main
Ray
Publish 0.1.0
4d38b92
SN65LVDS180DR
Texas Instruments · LVDS ICs · SOIC-14
SN65LVDS180DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet recommends grounding NC pins at the board level for optimum thermal performance. |
| 2 | R | output | LVTTL receiver output that is high for VID ≥ 100 mV and low for VID ≤ -100 mV, with VOH of at least 2.4 V at IOH = -8 mA and VOL of at most 0.4 V at IOL = 8 mA, and it goes high-impedance when RE/ is high. |
| 3 | RE | input | Active-low receiver enable (printed RE/); when it is high the receiver output R is placed in the high-impedance state. |
| 4 | DE | input | Driver enable input; when it is low the driver outputs Y and Z are turned off (no output) and the driver input is disconnected. |
| 5 | D | input | LVTTL driver data input with VIH of at least 2 V and VIL of at most 0.8 V, tolerant of input signals up to 5 V, where an open input drives a low output. |
| 6 | GND | power_in | Ground reference for the device, to be connected with a short, low-impedance path to the PCB ground plane to reduce ground bounce. |
| 7 | GND | power_in | Ground reference for the device, to be connected with a short, low-impedance path to the PCB ground plane to reduce ground bounce. |
| 8 | NC | unconnected | No internal connection; the datasheet recommends grounding NC pins at the board level for optimum thermal performance. |
| 9 | Y | output | Differential LVDS non-inverting driver output with |
| 10 | Z | output | Differential LVDS inverting driver output with |
| 11 | B | input | Differential LVDS inverting receiver input; the receiver switches at VIT+ and VIT- of ±100 mV and is specified for a differential input magnitude of 0.05 V to 0.6 V. |
| 12 | A | input | Differential LVDS non-inverting receiver input; the receiver switches at VIT+ and VIT- of ±100 mV and is specified for a differential input magnitude of 0.05 V to 0.6 V. |
| 13 | VCC | power_in | Supply voltage, 3.0 V minimum, 3.3 V nominal and 3.6 V maximum, with an absolute maximum of 4 V. |
| 14 | VCC | power_in | Supply voltage, 3.0 V minimum, 3.3 V nominal and 3.6 V maximum, with an absolute maximum of 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 4 | V | 6 | ||
| Voltage range, D, R, DE, RE | -0.5 | 6 | V | 6 | |||
| Voltage range, Y, Z, A, B | -0.5 | 4 | V | 6 | |||
| Differential output voltage | /VOD/ | 1 | V | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Lead temperature | 250 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 6 | |||
| ESD, bus pins Y, Z, A, B and GND, Class 3, A | V(ESD) | -12000 | 12000 | V | Y, Z, A, B, and GND; Class 3, A | 6 | |
| ESD, bus pins Y, Z, A, B and GND, Class 3, B | V(ESD) | -600 | 600 | V | Y, Z, A, B, and GND; Class 3, B | 6 | |
| ESD, all pins, Class 3, A | V(ESD) | -7000 | 7000 | V | All pins; Class 3, A | 6 | |
| ESD, all pins, Class 3, B | V(ESD) | -500 | 500 | V | All pins; Class 3, B | 6 | |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 7 | |
| High-level input voltage | VIH | 2 | V | 7 | |||
| Low-level input voltage | VIL | 0.8 | V | 7 | |||
| Magnitude of differential input voltage | /VID/ | 0.05 | 0.6 | V | 7 | ||
| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | 520 | mV | 7 | |||
| Driver output voltage | VOY or VOZ | 0 | 2.4 | V | 7 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 7 | ||
| Power rating | 987 | mW | TA ≤ 25°C; SOIC D, 14 pins | 7 | |||
| Power rating | 513 | mW | TA = 85°C; SOIC D, 14 pins | 7 | |||
| Supply current, driver and receiver enabled | ICC | 9 | 12 | mA | Driver and receiver enabled, no receiver load, driver RL = 100 Ω | 7 | |
| Supply current, driver enabled, receiver disabled | ICC | 5 | 7 | mA | Driver enabled, receiver disabled, RL = 100 Ω | 7 | |
| Supply current, driver disabled, receiver enabled | ICC | 1.5 | 2 | mA | Driver disabled, receiver enabled, no load | 7 | |
| Supply current, disabled | ICC | 0.5 | 1 | mA | Disabled | 7 | |
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | RL = 100 Ω, See Figure 11 and Figure 12 | 8 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | 50 | mV | 8 | ||
| Steady-state common-mode output voltage | VOC(SS) | 1.125 | 1.2 | 1.375 | V | See Figure 12 | 8 |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | 50 | mV | 8 | ||
| Peak-to-peak common-mode output voltage | VOC(PP) | 50 | 150 | mV | 8 | ||
| High-level input current, DE | IIH | -0.5 | -20 | µA | VIH = 5 V | 8 | |
| High-level input current, D | IIH | 2 | 20 | µA | VIH = 5 V | 8 | |
| Low-level input current, DE | IIL | -0.5 | -10 | µA | VIL = 0.8 V | 8 | |
| Low-level input current, D | IIL | 2 | 10 | µA | VIL = 0.8 V | 8 | |
| Short-circuit output current | IOS | 3 | 10 | mA | VOY or VOZ = 0 V | 8 | |
| Off-state output current | IO(OFF) | -1 | 1 | µA | DE = 0 V, VOY = VOZ = 0 V; DE = VCC, VCC < 1.5 V, VOY = VOZ = 0 V | 8 | |
| Positive-going differential input voltage threshold | VIT+ | 100 | mV | See Figure 14 and Table 2 | 8 | ||
| Negative-going differential input voltage threshold | VIT- | -100 | mV | See Figure 14 and Table 2 | 8 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 8 | ||
| High-level output voltage | VOH | 2.8 | V | IOH = -4 mA | 8 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 8 mA | 8 | ||
| Input current (A or B input) | II | -2 | -11 | -20 | µA | VI = 0 V | 8 |
| Input current (A or B input) | II | -1.2 | -3 | µA | VI = 2.4 V | 8 | |
| Power-off input current (A or B input) | II(OFF) | -20 | 20 | µA | VCC = 0 V | 8 | |
| High-level input current (enables) | IIH | -10 | 10 | µA | VIH = 5 V | 8 | |
| Low-level input current (enables) | IIL | -10 | 10 | µA | VIL = 0.8 V | 8 | |
| High-impedance output current | IOZ | -10 | 10 | µA | VO = 0 or 5 V | 8 | |
| Propagation delay time, low-to-high-level output (driver) | tPLH | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 | |
| Propagation delay time, high-to-low-level output (driver) | tPHL | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 | |
| Differential output signal rise time | tr | 0.8 | 1 | ns | 9 | ||
| Differential output signal fall time | tf | 0.8 | 1 | ns | 9 | ||
| Pulse skew (/tpHL, tpLH/) | tsk(p) | 300 | ps | 9 | |||
| Channel-to-channel output skew | tsk(o) | 150 | ps | 9 | |||
| Enable time | ten | 4.3 | 10 | ns | See Figure 13 | 9 | |
| Disable time | tdis | 3.1 | 10 | ns | 9 | ||
| Propagation delay time, low-to-high-level output (receiver) | tPLH | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 | |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 | |
| Pulse skew (/tpHL, tpLH/) (receiver) | tsk(p) | 0.3 | ns | 9 | |||
| Output signal rise time (receiver) | tr | 0.7 | 1.5 | ns | 9 | ||
| Output signal fall time (receiver) | tf | 0.9 | 1.5 | ns | 9 | ||
| Propagation delay time, high-impedance-to-high-level output | tPZH | 2.5 | ns | See Figure 16 | 9 |
CAD (KiCad official)
- Symbol:
SN65LVDS180DR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
sn65lvds180dr-etched.step/sn65lvds180dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvds180dr.step/sn65lvds180dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
69be50e0c02c6e8a, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN65LVDS180DR
**Texas Instruments** · LVDS ICs · SOIC-14
SN65LVDS180DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the datasheet recommends grounding NC pins at the board level for optimum thermal performance. |
| 2 | R | output | LVTTL receiver output that is high for VID ≥ 100 mV and low for VID ≤ -100 mV, with VOH of at least 2.4 V at IOH = -8 mA and VOL of at most 0.4 V at IOL = 8 mA, and it goes high-impedance when RE/ is high. |
| 3 | RE | input | Active-low receiver enable (printed RE/); when it is high the receiver output R is placed in the high-impedance state. |
| 4 | DE | input | Driver enable input; when it is low the driver outputs Y and Z are turned off (no output) and the driver input is disconnected. |
| 5 | D | input | LVTTL driver data input with VIH of at least 2 V and VIL of at most 0.8 V, tolerant of input signals up to 5 V, where an open input drives a low output. |
| 6 | GND | power_in | Ground reference for the device, to be connected with a short, low-impedance path to the PCB ground plane to reduce ground bounce. |
| 7 | GND | power_in | Ground reference for the device, to be connected with a short, low-impedance path to the PCB ground plane to reduce ground bounce. |
| 8 | NC | unconnected | No internal connection; the datasheet recommends grounding NC pins at the board level for optimum thermal performance. |
| 9 | Y | output | Differential LVDS non-inverting driver output with |VOD| of 247 mV minimum, 340 mV typical and 454 mV maximum into a 100-Ω load. |
| 10 | Z | output | Differential LVDS inverting driver output with |VOD| of 247 mV minimum, 340 mV typical and 454 mV maximum into a 100-Ω load. |
| 11 | B | input | Differential LVDS inverting receiver input; the receiver switches at VIT+ and VIT- of ±100 mV and is specified for a differential input magnitude of 0.05 V to 0.6 V. |
| 12 | A | input | Differential LVDS non-inverting receiver input; the receiver switches at VIT+ and VIT- of ±100 mV and is specified for a differential input magnitude of 0.05 V to 0.6 V. |
| 13 | VCC | power_in | Supply voltage, 3.0 V minimum, 3.3 V nominal and 3.6 V maximum, with an absolute maximum of 4 V. |
| 14 | VCC | power_in | Supply voltage, 3.0 V minimum, 3.3 V nominal and 3.6 V maximum, with an absolute maximum of 4 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | | 4 | V | | 6 |
| Voltage range, D, R, DE, RE | | -0.5 | | 6 | V | | 6 |
| Voltage range, Y, Z, A, B | | -0.5 | | 4 | V | | 6 |
| Differential output voltage | /VOD/ | | | 1 | V | | 6 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 6 |
| Lead temperature | | | | 250 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 6 |
| ESD, bus pins Y, Z, A, B and GND, Class 3, A | V(ESD) | -12000 | | 12000 | V | Y, Z, A, B, and GND; Class 3, A | 6 |
| ESD, bus pins Y, Z, A, B and GND, Class 3, B | V(ESD) | -600 | | 600 | V | Y, Z, A, B, and GND; Class 3, B | 6 |
| ESD, all pins, Class 3, A | V(ESD) | -7000 | | 7000 | V | All pins; Class 3, A | 6 |
| ESD, all pins, Class 3, B | V(ESD) | -500 | | 500 | V | All pins; Class 3, B | 6 |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | | 7 |
| High-level input voltage | VIH | 2 | | | V | | 7 |
| Low-level input voltage | VIL | | | 0.8 | V | | 7 |
| Magnitude of differential input voltage | /VID/ | 0.05 | | 0.6 | V | | 7 |
| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | | | 520 | mV | | 7 |
| Driver output voltage | VOY or VOZ | 0 | | 2.4 | V | | 7 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 7 |
| Power rating | | | | 987 | mW | TA ≤ 25°C; SOIC D, 14 pins | 7 |
| Power rating | | | | 513 | mW | TA = 85°C; SOIC D, 14 pins | 7 |
| Supply current, driver and receiver enabled | ICC | | 9 | 12 | mA | Driver and receiver enabled, no receiver load, driver RL = 100 Ω | 7 |
| Supply current, driver enabled, receiver disabled | ICC | | 5 | 7 | mA | Driver enabled, receiver disabled, RL = 100 Ω | 7 |
| Supply current, driver disabled, receiver enabled | ICC | | 1.5 | 2 | mA | Driver disabled, receiver enabled, no load | 7 |
| Supply current, disabled | ICC | | 0.5 | 1 | mA | Disabled | 7 |
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | RL = 100 Ω, See Figure 11 and Figure 12 | 8 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | | 50 | mV | | 8 |
| Steady-state common-mode output voltage | VOC(SS) | 1.125 | 1.2 | 1.375 | V | See Figure 12 | 8 |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | | 50 | mV | | 8 |
| Peak-to-peak common-mode output voltage | VOC(PP) | | 50 | 150 | mV | | 8 |
| High-level input current, DE | IIH | | -0.5 | -20 | µA | VIH = 5 V | 8 |
| High-level input current, D | IIH | | 2 | 20 | µA | VIH = 5 V | 8 |
| Low-level input current, DE | IIL | | -0.5 | -10 | µA | VIL = 0.8 V | 8 |
| Low-level input current, D | IIL | | 2 | 10 | µA | VIL = 0.8 V | 8 |
| Short-circuit output current | IOS | | 3 | 10 | mA | VOY or VOZ = 0 V | 8 |
| Off-state output current | IO(OFF) | -1 | | 1 | µA | DE = 0 V, VOY = VOZ = 0 V; DE = VCC, VCC < 1.5 V, VOY = VOZ = 0 V | 8 |
| Positive-going differential input voltage threshold | VIT+ | | | 100 | mV | See Figure 14 and Table 2 | 8 |
| Negative-going differential input voltage threshold | VIT- | -100 | | | mV | See Figure 14 and Table 2 | 8 |
| High-level output voltage | VOH | 2.4 | | | V | IOH = -8 mA | 8 |
| High-level output voltage | VOH | 2.8 | | | V | IOH = -4 mA | 8 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 8 mA | 8 |
| Input current (A or B input) | II | -2 | -11 | -20 | µA | VI = 0 V | 8 |
| Input current (A or B input) | II | | -1.2 | -3 | µA | VI = 2.4 V | 8 |
| Power-off input current (A or B input) | II(OFF) | -20 | | 20 | µA | VCC = 0 V | 8 |
| High-level input current (enables) | IIH | -10 | | 10 | µA | VIH = 5 V | 8 |
| Low-level input current (enables) | IIL | -10 | | 10 | µA | VIL = 0.8 V | 8 |
| High-impedance output current | IOZ | -10 | | 10 | µA | VO = 0 or 5 V | 8 |
| Propagation delay time, low-to-high-level output (driver) | tPLH | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 |
| Propagation delay time, high-to-low-level output (driver) | tPHL | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 11 | 9 |
| Differential output signal rise time | tr | | 0.8 | 1 | ns | | 9 |
| Differential output signal fall time | tf | | 0.8 | 1 | ns | | 9 |
| Pulse skew (/tpHL, tpLH/) | tsk(p) | | | 300 | ps | | 9 |
| Channel-to-channel output skew | tsk(o) | | | 150 | ps | | 9 |
| Enable time | ten | | 4.3 | 10 | ns | See Figure 13 | 9 |
| Disable time | tdis | | 3.1 | 10 | ns | | 9 |
| Propagation delay time, low-to-high-level output (receiver) | tPLH | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 15 | 9 |
| Pulse skew (/tpHL, tpLH/) (receiver) | tsk(p) | | | 0.3 | ns | | 9 |
| Output signal rise time (receiver) | tr | | 0.7 | 1.5 | ns | | 9 |
| Output signal fall time (receiver) | tf | | 0.9 | 1.5 | ns | | 9 |
| Propagation delay time, high-impedance-to-high-level output | tPZH | | | 2.5 | ns | See Figure 16 | 9 |
## CAD (KiCad official)
- Symbol: `SN65LVDS180DR`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `sn65lvds180dr-etched.step` / `sn65lvds180dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65lvds180dr.step` / `sn65lvds180dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn65lvds180.pdf) (56 pp, sha256 `69be50e0c02c6e8a`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn65lvds180dr-datasheet.pdf)