component
SN74ABT2244ADBR
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, SSOP-20-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN74ABT2244ADBR
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · SSOP-20-208mil
SN74ABT2244ADBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Active-low output enable for buffer group 1 (1Y1-1Y4); high puts outputs in high-impedance state. |
| 2 | 1A1 | input | Data input A1 of group 1, drives 1Y1 (pin 18); unused inputs must be held high or low. |
| 3 | 2Y4 | output | 3-state output Y4 of group 2 with equivalent 25-ohm series resistor, follows 2A4; sinks up to 12 mA. |
| 4 | 1A2 | input | Data input A2 of group 1, drives 1Y2 (pin 16); unused inputs must be held high or low. |
| 5 | 2Y3 | output | 3-state output Y3 of group 2 with equivalent 25-ohm series resistor, follows 2A3; sinks up to 12 mA. |
| 6 | 1A3 | input | Data input A3 of group 1, drives 1Y3 (pin 14); unused inputs must be held high or low. |
| 7 | 2Y2 | output | 3-state output Y2 of group 2 with equivalent 25-ohm series resistor, follows 2A2; sinks up to 12 mA. |
| 8 | 1A4 | input | Data input A4 of group 1, drives 1Y4 (pin 12); unused inputs must be held high or low. |
| 9 | 2Y1 | output | 3-state output Y1 of group 2 with equivalent 25-ohm series resistor, follows 2A1; sinks up to 12 mA. |
| 10 | GND | power_in | Ground. |
| 11 | 2A1 | input | Data input A1 of group 2, drives 2Y1 (pin 9); unused inputs must be held high or low. |
| 12 | 1Y4 | output | 3-state output Y4 of group 1 with equivalent 25-ohm series resistor, follows 1A4; sinks up to 12 mA. |
| 13 | 2A2 | input | Data input A2 of group 2, drives 2Y2 (pin 7); unused inputs must be held high or low. |
| 14 | 1Y3 | output | 3-state output Y3 of group 1 with equivalent 25-ohm series resistor, follows 1A3; sinks up to 12 mA. |
| 15 | 2A3 | input | Data input A3 of group 2, drives 2Y3 (pin 5); unused inputs must be held high or low. |
| 16 | 1Y2 | output | 3-state output Y2 of group 1 with equivalent 25-ohm series resistor, follows 1A2; sinks up to 12 mA. |
| 17 | 2A4 | input | Data input A4 of group 2, drives 2Y4 (pin 3); unused inputs must be held high or low. |
| 18 | 1Y1 | output | 3-state output Y1 of group 1 with equivalent 25-ohm series resistor, follows 1A1; sinks up to 12 mA. |
| 19 | 2OE | input | Active-low output enable for buffer group 2 (2Y1-2Y4); high puts outputs in high-impedance state. |
| 20 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V recommended (absolute maximum -0.5 V to 7 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-20-208mil |
| Category | Logic |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
SN74ABT2244ADBR - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
sn74abt2244adbr-etched.step/sn74abt2244adbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74abt2244adbr.step/sn74abt2244adbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
00fe06ffe637ec7f, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).