component
SN65LBC182P
Public Made by Adomby adom
Texas Instruments RS-485 / RS-422 ICs, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN65LBC182P
Texas Instruments · RS-485 / RS-422 ICs · PDIP-8
SN65LBC182P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver output; the absolute maximum receiver output current is ±20 mA. |
| 2 | RE | input | Active-low receiver enable input; the receiver output is enabled when RE is low and goes high-impedance when RE is high. |
| 3 | DE | input | Active-high driver enable input; the driver outputs are enabled when DE is high and are high-impedance when DE is low. |
| 4 | D | input | Driver input that sets the differential bus output state when the driver is enabled. |
| 5 | GND | power_in | Device ground. |
| 6 | A | bidirectional | Non-inverting differential bus I/O; the bus voltage at any bus terminal is limited to -7 V to 12 V in recommended operating conditions (-15 V to 15 V absolute maximum). |
| 7 | B | bidirectional | Inverting differential bus I/O; the bus voltage at any bus terminal is limited to -7 V to 12 V in recommended operating conditions (-15 V to 15 V absolute maximum). |
| 8 | VCC | power_in | Device supply voltage, 4.75 V to 5.25 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Interface |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
SN65LBC182P - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
sn65lbc182p-etched.step/sn65lbc182p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65lbc182p.step/sn65lbc182p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
cb6be40f62020d42, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).