| Low-level output current | IOL | | | 64 | mA | SN74ABT827 | 3 |
| Input transition rise or fall rate | ∆t/∆v | | | 5 | ns/V | | 3 |
| Power-up ramp rate | ∆t/∆VCC | | | 200 | µs/V | | 3 |
| Operating free-air temperature | TA | -40 | | 85 | °C | SN74ABT827 | 3 |
| Supply voltage range | VCC | -0.5 | | 7 | V | | 2 |
| Input voltage range | VI | -0.5 | | 7 | V | see Note 1 | 2 |
| Voltage applied to any output in the high or power-off state | VO | -0.5 | | 5.5 | V | | 2 |
| Current into any output in the low state | IO | | | 128 | mA | SN74ABT827 | 2 |
| Input clamp current | IIK | -18 | | | mA | VI < 0 | 2 |
| Output clamp current | IOK | -50 | | | mA | VO < 0 | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| High-level input clamp voltage | VIK | | | -1.2 | V | VCC = 4.5 V, II = -18 mA | 4 |
| High-level output voltage | VOH | 2.5 | | | V | VCC = 4.5 V, IOH = -3 mA | 4 |
| High-level output voltage | VOH | 3 | | | V | VCC = 5 V, IOH = -3 mA | 4 |
| High-level output voltage | VOH | 2 | | | V | VCC = 4.5 V, IOH = -24 mA | 4 |
| Low-level output voltage | VOL | | | 0.55 | V | VCC = 4.5 V, IOL = 48 mA | 4 |
| Input current | II | -1 | | 1 | µA | VCC = 0 to 5.5 V, VI = VCC or GND | 4 |
| Off-state output current at power-up | IOZPU | -50 | | 50 | µA | VCC = 0 to 2.1 V, VO = 0.5 V to 2.7 V, OE = X | 4 |
| Off-state output current at power-down | IOZPD | -50 | | 50 | µA | VCC = 2.1 V to 0, VO = 0.5 V to 2.7 V, OE = X | 4 |
| High-level off-state output current | IOZH | | | 10 | µA | VCC = 2.1 V to 5.5 V, VO = 2.7 V, OE ≥ 2 V | 4 |
| Low-level off-state output current | IOZL | -10 | | | µA | VCC = 2.1 V to 5.5 V, VO = 0.5 V, OE ≥ 2 V | 4 |
| Power-off input/output current | Ioff | -100 | | 100 | µA | VCC = 0, VI or VO ≤ 5.5 V | 4 |
| High-level output current (leakage at output high) | ICEX | | | 50 | µA | VCC = 5.5 V, VO = 5.5 V, outputs high | 4 |
| Short-circuit output current | IO | -50 | -140 | -225 | mA | VCC = 5.5 V, VO = 2.5 V | 4 |
| Supply current, outputs high | ICC | | 80 | 250 | µA | VCC = 5.5 V, IO = 0, outputs high | 4 |
| Supply current, outputs low | ICC | | 35 | 40 | mA | VCC = 5.5 V, IO = 0, VI = VCC or GND, outputs low | 4 |
| Supply current, outputs disabled | ICC | | 80 | 250 | µA | VCC = 5.5 V, IO = 0, VI = VCC or GND, outputs disabled | 4 |
| Supply current increase per input, outputs enabled | ∆ICC | | | 1.5 | mA | VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND, outputs enabled | 4 |
| Supply current increase per input, outputs disabled | ∆ICC | | 50 | 50 | µA | VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND, outputs disabled | 4 |
| Supply current increase per input, control inputs | ∆ICC | | | 1.5 | mA | VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND, control inputs | 4 |
| Input capacitance | Ci | | 4 | | pF | VI = 2.5 V or 0.5 V | 4 |
| Output capacitance | Co | | 8 | | pF | VO = 2.5 V or 0.5 V | 4 |
| Hysteresis | Vhys | | 100 | | mV | | 4 |
| Propagation delay low-to-high, A to Y | tPLH | 1.1 | 2.6 | 4.8 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Propagation delay high-to-low, A to Y | tPHL | 1.1 | 2.3 | 4.7 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output enable time to high level, OE to Y | tPZH | 1 | 3.2 | 5.9 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output enable time to low level, OE to Y | tPZL | 1 | 3.3 | 6.9 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output disable time from high level, OE to Y | tPHZ | 2 | 4.9 | 6.8 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Output disable time from low level, OE to Y | tPLZ | 1.3 | 4.2 | 6.9 | ns | CL = 50 pF; typ at VCC = 5 V, TA = 25°C | 4 |
| Package thermal impedance, junction to ambient, PW package | θJA | | 120 | | °C/W | PW package | 2 |
## CAD (KiCad official)
- Symbol: `SN74ABT827PW`
- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`
- 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files: `sn74abt827pw-etched.step` / `sn74abt827pw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn74abt827pw.step` / `sn74abt827pw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn74abt827.pdf) (19 pp, sha256 `22efb9a53b3f7213`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn74abt827pw-datasheet.pdf)