main
Ray
Publish 0.1.0
b0d0a79
SN65LVDM176DR
Texas Instruments · LVDS ICs · SOIC-8
SN65LVDM176DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver output is high when VID ≥ 50 mV and low when VID ≤ −50 mV with RE low, and goes high-impedance when RE is high; it is specified at VOH ≥ 2.4 V at IOH = −8 mA and VOL ≤ 0.4 V at IOL = 8 mA. |
| 2 | RE | input | Active-low receiver enable: driving it high disables the receiver and places R in high impedance, with LVTTL input levels (VIH 2 V min, VIL 0.8 V max) that are 5-V tolerant. |
| 3 | DE | input | Active-high driver enable: when low, the driver outputs A and B are placed in high impedance, with LVTTL input levels (VIH 2 V min, VIL 0.8 V max) that are 5-V tolerant. |
| 4 | D | input | Driver data input: with DE high, a high on D drives A high and B low, and a low drives A low and B high, with LVTTL levels that are 5-V tolerant. |
| 5 | GND | power_in | Network ground reference; all voltages except the differential bus voltage are referenced to this terminal, and the receiver tolerates up to 1 V of ground potential difference between transmitter and receiver. |
| 6 | A | bidirectional | Noninverting differential bus terminal used as the driver output and receiver input, rated −0.5 V to 4 V absolute maximum. |
| 7 | B | bidirectional | Inverting differential bus terminal used as the driver output and receiver input, rated −0.5 V to 4 V absolute maximum. |
| 8 | VCC | power_in | Single 3.3-V supply pin, specified from 3 V minimum to 3.6 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| Magnitude of differential input voltage | /VID/ | 0.1 | 0.6 | V | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Supply current, driver and receiver enabled | ICC | 10 | 15 | mA | No receiver load, driver RL = 50 Ω | 4 | |
| Supply current, driver enabled, receiver disabled | ICC | 9 | 15 | mA | RL = 50 Ω | 4 | |
| Supply current, driver disabled, receiver enabled | ICC | 1.8 | 5 | mA | No load | 4 | |
| Supply current, disabled | ICC | 0.5 | 2 | mA | 4 | ||
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | RL = 50 Ω, See Figure 2 | 5 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | 50 | mV | RL = 50 Ω, See Figure 3 | 5 | |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | 50 | mV | See Figure 4 | 5 | |
| Peak-to-peak common-mode output voltage | VOC(PP) | 50 | 150 | mV | See Figure 4 | 5 | |
| High-level input current, DE | IIH | 0.5 | 10 | µA | VIH = 5 V | 5 | |
| High-level input current, D | IIH | 2 | 20 | µA | VIH = 5 V | 5 | |
| Low-level input current, DE | IIL | -10 | -0.5 | µA | VIL = 0.8 V | 5 | |
| Low-level input current, D | IIL | 2 | 10 | µA | VIL = 0.8 V | 5 | |
| Short-circuit output current | IOS | -10 | mA | VOA or VOB = 0 V | 5 | ||
| Positive-going differential input voltage threshold | VIT+ | 50 | mV | See Figure 6 | 5 | ||
| Negative-going differential input voltage threshold | VIT- | -50 | mV | See Figure 6 | 5 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -8 mA | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 8 mA | 5 | ||
| Input current (A or B inputs) | II | -20 | -2 | µA | VI = 0 V | 5 | |
| Input current (A or B inputs) | II | -1.2 | µA | VI = 2.4 V | 5 | ||
| Power-off input current (A or B inputs) | I(OFF) | 20 | µA | VCC = 0 V or 1.8 V | 5 | ||
| High-level input current (enables) | IIH | 10 | µA | VIH = 5 V | 5 | ||
| Low-level input current (enables) | IIL | 10 | µA | VIL = 0.8 V | 5 | ||
| High-impedance output current | IOZ | -1 | 1 | µA | VO = 0 V or 5 V | 5 | |
| Propagation delay time, low-to-high-level output (driver) | tPLH | 0.5 | 1.7 | 2.7 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 |
| Propagation delay time, high-to-low-level output (driver) | tPHL | 0.5 | 1.7 | 2.7 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 |
| Differential output signal rise time | tr | 0.6 | 1 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 | |
| Differential output signal fall time | tf | 0.6 | 1 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 | |
| Part-to-part skew (driver) | tsk(pp) | 1 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 | ||
| Propagation delay time, high-impedance-to-high-level output (driver enable) | tPZH | 8 | 12 | ns | See Figure 5 | 6 | |
| Propagation delay time, high-impedance-to-low-level output (driver enable) | tPZL | 7 | 10 | ns | See Figure 5 | 6 | |
| Propagation delay time, high-level-to-high-impedance output (driver disable) | tPHZ | 3 | 10 | ns | See Figure 5 | 6 | |
| Propagation delay time, low-level-to-high-impedance output (driver disable) | tPLZ | 4 | 10 | ns | See Figure 5 | 6 | |
| Propagation delay time, low-to-high-level output (receiver) | tPLH | 2.3 | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 7 | 6 |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | 2.3 | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 7 | 6 |
| Output signal rise time (receiver) | tr | 0.8 | 1.5 | ns | CL = 10 pF, See Figure 7 | 6 | |
| Output signal fall time (receiver) | tf | 0.8 | 1.5 | ns | CL = 10 pF, See Figure 7 | 6 | |
| Part-to-part skew (receiver) | tsk(pp) | 1 | ns | CL = 10 pF, See Figure 7 | 6 | ||
| Propagation delay time, high-level-to-high-impedance output (receiver enable) | tPZH | 3 | 10 | ns | See Figure 8 | 6 | |
| Propagation delay time, low-level-to-low-impedance output (receiver enable) | tPZL | 3 | 10 | ns | See Figure 8 | 6 | |
| Propagation delay time, high-impedance-to-high-level output (receiver disable) | tPHZ | 4 | 10 | ns | See Figure 8 | 6 | |
| Propagation delay time, low-impedance-to-high-level output (receiver disable) | tPLZ | 6 | 10 | ns | See Figure 8 | 6 | |
| Supply voltage | VCC | -0.5 | 4 | V | 3 | ||
| Input voltage range, D, R, DE, RE | -0.5 | 6 | V | 3 | |||
| Input voltage range, A or B | -0.5 | 4 | V | 3 | |||
| Electrostatic discharge, A pin | 15 | kV | Class 3, pins A, B and GND | 3 | |||
| Electrostatic discharge, B pin | 600 | V | Class 3, pins A, B and GND | 3 | |||
| Electrostatic discharge, all terminals, A | 7 | kV | Class 3, all terminals | 3 | |||
| Electrostatic discharge, all terminals, B | 500 | V | Class 3, all terminals | 3 | |||
| Continuous total power dissipation, D package | 725 | mW | TA ≤ 25°C | 4 | |||
| Continuous total power dissipation, D package | 377 | mW | TA = 85°C | 4 | |||
| Operating free-air temperature range | TA | -40 | 85 | °C | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 |
CAD (KiCad official)
- Symbol:
SN65LVDM176DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn65lvdm176dr-etched.step/sn65lvdm176dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvdm176dr.step/sn65lvdm176dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
b63d98ac2e028787, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SN65LVDM176DR
**Texas Instruments** · LVDS ICs · SOIC-8
SN65LVDM176DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver output is high when VID ≥ 50 mV and low when VID ≤ −50 mV with RE low, and goes high-impedance when RE is high; it is specified at VOH ≥ 2.4 V at IOH = −8 mA and VOL ≤ 0.4 V at IOL = 8 mA. |
| 2 | RE | input | Active-low receiver enable: driving it high disables the receiver and places R in high impedance, with LVTTL input levels (VIH 2 V min, VIL 0.8 V max) that are 5-V tolerant. |
| 3 | DE | input | Active-high driver enable: when low, the driver outputs A and B are placed in high impedance, with LVTTL input levels (VIH 2 V min, VIL 0.8 V max) that are 5-V tolerant. |
| 4 | D | input | Driver data input: with DE high, a high on D drives A high and B low, and a low drives A low and B high, with LVTTL levels that are 5-V tolerant. |
| 5 | GND | power_in | Network ground reference; all voltages except the differential bus voltage are referenced to this terminal, and the receiver tolerates up to 1 V of ground potential difference between transmitter and receiver. |
| 6 | A | bidirectional | Noninverting differential bus terminal used as the driver output and receiver input, rated −0.5 V to 4 V absolute maximum. |
| 7 | B | bidirectional | Inverting differential bus terminal used as the driver output and receiver input, rated −0.5 V to 4 V absolute maximum. |
| 8 | VCC | power_in | Single 3.3-V supply pin, specified from 3 V minimum to 3.6 V maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | | 4 |
| High-level input voltage | VIH | 2 | | | V | | 4 |
| Low-level input voltage | VIL | | | 0.8 | V | | 4 |
| Magnitude of differential input voltage | /VID/ | 0.1 | | 0.6 | V | | 4 |
| Operating free-air temperature | TA | -40 | | 85 | °C | | 4 |
| Supply current, driver and receiver enabled | ICC | | 10 | 15 | mA | No receiver load, driver RL = 50 Ω | 4 |
| Supply current, driver enabled, receiver disabled | ICC | | 9 | 15 | mA | RL = 50 Ω | 4 |
| Supply current, driver disabled, receiver enabled | ICC | | 1.8 | 5 | mA | No load | 4 |
| Supply current, disabled | ICC | | 0.5 | 2 | mA | | 4 |
| Differential output voltage magnitude | /VOD/ | 247 | 340 | 454 | mV | RL = 50 Ω, See Figure 2 | 5 |
| Change in differential output voltage magnitude between logic states | Δ/VOD/ | -50 | | 50 | mV | RL = 50 Ω, See Figure 3 | 5 |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -50 | | 50 | mV | See Figure 4 | 5 |
| Peak-to-peak common-mode output voltage | VOC(PP) | | 50 | 150 | mV | See Figure 4 | 5 |
| High-level input current, DE | IIH | | 0.5 | 10 | µA | VIH = 5 V | 5 |
| High-level input current, D | IIH | | 2 | 20 | µA | VIH = 5 V | 5 |
| Low-level input current, DE | IIL | -10 | | -0.5 | µA | VIL = 0.8 V | 5 |
| Low-level input current, D | IIL | | 2 | 10 | µA | VIL = 0.8 V | 5 |
| Short-circuit output current | IOS | -10 | | | mA | VOA or VOB = 0 V | 5 |
| Positive-going differential input voltage threshold | VIT+ | | | 50 | mV | See Figure 6 | 5 |
| Negative-going differential input voltage threshold | VIT- | -50 | | | mV | See Figure 6 | 5 |
| High-level output voltage | VOH | 2.4 | | | V | IOH = -8 mA | 5 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = 8 mA | 5 |
| Input current (A or B inputs) | II | -20 | | -2 | µA | VI = 0 V | 5 |
| Input current (A or B inputs) | II | | | -1.2 | µA | VI = 2.4 V | 5 |
| Power-off input current (A or B inputs) | I(OFF) | | | 20 | µA | VCC = 0 V or 1.8 V | 5 |
| High-level input current (enables) | IIH | | | 10 | µA | VIH = 5 V | 5 |
| Low-level input current (enables) | IIL | | | 10 | µA | VIL = 0.8 V | 5 |
| High-impedance output current | IOZ | -1 | | 1 | µA | VO = 0 V or 5 V | 5 |
| Propagation delay time, low-to-high-level output (driver) | tPLH | 0.5 | 1.7 | 2.7 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 |
| Propagation delay time, high-to-low-level output (driver) | tPHL | 0.5 | 1.7 | 2.7 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 |
| Differential output signal rise time | tr | | 0.6 | 1 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 |
| Differential output signal fall time | tf | | 0.6 | 1 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 |
| Part-to-part skew (driver) | tsk(pp) | | | 1 | ns | RL = 50 Ω, CL = 10 pF, See Figure 3 | 6 |
| Propagation delay time, high-impedance-to-high-level output (driver enable) | tPZH | | 8 | 12 | ns | See Figure 5 | 6 |
| Propagation delay time, high-impedance-to-low-level output (driver enable) | tPZL | | 7 | 10 | ns | See Figure 5 | 6 |
| Propagation delay time, high-level-to-high-impedance output (driver disable) | tPHZ | | 3 | 10 | ns | See Figure 5 | 6 |
| Propagation delay time, low-level-to-high-impedance output (driver disable) | tPLZ | | 4 | 10 | ns | See Figure 5 | 6 |
| Propagation delay time, low-to-high-level output (receiver) | tPLH | 2.3 | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 7 | 6 |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | 2.3 | 3.7 | 4.5 | ns | CL = 10 pF, See Figure 7 | 6 |
| Output signal rise time (receiver) | tr | | 0.8 | 1.5 | ns | CL = 10 pF, See Figure 7 | 6 |
| Output signal fall time (receiver) | tf | | 0.8 | 1.5 | ns | CL = 10 pF, See Figure 7 | 6 |
| Part-to-part skew (receiver) | tsk(pp) | | | 1 | ns | CL = 10 pF, See Figure 7 | 6 |
| Propagation delay time, high-level-to-high-impedance output (receiver enable) | tPZH | | 3 | 10 | ns | See Figure 8 | 6 |
| Propagation delay time, low-level-to-low-impedance output (receiver enable) | tPZL | | 3 | 10 | ns | See Figure 8 | 6 |
| Propagation delay time, high-impedance-to-high-level output (receiver disable) | tPHZ | | 4 | 10 | ns | See Figure 8 | 6 |
| Propagation delay time, low-impedance-to-high-level output (receiver disable) | tPLZ | | 6 | 10 | ns | See Figure 8 | 6 |
| Supply voltage | VCC | -0.5 | | 4 | V | | 3 |
| Input voltage range, D, R, DE, RE | | -0.5 | | 6 | V | | 3 |
| Input voltage range, A or B | | -0.5 | | 4 | V | | 3 |
| Electrostatic discharge, A pin | | | | 15 | kV | Class 3, pins A, B and GND | 3 |
| Electrostatic discharge, B pin | | | | 600 | V | Class 3, pins A, B and GND | 3 |
| Electrostatic discharge, all terminals, A | | | | 7 | kV | Class 3, all terminals | 3 |
| Electrostatic discharge, all terminals, B | | | | 500 | V | Class 3, all terminals | 3 |
| Continuous total power dissipation, D package | | | | 725 | mW | TA ≤ 25°C | 4 |
| Continuous total power dissipation, D package | | | | 377 | mW | TA = 85°C | 4 |
| Operating free-air temperature range | TA | -40 | | 85 | °C | | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Lead temperature | | | | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 3 |
## CAD (KiCad official)
- Symbol: `SN65LVDM176DR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `sn65lvdm176dr-etched.step` / `sn65lvdm176dr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sn65lvdm176dr.step` / `sn65lvdm176dr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/sn65lvdm176.pdf) (26 pp, sha256 `b63d98ac2e028787`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sn65lvdm176dr-datasheet.pdf)