main
Ray
Publish 0.1.0
40d52ab
SN65MLVD047AD
Texas Instruments · LVDS ICs · SOIC-16
SN65MLVD047AD from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active-high driver enable input; with EN low the Y and Z outputs go high impedance, and the LVTTL input has a built-in 360kΩ pull-down. |
| 2 | 1A | input | Driver 1 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 3 | 2A | input | Driver 2 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 4 | VCC | power_in | Supply voltage, 3 V minimum to 3.6 V maximum with 3.3 V nominal. |
| 5 | GND | power_in | Circuit ground reference for all voltages on the device. |
| 6 | 3A | input | Driver 3 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 7 | 4A | input | Driver 4 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 8 | EN | input | Active-low driver enable input; with EN high the Y and Z outputs go high impedance, and the LVTTL input has a built-in 360kΩ pull-down. |
| 9 | 4Z | output | Inverting M-LVDS bus output of driver 4, rated for bus voltages from -1.4 V to 3.8 V. |
| 10 | 4Y | output | Non-inverting M-LVDS bus output of driver 4, rated for bus voltages from -1.4 V to 3.8 V. |
| 11 | 3Y | output | Non-inverting M-LVDS bus output of driver 3, rated for bus voltages from -1.4 V to 3.8 V. |
| 12 | 3Z | output | Inverting M-LVDS bus output of driver 3, rated for bus voltages from -1.4 V to 3.8 V. |
| 13 | 2Z | output | Inverting M-LVDS bus output of driver 2, rated for bus voltages from -1.4 V to 3.8 V. |
| 14 | 2Y | output | Non-inverting M-LVDS bus output of driver 2, rated for bus voltages from -1.4 V to 3.8 V. |
| 15 | 1Y | output | Non-inverting M-LVDS bus output of driver 1, rated for bus voltages from -1.4 V to 3.8 V. |
| 16 | 1Z | output | Inverting M-LVDS bus output of driver 1, rated for bus voltages from -1.4 V to 3.8 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 4 | V | 4 | ||
| Input voltage range A, EN, EN | VI | -0.5 | 4 | V | 4 | ||
| Output voltage range Y, Z | VO | -1.8 | 4 | V | 4 | ||
| Junction temperature | TJ | 140 | °C | 4 | |||
| Device power dissipation | PD | 288.5 | mW | EN = VCC, EN = GND, RL = 50Ω, 100MHz 50% duty cycle square wave 1A:4A, TA = 85°C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| High-level input voltage | VIH | 2 | V | upper limit printed as VCC | 4 | ||
| Low-level input voltage | VIL | 0 | 0.8 | V | 4 | ||
| Voltage at any bus terminal (separate or common mode) | VY or VZ | -1.4 | 3.8 | V | 4 | ||
| Differential load resistance | RL | 30 | 55 | Ω | 4 | ||
| Signaling rate | 1/tUI | 200 | Mbps | 4 | |||
| Clock frequency | 100 | MHz | 4 | ||||
| Junction temperature (operating) | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | θJA | 128 | °C/W | Low-K board, no airflow, D package | 5 | ||
| Junction-to-board thermal resistance | θJB | 51.1 | °C/W | High-K board, D package | 5 | ||
| Junction-to-case thermal resistance | θJC | 45.4 | °C/W | D package | 5 | ||
| Supply current, driver enabled | ICC | 59 | 70 | mA | EN = VCC, EN = GND, RL = 50Ω, all inputs = VCC or GND | 5 | |
| Supply current, driver disabled | ICC | 2 | 4 | mA | EN = GND, EN = VCC, RL = no load, all inputs = VCC or GND | 5 | |
| High-level input current | /IIH/ | 0 | 10 | μA | VIH = 2 V or VCC | 6 | |
| Low-level input current | /IIL/ | 0 | 10 | μA | VIL = GND or 0.8 V | 6 | |
| Differential output voltage magnitude | /VYZ/ | 480 | 650 | mV | See Figure 6-2 | 6 | |
| Change in differential output voltage magnitude between logic states | Δ/VYZ/ | -50 | 50 | mV | 6 | ||
| Steady-state common-mode output voltage | VOS(SS) | 0.8 | 1.2 | V | See Figure 6-3 | 6 | |
| Change in steady-state common-mode output voltage between logic states | ΔVOS(SS) | -50 | 50 | mV | 6 | ||
| Peak-to-peak common-mode output voltage | VOS(PP) | 150 | mV | 6 | |||
| Maximum steady-state open-circuit output voltage | VY(OC) | 0 | 2.4 | V | See Figure 6-7 | 6 | |
| Voltage overshoot, low-to-high level output | VP(H) | 1.2 | VSS | See Figure 6-5; limit printed as 1.2 VSS | 6 | ||
| Voltage overshoot, high-to-low level output | VP(L) | -0.2 | VSS | See Figure 6-5; limit printed as -0.2 VSS | 6 | ||
| Differential short-circuit output current magnitude | /IOS/ | 24 | mA | See Figure 6-4 | 6 | ||
| High-impedance state output current | IOZ | -15 | 10 | μA | -1.4 V ≤ (VY or VZ) ≤ 3.8 V, other output = 1.2 V | 6 | |
| Power-off output current | IO(OFF) | -10 | 10 | μA | -1.4 V ≤ (VY or VZ) ≤ 3.8 V, other output = 1.2 V, VCC = 0 V | 6 | |
| Output capacitance balance (CY/CZ) | CY/Z | 0.99 | 1.01 | 6 | |||
| Input capacitance | Ci | 5 | pF | VI = 0.4 sin(30E6πt) + 0.5 V | 6 | ||
| Output capacitance | CY or CZ | 3 | pF | VY or VZ = 0.4 sin(30E6πt) + 0.5 V, other input at 1.2 V, driver disabled | 6 | ||
| Differential output capacitance | CYZ | 2.5 | pF | VYZ = 0.4 sin(30E6πt) V, driver disabled | 6 | ||
| Propagation delay time, low-to-high-level output | tPLH | 1 | 1.5 | 2.4 | ns | See Figure 6-5 | 7 |
| Propagation delay time, high-to-low-level output | tPHL | 1 | 1.5 | 2.4 | ns | See Figure 6-5 | 7 |
| Differential output signal rise time | tr | 1 | 1.9 | ns | 7 | ||
| Differential output signal fall time | tf | 1 | 1.9 | ns | 7 | ||
| Output skew | tsk(o) | 100 | ps | 7 | |||
| Pulse skew (/tpHL - tpLH/) | tsk(p) | 22 | 100 | ps | 7 | ||
| Part-to-part skew | tsk(pp) | 600 | ps | 7 | |||
| Period jitter, rms (1 standard deviation) | tjit(per) | 0.2 | 1 | ps | All inputs, 100 MHz clock input | 7 | |
| Cycle-to-cycle jitter | tjit(c-c) | 5 | 36 | ps | All inputs, 100 MHz clock input | 7 | |
| Peak-to-peak jitter | tjit(pp) | 46 | 158 | ps | All inputs, 200 Mbps 2^15-1 PRBS input | 7 | |
| Enable time, high-impedance-to-high-level output | tPZH | 9 | ns | See Figure 6-6 | 7 | ||
| Enable time, high-impedance-to-low-level output | tPZL | 9 | ns | See Figure 6-6 | 7 | ||
| Disable time, high-level-to-high-impedance output | tPHZ | 10 | ns | See Figure 6-6 | 7 | ||
| Disable time, low-level-to-high-impedance output | tPLZ | 10 | ns | See Figure 6-6 | 7 |
CAD (KiCad official)
- Symbol:
SN65MLVD047AD - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
sn65mlvd047ad-etched.step/sn65mlvd047ad-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65mlvd047ad.step/sn65mlvd047ad.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
2fcd322db9d3325d, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN65MLVD047AD
**Texas Instruments** · LVDS ICs · SOIC-16
SN65MLVD047AD from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active-high driver enable input; with EN low the Y and Z outputs go high impedance, and the LVTTL input has a built-in 360kΩ pull-down. |
| 2 | 1A | input | Driver 1 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 3 | 2A | input | Driver 2 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 4 | VCC | power_in | Supply voltage, 3 V minimum to 3.6 V maximum with 3.3 V nominal. |
| 5 | GND | power_in | Circuit ground reference for all voltages on the device. |
| 6 | 3A | input | Driver 3 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 7 | 4A | input | Driver 4 data input; LVTTL logic input with VIH of 2 V minimum and VIL of 0.8 V maximum. |
| 8 | EN | input | Active-low driver enable input; with EN high the Y and Z outputs go high impedance, and the LVTTL input has a built-in 360kΩ pull-down. |
| 9 | 4Z | output | Inverting M-LVDS bus output of driver 4, rated for bus voltages from -1.4 V to 3.8 V. |
| 10 | 4Y | output | Non-inverting M-LVDS bus output of driver 4, rated for bus voltages from -1.4 V to 3.8 V. |
| 11 | 3Y | output | Non-inverting M-LVDS bus output of driver 3, rated for bus voltages from -1.4 V to 3.8 V. |
| 12 | 3Z | output | Inverting M-LVDS bus output of driver 3, rated for bus voltages from -1.4 V to 3.8 V. |
| 13 | 2Z | output | Inverting M-LVDS bus output of driver 2, rated for bus voltages from -1.4 V to 3.8 V. |
| 14 | 2Y | output | Non-inverting M-LVDS bus output of driver 2, rated for bus voltages from -1.4 V to 3.8 V. |
| 15 | 1Y | output | Non-inverting M-LVDS bus output of driver 1, rated for bus voltages from -1.4 V to 3.8 V. |
| 16 | 1Z | output | Inverting M-LVDS bus output of driver 1, rated for bus voltages from -1.4 V to 3.8 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | | 4 | V | | 4 |
| Input voltage range A, EN, EN | VI | -0.5 | | 4 | V | | 4 |
| Output voltage range Y, Z | VO | -1.8 | | 4 | V | | 4 |
| Junction temperature | TJ | | | 140 | °C | | 4 |
| Device power dissipation | PD | | | 288.5 | mW | EN = VCC, EN = GND, RL = 50Ω, 100MHz 50% duty cycle square wave 1A:4A, TA = 85°C | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | | 4 |
| High-level input voltage | VIH | 2 | | | V | upper limit printed as VCC | 4 |
| Low-level input voltage | VIL | 0 | | 0.8 | V | | 4 |
| Voltage at any bus terminal (separate or common mode) | VY or VZ | -1.4 | | 3.8 | V | | 4 |
| Differential load resistance | RL | 30 | | 55 | Ω | | 4 |
| Signaling rate | 1/tUI | | | 200 | Mbps | | 4 |
| Clock frequency | | | | 100 | MHz | | 4 |
| Junction temperature (operating) | TJ | -40 | | 125 | °C | | 4 |
| Junction-to-ambient thermal resistance | θJA | | | 128 | °C/W | Low-K board, no airflow, D package | 5 |
| Junction-to-board thermal resistance | θJB | | | 51.1 | °C/W | High-K board, D package | 5 |
| Junction-to-case thermal resistance | θJC | | | 45.4 | °C/W | D package | 5 |
| Supply current, driver enabled | ICC | | 59 | 70 | mA | EN = VCC, EN = GND, RL = 50Ω, all inputs = VCC or GND | 5 |
| Supply current, driver disabled | ICC | | 2 | 4 | mA | EN = GND, EN = VCC, RL = no load, all inputs = VCC or GND | 5 |
| High-level input current | /IIH/ | 0 | | 10 | μA | VIH = 2 V or VCC | 6 |
| Low-level input current | /IIL/ | 0 | | 10 | μA | VIL = GND or 0.8 V | 6 |
| Differential output voltage magnitude | /VYZ/ | 480 | | 650 | mV | See Figure 6-2 | 6 |
| Change in differential output voltage magnitude between logic states | Δ/VYZ/ | -50 | | 50 | mV | | 6 |
| Steady-state common-mode output voltage | VOS(SS) | 0.8 | | 1.2 | V | See Figure 6-3 | 6 |
| Change in steady-state common-mode output voltage between logic states | ΔVOS(SS) | -50 | | 50 | mV | | 6 |
| Peak-to-peak common-mode output voltage | VOS(PP) | | | 150 | mV | | 6 |
| Maximum steady-state open-circuit output voltage | VY(OC) | 0 | | 2.4 | V | See Figure 6-7 | 6 |
| Voltage overshoot, low-to-high level output | VP(H) | | | 1.2 | VSS | See Figure 6-5; limit printed as 1.2 VSS | 6 |
| Voltage overshoot, high-to-low level output | VP(L) | -0.2 | | | VSS | See Figure 6-5; limit printed as -0.2 VSS | 6 |
| Differential short-circuit output current magnitude | /IOS/ | | | 24 | mA | See Figure 6-4 | 6 |
| High-impedance state output current | IOZ | -15 | | 10 | μA | -1.4 V ≤ (VY or VZ) ≤ 3.8 V, other output = 1.2 V | 6 |
| Power-off output current | IO(OFF) | -10 | | 10 | μA | -1.4 V ≤ (VY or VZ) ≤ 3.8 V, other output = 1.2 V, VCC = 0 V | 6 |
| Output capacitance balance (CY/CZ) | CY/Z | 0.99 | | 1.01 | | | 6 |
| Input capacitance | Ci | | 5 | | pF | VI = 0.4 sin(30E6πt) + 0.5 V | 6 |
| Output capacitance | CY or CZ | | 3 | | pF | VY or VZ = 0.4 sin(30E6πt) + 0.5 V, other input at 1.2 V, driver disabled | 6 |
| Differential output capacitance | CYZ | | 2.5 | | pF | VYZ = 0.4 sin(30E6πt) V, driver disabled | 6 |
| Propagation delay time, low-to-high-level output | tPLH | 1 | 1.5 | 2.4 | ns | See Figure 6-5 | 7 |
| Propagation delay time, high-to-low-level output | tPHL | 1 | 1.5 | 2.4 | ns | See Figure 6-5 | 7 |
| Differential output signal rise time | tr | | 1 | 1.9 | ns | | 7 |
| Differential output signal fall time | tf | | 1 | 1.9 | ns | | 7 |
| Output skew | tsk(o) | | | 100 | ps | | 7 |
| Pulse skew (/tpHL - tpLH/) | tsk(p) | | 22 | 100 | ps | | 7 |
| Part-to-part skew | tsk(pp) | | | 600 | ps | | 7 |
| Period jitter, rms (1 standard deviation) | tjit(per) | | 0.2 | 1 | ps | All inputs, 100 MHz clock input | 7 |
| Cycle-to-cycle jitter | tjit(c-c) | | 5 | 36 | ps | All inputs, 100 MHz clock input | 7 |
| Peak-to-peak jitter | tjit(pp) | | 46 | 158 | ps | All inputs, 200 Mbps 2^15-1 PRBS input | 7 |
| Enable time, high-impedance-to-high-level output | tPZH | | | 9 | ns | See Figure 6-6 | 7 |
| Enable time, high-impedance-to-low-level output | tPZL | | | 9 | ns | See Figure 6-6 | 7 |
| Disable time, high-level-to-high-impedance output | tPHZ | | | 10 | ns | See Figure 6-6 | 7 |
| Disable time, low-level-to-high-impedance output | tPLZ | | | 10 | ns | See Figure 6-6 | 7 |
## CAD (KiCad official)
- Symbol: `SN65MLVD047AD`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `sn65mlvd047ad-etched.step` / `sn65mlvd047ad-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65mlvd047ad.step` / `sn65mlvd047ad.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn65mlvd047a.pdf) (26 pp, sha256 `2fcd322db9d3325d`, retrieved 2026-11-06, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn65mlvd047ad-datasheet.pdf)