main
Ray
Publish 0.1.0
69a2a3b
SN65LVDS9637DGK
Texas Instruments · Pre-ordered Chips · VSSOP-8
SN65LVDS9637DGK from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage; recommended range is 3 V to 3.6 V (3.3 V nominal), with an absolute maximum of -0.5 V to 4 V. |
| 2 | 1Y | output | LVTTL output signal for channel 1; absolute maximum output range is -0.5 V to VCC + 0.5 V. |
| 3 | 2Y | output | LVTTL output signal for channel 2; absolute maximum output range is -0.5 V to VCC + 0.5 V. |
| 4 | GND | power_in | Ground; the network ground terminal to which all voltages except differential bus voltages are referenced. |
| 5 | 2B | input | Differential (LVDS) inverting input for channel 2; recommended |
| 6 | 2A | input | Differential (LVDS) non-inverting input for channel 2; recommended |
| 7 | 1B | input | Differential (LVDS) inverting input for channel 1; recommended |
| 8 | 1A | input | Differential (LVDS) non-inverting input for channel 1; recommended |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive-going differential input voltage threshold | VIT+ | 100 | mV | See Figure 7 and Table 1 | 9 | ||
| Negative-going differential input voltage threshold | VIT- | -100 | mV | See Figure 7 and Table 1 | 9 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 9 | ||
| High-level output voltage | VOH | 2.8 | V | IOH = -4 mA | 9 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 8 mA | 9 | ||
| Supply current | ICC | 5.5 | 10 | mA | No load | 9 | |
| Input current (A or B inputs) | II | -20 | -10 | -2 | μA | VI = 0 | 9 |
| Input current (A or B inputs) | II | -3 | -1.2 | μA | VI = 2.4 V | 9 | |
| Power-off input current (A or B input) | II(OFF) | 6 | 20 | μA | VCC = 0, VI = 3.6 V | 9 | |
| High-impedance output current | IOZ | -10 | 10 | μA | VO = 0 or VCC | 9 | |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 7 | |
| Magnitude of differential input voltage | /VID/ | 0.1 | 0.6 | V | 7 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | SN65 prefix | 7 | |
| Supply voltage range | VCC | -0.5 | 4 | V | 7 | ||
| Input voltage range, A or B | VI | -0.5 | 4 | V | A or B | 7 | |
| Input voltage range, enables and output | VI | -0.5 | V | Enables and output; upper limit printed as VCC + 0.5 V | 7 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Propagation delay time, low-to-high-level output | tPLH | 1.5 | 2.1 | 3 | ns | CL = 10 pF, See Figure 8 | 10 |
| Propagation delay time, high-to-low-level output | tPHL | 1.5 | 2.1 | 3 | ns | CL = 10 pF, See Figure 8 | 10 |
| Pulse skew (/tPHL, tPLH/) | tsk(p) | 0 | 0.4 | ns | CL = 10 pF, See Figure 8 | 10 | |
| Channel-to-channel output skew | tsk(o) | 0.1 | 0.3 | ns | CL = 10 pF, See Figure 8 | 10 | |
| Part-to-part skew | tsk(pp) | 1 | ns | 10 | |||
| Propagation delay time, high-level-to-high-impedance output | tPHZ | 6.5 | 12 | ns | See Figure 9 | 10 | |
| Propagation delay time, low-level-to-high-impedance output | tPLZ | 5.5 | 12 | ns | See Figure 9 | 10 | |
| Propagation delay time, high-impedance-to-high-level output | tPZH | 8 | 12 | ns | See Figure 9 | 10 | |
| Propagation delay time, high-impedance-to-low-level output | tPZL | 3 | 12 | ns | See Figure 9 | 10 | |
| Power rating (DGK package) | 425 | mW | TA ≤ 25°C | 8 | |||
| Power rating (DGK package) | 272 | mW | TA ≤ 70°C | 8 | |||
| Power rating (DGK package) | 221 | mW | TA ≤ 85°C | 8 | |||
| Output signal rise time, 20% to 80% | tr | 0.6 | ns | CL = 10 pF, See Figure 8 | 10 | ||
| Output signal fall time, 80% to 20% | tf | 0.7 | ns | CL = 10 pF, See Figure 8 | 10 | ||
| Derating factor above TA = 25°C (DGK package) | 3.4 | mW/°C | Above TA = 25°C | 8 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
SN65LVDS9637DGK - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sn65lvds9637dgk-etched.step/sn65lvds9637dgk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds9637dgk.step/sn65lvds9637dgk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (55 pp, sha256
890e33b3bb5c4e86, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# SN65LVDS9637DGK
**Texas Instruments** · Pre-ordered Chips · VSSOP-8
SN65LVDS9637DGK from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage; recommended range is 3 V to 3.6 V (3.3 V nominal), with an absolute maximum of -0.5 V to 4 V. |
| 2 | 1Y | output | LVTTL output signal for channel 1; absolute maximum output range is -0.5 V to VCC + 0.5 V. |
| 3 | 2Y | output | LVTTL output signal for channel 2; absolute maximum output range is -0.5 V to VCC + 0.5 V. |
| 4 | GND | power_in | Ground; the network ground terminal to which all voltages except differential bus voltages are referenced. |
| 5 | 2B | input | Differential (LVDS) inverting input for channel 2; recommended |VID| is 0.1 V to 0.6 V, and the absolute input voltage range is -0.5 V to 4 V. |
| 6 | 2A | input | Differential (LVDS) non-inverting input for channel 2; recommended |VID| is 0.1 V to 0.6 V, and the absolute input voltage range is -0.5 V to 4 V. |
| 7 | 1B | input | Differential (LVDS) inverting input for channel 1; recommended |VID| is 0.1 V to 0.6 V, and the absolute input voltage range is -0.5 V to 4 V. |
| 8 | 1A | input | Differential (LVDS) non-inverting input for channel 1; recommended |VID| is 0.1 V to 0.6 V, and the absolute input voltage range is -0.5 V to 4 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Interface ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive-going differential input voltage threshold | VIT+ | | | 100 | mV | See Figure 7 and Table 1 | 9 |
| Negative-going differential input voltage threshold | VIT- | -100 | | | mV | See Figure 7 and Table 1 | 9 |
| High-level output voltage | VOH | 2.4 | | | V | IOH = -8 mA | 9 |
| High-level output voltage | VOH | 2.8 | | | V | IOH = -4 mA | 9 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 8 mA | 9 |
| Supply current | ICC | | 5.5 | 10 | mA | No load | 9 |
| Input current (A or B inputs) | II | -20 | -10 | -2 | μA | VI = 0 | 9 |
| Input current (A or B inputs) | II | -3 | | -1.2 | μA | VI = 2.4 V | 9 |
| Power-off input current (A or B input) | II(OFF) | | 6 | 20 | μA | VCC = 0, VI = 3.6 V | 9 |
| High-impedance output current | IOZ | -10 | | 10 | μA | VO = 0 or VCC | 9 |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | | 7 |
| Magnitude of differential input voltage | /VID/ | 0.1 | | 0.6 | V | | 7 |
| Operating free-air temperature | TA | -40 | | 85 | °C | SN65 prefix | 7 |
| Supply voltage range | VCC | -0.5 | | 4 | V | | 7 |
| Input voltage range, A or B | VI | -0.5 | | 4 | V | A or B | 7 |
| Input voltage range, enables and output | VI | -0.5 | | | V | Enables and output; upper limit printed as VCC + 0.5 V | 7 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 7 |
| Propagation delay time, low-to-high-level output | tPLH | 1.5 | 2.1 | 3 | ns | CL = 10 pF, See Figure 8 | 10 |
| Propagation delay time, high-to-low-level output | tPHL | 1.5 | 2.1 | 3 | ns | CL = 10 pF, See Figure 8 | 10 |
| Pulse skew (/tPHL, tPLH/) | tsk(p) | | 0 | 0.4 | ns | CL = 10 pF, See Figure 8 | 10 |
| Channel-to-channel output skew | tsk(o) | | 0.1 | 0.3 | ns | CL = 10 pF, See Figure 8 | 10 |
| Part-to-part skew | tsk(pp) | | | 1 | ns | | 10 |
| Propagation delay time, high-level-to-high-impedance output | tPHZ | | 6.5 | 12 | ns | See Figure 9 | 10 |
| Propagation delay time, low-level-to-high-impedance output | tPLZ | | 5.5 | 12 | ns | See Figure 9 | 10 |
| Propagation delay time, high-impedance-to-high-level output | tPZH | | 8 | 12 | ns | See Figure 9 | 10 |
| Propagation delay time, high-impedance-to-low-level output | tPZL | | 3 | 12 | ns | See Figure 9 | 10 |
| Power rating (DGK package) | | | | 425 | mW | TA ≤ 25°C | 8 |
| Power rating (DGK package) | | | | 272 | mW | TA ≤ 70°C | 8 |
| Power rating (DGK package) | | | | 221 | mW | TA ≤ 85°C | 8 |
| Output signal rise time, 20% to 80% | tr | | 0.6 | | ns | CL = 10 pF, See Figure 8 | 10 |
| Output signal fall time, 80% to 20% | tf | | 0.7 | | ns | CL = 10 pF, See Figure 8 | 10 |
| Derating factor above TA = 25°C (DGK package) | | | 3.4 | | mW/°C | Above TA = 25°C | 8 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `SN65LVDS9637DGK`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sn65lvds9637dgk-etched.step` / `sn65lvds9637dgk-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65lvds9637dgk.step` / `sn65lvds9637dgk.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn65lvds9637.pdf) (55 pp, sha256 `890e33b3bb5c4e86`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/sn65lvds9637dgk-datasheet.pdf)