← Commit history
Publish 0.1.5
4 files changed
+49−50
README.md+36−38@@ -40,23 +40,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage range (VCC) | VCC | -0.5 | | 4 | V | | 4 |-| Voltage range, D, R, DE, RE | | -0.5 | | 6 | V | | 4 |-| Voltage range, Y, Z, A and B | | -0.5 | | 4 | V | | 4 |-| Differential output voltage | /VOD/ | | | 1 | V | | 4 |-| ESD, Y, Z, A, B and GND, Class 3 A | | | | 12 | kV | Class 3, A | 4 |-| ESD, Y, Z, A, B and GND, Class 3 B | | | | 600 | V | Class 3, B | 4 |-| ESD, all pins, Class 3 A | | | | 7 | kV | Class 3, A | 4 |-| ESD, all pins, Class 3 B | | | | 500 | V | Class 3, B | 4 |-| Storage temperature range | | -65 | | 150 | °C | | 4 |-| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | | 4 |-| High-level input voltage | VIH | 2 | | | V | | 4 |-| Low-level input voltage | VIL | | | 0.8 | V | | 4 |-| Magnitude of differential input voltage | /VID/ | 0.1 | | 0.6 | V | | 4 |-| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | | | 520 | mV | | 4 |-| Driver output voltage | VOY or VOZ | 0 | | 2.4 | V | | 4 |-| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |-| Supply current, drivers and receivers enabled, no receiver loads | ICC | | 12 | 20 | mA | Drivers and receivers enabled, no receiver loads, driver RL = 100 Ω | 5 |+| Supply current, drivers and receivers enabled | ICC | | 12 | 20 | mA | Drivers and receivers enabled, no receiver loads, driver RL = 100 Ω | 5 | | Supply current, drivers enabled, receivers disabled | ICC | | 10 | 16 | mA | Drivers enabled, receivers disabled, RL = 100 Ω | 5 | | Supply current, drivers disabled, receivers enabled | ICC | | 3 | 6 | mA | Drivers disabled, receivers enabled, no loads | 5 | | Supply current, disabled | ICC | | 0.5 | 1 | mA | Disabled | 5 |@@ -65,40 +49,54 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Steady-state common-mode output voltage | VOC(SS) | 1.125 | 1.2 | 1.375 | V | | 5 | | Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | | 50 | mV | See Figure 3 | 5 | | Peak-to-peak common-mode output voltage | VOC(PP) | | 50 | 150 | mV | | 5 |-| High-level input current, DE | IIH | | -0.5 | -20 | μA | VIH = 5 V | 5 |-| High-level input current, D | IIH | | 2 | 20 | μA | VIH = 5 V | 5 |-| Low-level input current, DE | IIL | | -0.5 | -10 | μA | VIL = 0.8 V | 5 |-| Low-level input current, D | IIL | | 2 | 10 | μA | VIL = 0.8 V | 5 |-| Short-circuit output current | IOS | | 3 | 10 | mA | VOY or VOZ = 0 V | 5 |-| Off-state output current | IO(OFF) | -1 | | 1 | μA | DE = 0 V / VCC; VOY = VOZ = 0 V; VCC < 1.5 V | 5 |+| High-level input current, DE | IIH | -20 | | -0.5 | μA | VIH = 5 V | 5 |+| High-level input current, D | IIH | 2 | | 20 | μA | VIH = 5 V | 5 |+| Low-level input current, DE | IIL | -10 | | -0.5 | μA | VIL = 0.8 V | 5 |+| Low-level input current, D | IIL | 2 | | 10 | μA | VIL = 0.8 V | 5 |+| Short-circuit output current | IOS | 3 | | 10 | mA | VOY or VOZ = 0 V | 5 |+| Off-state output current | IO(OFF) | -1 | | 1 | μA | DE = 0 V or VCC, VOY = VOZ = 0 V, VCC < 1.5 V | 5 | | Positive-going differential input voltage threshold | VIT+ | | | 50 | mV | See Figure 5 | 6 | | Negative-going differential input voltage threshold | VIT- | -50 | | | mV | See Figure 5 | 6 | | High-level output voltage | VOH | 2.4 | | | V | IOH = -8 mA | 6 | | High-level output voltage | VOH | 2.8 | | | V | IOH = -4 mA | 6 | | Low-level output voltage | VOL | | | 0.4 | V | IOL = 8 mA | 6 | | Input current (A or B inputs) | II | -2 | -11 | -20 | μA | VI = 0 | 6 |-| Input current (A or B inputs) | II | | -1.2 | -3 | μA | VI = 2.4 V | 6 |+| Input current (A or B inputs) | II | -1.2 | | -3 | μA | VI = 2.4 V | 6 | | Power-off input current (A or B inputs) | II(OFF) | -20 | | 20 | μA | VCC = 0 | 6 | | High-level input current (enables) | IIH | -10 | | 10 | μA | VIH = 5 V | 6 | | Low-level input current (enables) | IIL | -10 | | 10 | μA | VIL = 0.8 V | 6 | | High-impedance output current | IOZ | -10 | | 10 | μA | VO = 0 or 5 V | 6 |-| Driver propagation delay time, low-to-high-level output | tPLH | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 |-| Driver propagation delay time, high-to-low-level output | tPHL | | 1.7 | 2.7 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 |+| Propagation delay time, low-to-high-level output (driver) | tPLH | | 1.7 | 2.7 | ns | | 6 |+| Propagation delay time, high-to-low-level output (driver) | tPHL | | 1.7 | 2.7 | ns | | 6 | | Differential output signal rise time | tr | | 0.8 | 1 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 | | Differential output signal fall time | tf | | 0.8 | 1 | ns | RL = 100 Ω, CL = 10 pF, See Figure 2 | 6 |-| Pulse skew (/tpHL - tpLH/) | tsk(p) | | | 300 | ps | | 6 |+| Pulse skew (/tPHL - tPLH/) (driver) | tsk(p) | | | 300 | ps | | 6 | | Channel-to-channel output skew | tsk(o) | | | 150 | ps | | 6 |-| Enable time | ten | | 4.3 | 10 | ns | See Figure 4 | 6 |-| Disable time | tdis | | 3.1 | 10 | ns | See Figure 4 | 6 |-| Receiver propagation delay time, low-to-high-level output | tPLH | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 6 | 6 |-| Receiver propagation delay time, high-to-low-level output | tPHL | | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 6 | 6 |-| Receiver pulse skew (/tpHL - tpLH/) | tsk(p) | | | 0.3 | ns | CL = 10 pF, See Figure 6 | 6 |-| Receiver output signal rise time | tr | | 0.7 | 1.5 | ns | CL = 10 pF, See Figure 6 | 6 |-| Receiver output signal fall time | tf | | 0.9 | 1.5 | ns | CL = 10 pF, See Figure 6 | 6 |-| Propagation delay time, high-impedance-to-high-level output | tPZH | | | 2.5 | ns | See Figure 7 | 6 |-| Propagation delay time, high-impedance-to-low-level output | tPZL | | | 2.5 | ns | See Figure 7 | 6 |-| Propagation delay time, high-level-to-high-impedance output | tPHZ | | | 7 | ns | See Figure 7 | 6 |-| Propagation delay time, low-level-to-high-impedance output | tPLZ | | | 4 | ns | See Figure 7 | 6 |+| Enable time (driver) | ten | | 4.3 | 10 | ns | See Figure 4 | 6 |+| Disable time (driver) | tdis | | 3.1 | 10 | ns | See Figure 4 | 6 |+| Propagation delay time, low-to-high-level output (receiver) | tPLH | | 3.7 | 4.5 | ns | CL = 10 pF | 6 |+| Propagation delay time, high-to-low-level output (receiver) | tPHL | | 3.7 | 4.5 | ns | CL = 10 pF | 6 |+| Output signal rise time (receiver) | tr | | 0.7 | 1.5 | ns | CL = 10 pF | 6 |+| Output signal fall time (receiver) | tf | | 0.9 | 1.5 | ns | CL = 10 pF | 6 |+| Supply voltage | VCC | -0.5 | | 4 | V | All voltage values except differential I/O bus voltages are with respect to network ground | 4 |+| Voltage range, D, R, DE, RE | VI | -0.5 | | 6 | V | | 4 |+| Voltage range, Y, Z, A, and B | VI/VO | -0.5 | | 4 | V | | 4 |+| Differential output voltage | /VOD/ | | | 1 | V | | 4 |+| Electrostatic discharge, Y, Z, A, B, and GND | ESD | | | 12 | kV | Class 3, A (MIL-STD-883C Method 3015.7) | 4 |+| Electrostatic discharge, Y, Z, A, B, and GND | ESD | | | 600 | V | Class 3, B (MIL-STD-883C Method 3015.7) | 4 |+| Electrostatic discharge, all pins | ESD | | | 7 | kV | Class 3, A (MIL-STD-883C Method 3015.7) | 4 |+| Electrostatic discharge, all pins | ESD | | | 500 | V | Class 3, B (MIL-STD-883C Method 3015.7) | 4 |+| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |+| Lead temperature | | | | 250 | °C | 1.6 mm (1/16 inch) from case for 10 seconds | 4 |+| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | | 4 |+| High-level input voltage | VIH | 2 | | | V | | 4 |+| Low-level input voltage | VIL | | | 0.8 | V | | 4 |+| Magnitude of differential input voltage | /VID/ | 0.1 | | 0.6 | V | | 4 |+| Magnitude of differential output voltage with disabled driver | /VOD(dis)/ | | | 520 | mV | | 4 |+| Driver output voltage | VOY or VOZ | 0 | | 2.4 | V | | 4 |+| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |+| Power rating, PW(16) package | PD | | | 839 | mW | TA ≤ 25°C | 4 |+| Power rating, PW(16) package at TA = 85°C | PD | | | 437 | mW | TA = 85°C | 4 | ## CAD (KiCad official)
package.json+3−3@@ -1,6 +1,6 @@ { "slug": "sn65lvds050ipwrq1",- "version": "0.1.4",+ "version": "0.1.5", "type": "component", "description": "Texas Instruments LVDS ICs, TSSOP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -53,7 +53,7 @@ "mouser": "595-N65LVDS050IPWRQ1" }, "distributor_check": {- "checked_at": "2026-11-16T18:21:43Z",+ "checked_at": "2026-11-16T18:34:34Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-30094-2-ND",@@ -217,7 +217,7 @@ "zmin_mm": -0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "10a4e1ac7f6a9ecdc6a714c9b0cde37d2d923eec4051519d8df7277ed57b2579",+ "sha256": "d154339edc8775a53c4c8f5dc324e82e6c22fa48905aa9d288b54f0936938810", "checked": "2026-11-16", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+7−6@@ -4,7 +4,7 @@ "slug": "sn65lvds050ipwrq1", "title": "SN65LVDS050IPWRQ1", "brief": "Texas Instruments LVDS ICs, TSSOP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.4",+ "version": "0.1.5", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -36,7 +36,7 @@ "mouser": "595-N65LVDS050IPWRQ1" }, "distributor_check": {- "checked_at": "2026-11-16T18:21:43Z",+ "checked_at": "2026-11-16T18:34:34Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-30094-2-ND",@@ -159,8 +159,7 @@ "described": 16, "cites_pages": true, "refuses_to_fabricate": true- },- "datasheet_names": "datasheet names confirmed by reviewer part-reviewer (ray review, verify triage) against figure, p.1 (SN65LVDS050D / SN65LVDS050PW (TOP VIEW))"+ } }, "viewers": { "symbol": "viewers/symbol.html",@@ -201,7 +200,7 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "10a4e1ac7f6a9ecdc6a714c9b0cde37d2d923eec4051519d8df7277ed57b2579",+ "sha256": "d154339edc8775a53c4c8f5dc324e82e6c22fa48905aa9d288b54f0936938810", "checked": "2026-11-16", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -1016,5 +1015,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Texas Instruments LVDS ICs, TSSOP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
sn65lvds050ipwrq1.lbr+3−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet</description>+<description>Texas Instruments LVDS ICs, TSSOP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <packages> <package name="TSSOP-16_4.4x5mm_P0.65mm"> <description>TSSOP-16, 4.4 x 5 mm, 0.65 mm pitch</description>@@ -90,7 +90,7 @@ </packages> <symbols> <symbol name="SN65LVDS050IPWRQ1">- <description>Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet</description>+ <description>Texas Instruments LVDS ICs, TSSOP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/> <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/> <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>@@ -117,7 +117,7 @@ </symbols> <devicesets> <deviceset name="SN65LVDS050IPWRQ1" prefix="U">- <description>Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet</description>+ <description>Texas Instruments LVDS ICs, TSSOP-16. Pinout settled in review by an AI reviewer against the manufacturer's datasheet</description> <gates> <gate name="G$1" symbol="SN65LVDS050IPWRQ1" x="0" y="0"/> </gates>