component
SN65LVDT390PWR
Public Made by Adomby adom
Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# SN65LVDT390PWR++**Texas Instruments** · LVDS ICs · TSSOP-16++SN65LVDT390PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1A | input | Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 2 | 1B | input | Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 3 | 2A | input | Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 4 | 2B | input | Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 5 | 3A | input | Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 6 | 3B | input | Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 7 | 4A | input | Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 8 | 4B | input | Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum. |+| 9 | EN3,4 | input | Enable for channels 3 and 4; high enables the output, low forces the outputs to high impedance, and enable inputs are rated −0.5 V to 6 V with VIH ≥ 2 V and VIL ≤ 0.8 V. |+| 10 | 4Y | output | LVTTL output of channel 4; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA. |+| 11 | 3Y | output | LVTTL output of channel 3; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA. |+| 12 | GND | power_in | Ground reference for the device. |+| 13 | VCC | power_in | Supply voltage; recommended 3 V to 3.6 V (3.3 V nominal), absolute maximum −0.5 V to 4 V. |+| 14 | 2Y | output | LVTTL output of channel 2; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA. |+| 15 | 1Y | output | LVTTL output of channel 1; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA. |+| 16 | EN1,2 | input | Enable for channels 1 and 2; high enables the output, low forces the outputs to high impedance, and enable inputs are rated −0.5 V to 6 V with VIH ≥ 2 V and VIL ≤ 0.8 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `SN65LVDT390PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `sn65lvdt390pwr-etched.step` / `sn65lvdt390pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65lvdt390pwr.step` / `sn65lvdt390pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn65lvdt390.pdf) (48 pp, sha256 `6c5cbf83c73b9efd`, retrieved 2026-10-07, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sn65lvdt390pwr-datasheet.pdf)
page.jsonadded+247@@ -0,0 +1,247 @@+{+ "slug": "sn65lvdt390pwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "sn65lvdt390pwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sn65lvdt390pwr.kicad_sym",+ "sn65lvdt390pwr.kicad_mod",+ "sn65lvdt390pwr.glb",+ "sn65lvdt390pwr.step",+ "sn65lvdt390pwr.lbr",+ "docs/hero.png",+ "docs/sn65lvdt390pwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "sn65lvdt390pwr-hero.glb",+ "sn65lvdt390pwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "SN65LVDT390PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Interface",+ "subcategory": "LVDS ICs",+ "datasheet": "https://www.ti.com/lit/ds/symlink/sn65lvdt390.pdf",+ "parts": {+ "symbol": "sn65lvdt390pwr.kicad_sym",+ "footprint": "sn65lvdt390pwr.kicad_mod",+ "model_3d": "sn65lvdt390pwr-hero.glb",+ "model_3d_plain": "sn65lvdt390pwr.glb",+ "model_3d_step": "sn65lvdt390pwr-etched.step",+ "model_3d_step_plain": "sn65lvdt390pwr.step",+ "lbr": "sn65lvdt390pwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C702020",+ "digikey": "296-46334-2-ND",+ "mouser": "595-SN65LVDT390PWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T22:01:46Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-46334-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-SN65LVDT390PWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "1A",+ "type": "input",+ "description": "Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "2",+ "name": "1B",+ "type": "input",+ "description": "Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "3",+ "name": "2A",+ "type": "input",+ "description": "Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "4",+ "name": "2B",+ "type": "input",+ "description": "Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "5",+ "name": "3A",+ "type": "input",+ "description": "Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "6",+ "name": "3B",+ "type": "input",+ "description": "Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "7",+ "name": "4A",+ "type": "input",+ "description": "Differential (LVDS) non-inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "8",+ "name": "4B",+ "type": "input",+ "description": "Differential (LVDS) inverting receiver input; the A and B inputs are rated −0.5 V to 4 V absolute maximum."+ },+ {+ "number": "9",+ "name": "EN3,4",+ "type": "input",+ "description": "Enable for channels 3 and 4; high enables the output, low forces the outputs to high impedance, and enable inputs are rated −0.5 V to 6 V with VIH ≥ 2 V and VIL ≤ 0.8 V."+ },+ {+ "number": "10",+ "name": "4Y",+ "type": "output",+ "description": "LVTTL output of channel 4; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA."+ },+ {+ "number": "11",+ "name": "3Y",+ "type": "output",+ "description": "LVTTL output of channel 3; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA."+ },+ {+ "number": "12",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "13",+ "name": "VCC",+ "type": "power_in",+ "description": "Supply voltage; recommended 3 V to 3.6 V (3.3 V nominal), absolute maximum −0.5 V to 4 V."+ },+ {+ "number": "14",+ "name": "2Y",+ "type": "output",+ "description": "LVTTL output of channel 2; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA."+ },+ {+ "number": "15",+ "name": "1Y",+ "type": "output",+ "description": "LVTTL output of channel 1; recommended output current is −8 mA to 8 mA, absolute maximum −12 mA to 12 mA."+ },+ {+ "number": "16",+ "name": "EN1,2",+ "type": "input",+ "description": "Enable for channels 1 and 2; high enables the output, low forces the outputs to high impedance, and enable inputs are rated −0.5 V to 6 V with VIH ≥ 2 V and VIL ≤ 0.8 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers and names come from the 'Pin Functions: SNx5LVDx390' table on page 5, which applies to t; Input descriptions give the absolute-maximum range for the A/B inputs (−0.5 V to 4 V). The datasheet; Pin types are assigned to KiCad ERC classes: the LVDS A/B inputs and enables as input, LVTTL Y outpu"+ ],+ "pages_sent": 20,+ "cost_usd": 0.1217,+ "at": "2026-10-07T22:01:29"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/sn65lvdt390.pdf",+ "pages": 48,+ "sha256": "6c5cbf83c73b9efd",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "sn65lvdt390pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sn65lvdt390pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "aa303ea5a432017ffebc4e317580342a4e6900bd855cfe1f067cb68246a69110",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}