component
SN65LVDM176DGK
Public Made by Adomby adom
Texas Instruments Buffers, Drivers, Receivers, Transceivers, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSN65LVDM176DGK
Texas Instruments · Buffers, Drivers, Receivers, Transceivers · VSSOP-8
SN65LVDM176DGK from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver output with VOH = 2.4 V and VOL = 0.4 V; high impedance when RE is high or VCC < 1.5 V |
| 2 | RE | input | Receiver enable (active low); disables receiver output placing it in high impedance state when high |
| 3 | DE | input | Driver enable (active high); places driver outputs A and B in high impedance state when low |
| 4 | D | input | Driver data input; logic high outputs A high and B low, logic low outputs A low and B high when driver enabled |
| 5 | GND | power_in | Ground, signal reference |
| 6 | A | bidirectional | Differential bus pair A; driver output when enabled or receiver input depending on configuration; ±247 to ±454 mV differential with 50 Ω load |
| 7 | B | bidirectional | Differential bus pair B; driver output when enabled or receiver input depending on configuration; ±247 to ±454 mV differential with 50 Ω load |
| 8 | VCC | power_in | Power supply; 3 to 3.6 V (3.3 V nominal) with supply current 10 to 15 mA typical when driver and receiver enabled |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Logic |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN65LVDM176DGK - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
sn65lvdm176dgk-etched.step/sn65lvdm176dgk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lvdm176dgk.step/sn65lvdm176dgk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
aa9521bde0736639, retrieved 2026-10-01, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).