main
Ray Publish 0.1.0 6d16938
{
  "slug": "sn65lvds049pw",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LVDS ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "sn65lvds049pw",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sn65lvds049pw.kicad_sym",
    "sn65lvds049pw.kicad_mod",
    "sn65lvds049pw.glb",
    "sn65lvds049pw.step",
    "sn65lvds049pw.lbr",
    "docs/hero.png",
    "docs/sn65lvds049pw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sn65lvds049pw-hero.glb",
    "sn65lvds049pw-hero.overlay.json",
    "sn65lvds049pw-etched.glb"
  ],
  "component": {
    "mpn": "SN65LVDS049PW",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "LVDS ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/sn65lvds049.pdf",
    "parts": {
      "symbol": "sn65lvds049pw.kicad_sym",
      "footprint": "sn65lvds049pw.kicad_mod",
      "model_3d": "sn65lvds049pw-hero.glb",
      "model_3d_plain": "sn65lvds049pw-etched.glb",
      "model_3d_step": "sn65lvds049pw-etched.step",
      "model_3d_step_plain": "sn65lvds049pw.step",
      "lbr": "sn65lvds049pw.lbr"
    },
    "distributor_links": {
      "lcsc": "C206168",
      "digikey": "296-15341-5-ND",
      "mouser": "595-SN65LVDS049PW"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T08:57:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-15341-5-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-SN65LVDS049PW",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RIN1-",
        "type": "input",
        "description": "Differential (LVDS) inverting input of receiver channel 1; the receiver common-mode input range is 0.05 V to 2.35 V for VID of ±100 mV."
      },
      {
        "number": "2",
        "name": "RIN1+",
        "type": "input",
        "description": "Differential (LVDS) noninverting input of receiver channel 1; the receiver common-mode input range is 0.05 V to 2.35 V for VID of ±100 mV."
      },
      {
        "number": "3",
        "name": "RIN2+",
        "type": "input",
        "description": "Differential (LVDS) noninverting input of receiver channel 2; the receiver common-mode input range is 0.05 V to 2.35 V for VID of ±100 mV."
      },
      {
        "number": "4",
        "name": "RIN2-",
        "type": "input",
        "description": "Differential (LVDS) inverting input of receiver channel 2; the receiver common-mode input range is 0.05 V to 2.35 V for VID of ±100 mV."
      },
      {
        "number": "5",
        "name": "DOUT2-",
        "type": "output",
        "description": "Differential (LVDS) inverting output of driver channel 2, high impedance when the driver is disabled."
      },
      {
        "number": "6",
        "name": "DOUT2+",
        "type": "output",
        "description": "Differential (LVDS) noninverting output of driver channel 2, high impedance when the driver is disabled."
      },
      {
        "number": "7",
        "name": "DOUT1+",
        "type": "output",
        "description": "Differential (LVDS) noninverting output of driver channel 1, high impedance when the driver is disabled."
      },
      {
        "number": "8",
        "name": "DOUT1-",
        "type": "output",
        "description": "Differential (LVDS) inverting output of driver channel 1, high impedance when the driver is disabled."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "input",
        "description": "Driver and receiver inverse-enable; the outputs are disabled when this input is high, and it has VIH of 2 V minimum and VIL of 0.8 V maximum."
      },
      {
        "number": "10",
        "name": "DIN1",
        "type": "input",
        "description": "LVTTL input for driver channel 1 with VIH of 2 V minimum and VIL of 0.8 V maximum."
      },
      {
        "number": "11",
        "name": "DIN2",
        "type": "input",
        "description": "LVTTL input for driver channel 2 with VIH of 2 V minimum and VIL of 0.8 V maximum."
      },
      {
        "number": "12",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, 3 V minimum to 3.6 V maximum with 3.3 V nominal."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "14",
        "name": "ROUT2",
        "type": "output",
        "description": "LVTTL output of receiver channel 2, high impedance when the receiver is disabled."
      },
      {
        "number": "15",
        "name": "ROUT1",
        "type": "output",
        "description": "LVTTL output of receiver channel 1, high impedance when the receiver is disabled."
      },
      {
        "number": "16",
        "name": "EN",
        "type": "input",
        "description": "Driver and receiver enable; the outputs are enabled only when this input is high and EN is low or open, with VIH of 2 V minimum and VIL of 0.8 V maximum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet writes the enable pins with an overbar (EN and EN-bar). Text extraction shows both as ; The TI addendum lists the SN65LVDS049PW as the only package in the TSSOP-16 family, so the pinout is"
        ],
        "pages_sent": 34,
        "cost_usd": 0.1313,
        "at": "2026-11-11T08:57:44"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/sn65lvds049.pdf",
        "pages": 34,
        "sha256": "b71392d50ab5c434",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "sn65lvds049pw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sn65lvds049pw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1df7dbf27b0f42193893b3782f0b8dea9b2062c4af9045a2642cf9f2b0adbb0",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PW0016A",
      "source_page": 31,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          6.2,
          6.6
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "sn65lvds049pw.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}