Generated by kicad-footprint-generator · KiCad file format 20260206
SN65MLVD201D
Texas Instruments · LVDS ICs · SOIC-8
SN65MLVD201D from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver logic output, rated -0.3 V to 4 V absolute maximum, and high-impedance when RE is high. |
| 2 | RE | input | Active-low receiver enable input, rated -0.5 V to 4 V absolute maximum; the receiver is disabled when RE is high. |
| 3 | DE | input | Driver enable input, rated -0.5 V to 4 V absolute maximum; the driver outputs are high-impedance when DE is low. |
| 4 | D | input | Driver data input, rated -0.5 V to 4 V absolute maximum, with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 5 | GND | power_in | Network ground reference for all voltages except the differential bus voltages. |
| 6 | A | bidirectional | Non-inverting driver output and receiver input bus terminal, with bus voltage limited to -1.4 V to 3.8 V. |
| 7 | B | bidirectional | Inverting driver output and receiver input bus terminal, with bus voltage limited to -1.4 V to 3.8 V. |
| 8 | VCC | power_in | Supply voltage, 3 V minimum, 3.3 V typical, and 3.6 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | 3 | 3.3 | 3.6 | V | 2 | |
| High-level input voltage | VIH | 2 | V | 2 | |||
| Low-level input voltage | VIL | 0.8 | V | 2 | |||
| Voltage at any bus terminal | VA, VB, VY or VZ | -1.4 | 3.8 | V | 2 | ||
| Magnitude of differential input voltage | /VID/ | 0.05 | VCC V | 2 | |||
| Operating free-air temperature | TA | -40 | 85 | °C | 2 | ||
| Supply voltage | VCC | -0.5 | 4 | V | 2 | ||
| Driver input and enable voltage | D, DE, RE | -0.5 | 4 | V | 2 | ||
| Input voltage range A, B | A, B | -1.8 | 4 | V | 201, 206 | 2 | |
| Receiver output voltage | R | -0.3 | 4 | V | 2 | ||
| Output voltage range | Y, Z, A, or B | -1.8 | 4 | V | 2 | ||
| Electrostatic discharge Human Body Model | -8 | 8 | kV | A, B, Y, Z pins, JEDEC 22-A114-A | 2 | ||
| Electrostatic discharge Human Body Model | -2 | 2 | kV | all pins, JEDEC 22-A114-A | 2 | ||
| Electrostatic discharge Charged-Device Model | -1500 | 1500 | V | all pins, JEDEC 22-C101 | 2 | ||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Package D(8) power rating | 725 | mW | TA ≤ 25°C | 2 | |||
| Package D(8) derating factor | 5.8 | mW/°C | above TA = 25°C | 2 | |||
| Package D(8) power rating | 377 | mW | TA = 85°C | 2 | |||
| Supply current driver only | ICC | 13 | 22 | mA | RE and DE at VCC, RL = 50 Ω | 3 | |
| Supply current both disabled | ICC | 1 | 4 | mA | RE at VCC, DE at 0 V, RL = No Load | 3 | |
| Supply current both enabled | ICC | 16 | 24 | mA | RE at 0 V, DE at VCC, RL = 50 Ω | 3 | |
| Supply current receiver only | ICC | 4 | 13 | mA | RE at 0 V, DE at 0 V, RL = 50 Ω | 3 | |
| Differential output voltage magnitude | /VAB/ or /VYZ/ | 480 | 650 | mV | See Figure 2 | 3 | |
| Change in differential output voltage magnitude | Δ/VAB/ or Δ/VYZ/ | -50 | 50 | mV | between logic states | 3 | |
| Steady-state common-mode output voltage | VOS(SS) | 0.8 | 1.2 | V | 3 | ||
| Change in steady-state common-mode output voltage | ΔVOS(SS) | -50 | 50 | mV | See Figure 3 | 3 | |
| Peak-to-peak common-mode output voltage | VOS(PP) | 150 | mV | 3 | |||
| Maximum steady-state open-circuit output voltage Y | VY(OC) or VA(OC) | 0 | 2.4 | V | See Figure 7 | 3 | |
| Maximum steady-state open-circuit output voltage Z | VZ(OC) or VB(OC) | 0 | 2.4 | V | See Figure 7 | 3 | |
| Voltage overshoot, low-to-high level output | VP(H) | 1.2 | VSS V | See Figure 5 | 3 | ||
| Voltage overshoot, high-to-low level output | VP(L) | -0.2 | VSS V | See Figure 5 | 3 | ||
| High-level input current (D, DE) | IIH | 0 | 10 | µA | VIH = 2 V | 3 | |
| Low-level input current (D, DE) | IIL | 0 | 10 | µA | VIL = 0.8 V | 3 | |
| Differential short-circuit output current magnitude | IOS | 24 | mA | See Figure 4 | 3 | ||
| High-impedance state output current (driver only) | IOZ | -15 | 10 | µA | -1.4 V ≤ VY or VZ ≤ 3.8 V, other output = 1.2 V | 3 | |
| Power-off output current | IO(OFF) | -10 | 10 | µA | -1.4 V ≤ VY or VZ ≤ 3.8 V, other output = 1.2 V, 0 V ≤ VCC ≤ 1.5 V | 3 | |
| Output capacitance | CY or CZ | 3 | pF | driver disabled | 3 | ||
| Differential output capacitance | CYZ | 2.5 | pF | driver disabled | 3 | ||
| Output capacitance balance | CY/Z | 0.99 | 1.01 | (CY/CZ) | 3 | ||
| Positive-going differential input voltage threshold Type 1 | VIT+ | 50 | mV | Type 1, See Figure 9 and Table 1 | 4 | ||
| Negative-going differential input voltage threshold Type 1 | VIT- | -50 | mV | Type 1, See Figure 9 and Table 1 | 4 | ||
| Differential input voltage hysteresis Type 1 | VHYS | 25 | mV | Type 1, (VIT+, VIT-) | 4 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 4 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 8 mA | 4 | ||
| High-level input current (RE) | IIH | -10 | 0 | µA | VIH = 2 V | 4 | |
| Low-level input current (RE) | IIL | -10 | 0 | µA | VIL = 0.8 V | 4 | |
| High-impedance output current | IOZ | -10 | 15 | µA | VO = 0 V or 3.6 V | 4 | |
| Input capacitance | CA or CB | 3 | pF | Other input at 1.2 V | 4 | ||
| Differential input capacitance | CAB | 2.5 | pF | VAB = 0.4 sin(30E6πt) V | 4 | ||
| Input capacitance balance | CA/B | 0.99 | 1.01 | (CA/CB) | 4 | ||
| Receiver input current A, driver-disabled | IA | 0 | 32 | µA | VA = 3.8 V, VB = 1.2 V | 5 | |
| Receiver input current A, driver-disabled | IA | -20 | 20 | µA | VA = 0 V or 2.4 V, VB = 1.2 V | 5 | |
| Receiver input current A, driver-disabled | IA | -32 | 0 | µA | VA = -1.4 V, VB = 1.2 V | 5 | |
| Receiver input current B, driver-disabled | IB | 0 | 32 | µA | VB = 3.8 V, VA = 1.2 V | 5 | |
| Receiver input current B, driver-disabled | IB | -20 | 20 | µA | VB = 0 V or 2.4 V, VA = 1.2 V | 5 | |
| Receiver input current B, driver-disabled | IB | -32 | 0 | µA | VB = -1.4 V, VA = 1.2 V | 5 | |
| Disabled differential input current | IAB (IA, IB) | -4 | 4 | µA | VA = VB, 1.4 ≤ VA ≤ 3.8 V | 5 | |
| Power-off input current A | IA(OFF) | -20 | 20 | µA | VA = 0 V or 2.4 V, VB = 1.2 V, 0 V ≤ VCC ≤ 1.5 V | 5 | |
| Power-off input current B | IB(OFF) | -20 | 20 | µA | VB = 0 V or 2.4 V, VA = 1.2 V, 0 V ≤ VCC ≤ 1.5 V | 5 | |
| Power-off differential input current | IAB(OFF) (IA, IB) | -4 | 4 | µA | VA = VB, 0 V ≤ VCC ≤ 1.5 V, -1.4 ≤ VA ≤ 3.8 V | 5 | |
| Propagation delay time, low-to-high-level output | tPLH | 1 | 1.5 | 2.4 | ns | driver | 5 |
| Propagation delay time, high-to-low-level output | tPHL | 1 | 1.5 | 2.4 | ns | driver | 5 |
| Differential output signal rise time | tr | 1 | 1.6 | ns | See Figure 5 | 5 | |
| Differential output signal fall time | tf | 1 | 1.6 | ns | See Figure 5 | 5 | |
| Pulse skew | tsk(p) | 0 | 100 | ps | /tPHL, tPLH/ | 5 | |
| Part-to-part skew | tsk(pp) | 1 | ns | 5 | |||
| Period jitter, rms | tjit(per) | 2 | 3 | ps | 100 MHz clock input | 5 | |
| Peak-to-peak jitter | tjit(pp) | 30 | 130 | ps | 200 Mbps 2^15-1 PRBS input | 5 | |
| Disable time, high-level-to-high-impedance output | tPHZ | 7 | ns | See Figure 6 | 5 | ||
| Disable time, low-level-to-high-impedance output | tPLZ | 7 | ns | See Figure 6 | 5 | ||
| Enable time, high-impedance-to-high-level output | tPZH | 7 | ns | See Figure 6 | 5 | ||
| Enable time, high-impedance-to-low-level output | tPZL | 7 | ns | See Figure 6 | 5 | ||
| Propagation delay time, low-to-high-level output (receiver) | tpLH | 2 | 4 | 6 | ns | CL = 15 pF, See Figure 10 | 6 |
| Propagation delay time, high-to-low-level output (receiver) | tpHL | 2 | 4 | 6 | ns | CL = 15 pF, See Figure 10 | 6 |
| Output signal rise time | tr | 1 | 2.3 | ns | CL = 15 pF, See Figure 10 | 6 | |
| Output signal fall time | tf | 1 | 2.3 | ns | CL = 15 pF, See Figure 10 | 6 | |
| Pulse skew Type 1 (receiver) | tsk(p) | 100 | 300 | ps | /tpHL, tpLH/, Type 1 | 6 | |
| Part-to-part skew (receiver) | tsk(pp) | 1 | ns | 6 | |||
| Period jitter, rms (receiver) | tjit(per) | 4 | 7 | ps | 100 MHz clock input | 6 | |
| Peak-to-peak jitter Type 1 (receiver) | tjit(pp) | 300 | 700 | ps | 200 Mbps 2^15-1 PRBS input, Type 1 | 6 | |
| Disable time, high-level-to-high-impedance output (receiver) | tpHZ | 10 | ns | See Figure 11 | 6 | ||
| Disable time, low-level-to-high-impedance output (receiver) | tpLZ | 10 | ns | See Figure 11 | 6 | ||
| Enable time, high-impedance-to-high-level output (receiver) | tpZH | 15 | ns | See Figure 11 | 6 | ||
| Enable time, high-impedance-to-low-level output (receiver) | tpZL | 15 | ns | See Figure 11 | 6 |
CAD (KiCad official)
- Symbol:
SN65MLVD201D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn65mlvd201d-etched.step/sn65mlvd201d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65mlvd201d.step/sn65mlvd201d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
5073de1b180d3c83, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).